Loctite EA 3463 Metal Magic Steel Epoxy Stick 4OZ

Loctite EA 3463 (Fixmaster Metal Magic Steel) is a two-component, steel-filled epoxy stick for restoring metal parts worn by mechanical wear or corrosion. Hand-mixable and applied like a putty; cures to a steel-like finish with high compressive strength. Typical uses include stopping leaks in pipes and tanks, filling oversized bolt holes, smoothing welds and repairing non-structural casting defects. Cures under water and adheres to most damp surfaces.

Technology epoxy; two components (resin & hardener), room-temperature cure after mixing. Resin grey paste, hardener black paste, mixed metallic-black. Application temperature 15 to 30 degC (59 to 86 degF). Gel time approximately 3 minutes (ASTM D2471); working life approximately 4 minutes @ 25 degC; cure time approximately 10 minutes @ 25 degC. Cured (1 week @ 23 degC)

glass transition temperature (Tg) approximately 54 degC (TMA, ISO 11359-2); Shore D hardness approximately 70; compressive strength high; lap shear strength on grit-blasted mild steel per ISO 4587. Not for pure-oxygen / oxygen-rich systems or as a sealant for chlorine or strong oxidisers. PDF file (TDS) attached. 4 oz (113 g) stick.

Fill size

4 oz

Chemical base

epoxy

Standards

ASTM D2471, ISO 11359-2, ISO 4587

Material

Steel-filled epoxy

HS Code

3214.10