Adapter sleeves mount tapered-bore bearings (suffix K) on plain shafts: the sleeve is drawn into the bearing bore with its lock nut, expanding the bearing onto the shaft. The designation follows the bearing series and bore code (H 209 fits a 2209 K or 1209 K bearing of 45 mm bore on a 40 mm shaft; H 309 the 300 series), HA/HE sleeves are the 3xx/2xx sizes for 22xxx K and 23xxx K spherical roller bearings, OH sleeves the large hydraulic sizes, SNW/SNP the inch-shaft series. Withdrawal sleeves AH, AHX and AOH are pressed in from the opposite side and used where the bearing is located by a shaft shoulder. The finder lists the catalogue by shaft diameter with the bearing bore each sleeve serves.
The shaft diameter (d1) is always smaller than the bearing bore: for a 2209 K bearing (bore 45 mm) the H 209 sleeve fits a 40 mm shaft. Lock nuts KM and locking washers MB are included in the H/HA/HE designation; OH sleeves are supplied with HM nuts. For large sizes the hydraulic mounting method (oil injection through the sleeve, suffix H) is standard and the drive-up distance must be measured with a gauge, not judged by torque.
Coverage: 987 of 987 catalogue rows with a readable size are listed (1,592 rows in these categories in total; the remainder can be found through the site search by part number).
| Shaft diameter d1 | For bearing bore | Designation | Type | Part number |
|---|---|---|---|---|
| 17 mm | 20 mm | H204 | H | H204 |
| 19.05 mm | 25 mm | HE205 | HE (for 23xxx K) | HE205 |
| 19.05 mm | 25 mm | HE2305 | HE (for 23xxx K) | HE2305 |
| 19.05 mm | 25 mm | HE305 | HE (for 23xxx K) | HE305 |
| 20 mm | — | H305C | H | H305C |
| 20 mm | — | H305E | H | H305E |
| 20 mm | 25 mm | H205 | H | H205 |
| 20 mm | 25 mm | H2305 | H | H2305 |
| 20 mm | 25 mm | H305 | H | H305 |
| 20 mm | 25 mm | H 205 | H | H 205 |
| 23.81 mm | 30 mm | HA206 | HA (for 22xxx K) | HA206 |
| 23.81 mm | 30 mm | HA306 | HA (for 22xxx K) | HA306 |
| 25 mm | — | H306C | H | H306C |
| 25 mm | — | H306E | H | H306E |
| 25 mm | 30 mm | H206 | H | H206 |
| 25 mm | 30 mm | H2306 | H | H2306 |
| 25 mm | 30 mm | H306 | H | H306 |
| 25 mm | 30 mm | H 206 | H | H 206 |
| 25 mm | 30 mm | H 306 | H | H 306 |
| 25.4 mm | 30 mm | HE206 | HE (for 23xxx K) | HE206 |
| 25.4 mm | 30 mm | HE2306 | HE (for 23xxx K) | HE2306 |
| 25.4 mm | 30 mm | HE306 | HE (for 23xxx K) | HE306 |
| 30 mm | — | H307C | H | H307C |
| 30 mm | — | H307E | H | H307E |
| 30 mm | 35 mm | H207 | H | H207 |
| 30 mm | 35 mm | H2307 | H | H2307 |
| 30 mm | 35 mm | H307 | H | H307 |
| 30 mm | 35 mm | H 307 | H | H 307 |
| 30.16 mm | 35 mm | HA207 | HA (for 22xxx K) | HA207 |
| 30.16 mm | 35 mm | HA2307 | HA (for 22xxx K) | HA2307 |
| 30.16 mm | 35 mm | HA307 | HA (for 22xxx K) | HA307 |
| 31.75 mm | 40 mm | HE208 | HE (for 23xxx K) | HE208 |
| 31.75 mm | 40 mm | HE2308 | HE (for 23xxx K) | HE2308 |
| 31.75 mm | 40 mm | HE308 | HE (for 23xxx K) | HE308 |
| 34.92 mm | 40 mm | HS308 | H | HS308 |
| 35 mm | — | H2308E | H | H2308E |
| 35 mm | — | H308C | H | H308C |
| 35 mm | — | H308E | H | H308E |
| — | 35 mm | H 2307 | H | H 2307 |
| 35 mm | 40 mm | H208 | H | H208 |
| 35 mm | 40 mm | H2308 | H | H2308 |
| 35 mm | 40 mm | H308 | H | H308 |
| 36.51 mm | — | HA309E | HA (for 22xxx K) | HA309E |
| 36.51 mm | 45 mm | HA209 | HA (for 22xxx K) | HA209 |
| 36.51 mm | 45 mm | HA2309 | HA (for 22xxx K) | HA2309 |
| 36.51 mm | 45 mm | HA309 | HA (for 22xxx K) | HA309 |
| 38.1 mm | — | HE309E | HE (for 23xxx K) | HE309E |
| 38.1 mm | 45 mm | HE209 | HE (for 23xxx K) | HE209 |
| 38.1 mm | 45 mm | HE2309 | HE (for 23xxx K) | HE2309 |
| 38.1 mm | 45 mm | HE309 | HE (for 23xxx K) | HE309 |
| 40 mm | — | H309C | H | H309C |
| 40 mm | — | H309E | H | H309E |
| — | 40 mm | H 2308 | H | H 2308 |
| 40 mm | 45 mm | H209 | H | H209 |
| 40 mm | 45 mm | H2309 | H | H2309 |
| 40 mm | 45 mm | H309 | H | H309 |
| 40 mm | 45 mm | H 209 | H | H 209 |
| 42.86 mm | — | HA310E | HA (for 22xxx K) | HA310E |
| 42.86 mm | 50 mm | HA210 | HA (for 22xxx K) | HA210 |
| 42.86 mm | 50 mm | HA2310 | HA (for 22xxx K) | HA2310 |
| 42.86 mm | 50 mm | HA310 | HA (for 22xxx K) | HA310 |
| 44.45 mm | — | HE310E | HE (for 23xxx K) | HE310E |
| 44.45 mm | 50 mm | HE210 | HE (for 23xxx K) | HE210 |
| 44.45 mm | 50 mm | HE2310 | HE (for 23xxx K) | HE2310 |
| 44.45 mm | 50 mm | HE310 | HE (for 23xxx K) | HE310 |
| 45 mm | — | H310C | H | H310C |
| 45 mm | — | H310E | H | H310E |
| 45 mm | 50 mm | H210 | H | H210 |
| 45 mm | 50 mm | H2310 | H | H2310 |
| 45 mm | 50 mm | H310 | H | H310 |
| 49.21 mm | — | HA311E | HA (for 22xxx K) | HA311E |
| 49.21 mm | 55 mm | HA211 | HA (for 22xxx K) | HA211 |
| 49.21 mm | 55 mm | HA2311 | HA (for 22xxx K) | HA2311 |
| 49.21 mm | 55 mm | HA311 | HA (for 22xxx K) | HA311 |
| 50 mm | — | H311C | H | H311C |
| 50 mm | — | H311E | H | H311E |
| — | 50 mm | H 2310 | H | H 2310 |
| 50 mm | 55 mm | H211 | H | H211 |
| 50 mm | 55 mm | H2311 | H | H2311 |
| 50 mm | 55 mm | H311 | H | H311 |
| 50 mm | 55 mm | H 211 | H | H 211 |
| 50 mm | 55 mm | H 311 | H | H 311 |
| 50.8 mm | — | HE211B | HE (for 23xxx K) | HE211B |
| 50.8 mm | — | HE2311B | HE (for 23xxx K) | HE2311B |
| 50.8 mm | — | HE311B | HE (for 23xxx K) | HE311B |
| 50.8 mm | — | HE311BE | HE (for 23xxx K) | HE311BE |
| 55 mm | — | H312E | H | H312E |
| 55 mm | 60 mm | H212 | H | H212 |
| 55 mm | 60 mm | H2312 | H | H2312 |
| 55 mm | 60 mm | H312 | H | H312 |
| 55 mm | 60 mm | H 312 | H | H 312 |
| 55.56 mm | — | HA313E | HA (for 22xxx K) | HA313E |
| 55.56 mm | 65 mm | HA213 | HA (for 22xxx K) | HA213 |
| 55.56 mm | 65 mm | HA2313 | HA (for 22xxx K) | HA2313 |
| 55.56 mm | 65 mm | HA313 | HA (for 22xxx K) | HA313 |
| 57.15 mm | 65 mm | HE213 | HE (for 23xxx K) | HE213 |
| 57.15 mm | 65 mm | HE2313 | HE (for 23xxx K) | HE2313 |
| 57.15 mm | 65 mm | HE313 | HE (for 23xxx K) | HE313 |
| 60 mm | — | H2313E | H | H2313E |
| 60 mm | — | H313C | H | H313C |
| 60 mm | — | H313E | H | H313E |
| 60 mm | — | H314E | H | H314E |
| 60 mm | 65 mm | H213 | H | H213 |
| 60 mm | 65 mm | H2313 | H | H2313 |
| 60 mm | 65 mm | H313 | H | H313 |
| 60 mm | 65 mm | H 213 | H | H 213 |
| 60 mm | 70 mm | H2314 | H | H2314 |
| 60 mm | 70 mm | H314 | H | H314 |
| 61.91 mm | — | HA315E | HA (for 22xxx K) | HA315E |
| 61.91 mm | 75 mm | HA215 | HA (for 22xxx K) | HA215 |
| 61.91 mm | 75 mm | HA2315 | HA (for 22xxx K) | HA2315 |
| 61.91 mm | 75 mm | HA315 | HA (for 22xxx K) | HA315 |
| 63.5 mm | — | HE315E | HE (for 23xxx K) | HE315E |
| 63.5 mm | 75 mm | HE215 | HE (for 23xxx K) | HE215 |
| 63.5 mm | 75 mm | HE2315 | HE (for 23xxx K) | HE2315 |
| 63.5 mm | 75 mm | HE315 | HE (for 23xxx K) | HE315 |
| 65 mm | — | H315E | H | H315E |
| — | 65 mm | H 2313 | H | H 2313 |
| 65 mm | 75 mm | H215 | H | H215 |
| 65 mm | 75 mm | H2315 | H | H2315 |
| 65 mm | 75 mm | H315 | H | H315 |
| 66.68 mm | 75 mm | HS315 | H | HS315 |
| 68.26 mm | — | HA316E | HA (for 22xxx K) | HA316E |
| 68.26 mm | 80 mm | HA216 | HA (for 22xxx K) | HA216 |
| 68.26 mm | 80 mm | HA2316 | HA (for 22xxx K) | HA2316 |
| 68.26 mm | 80 mm | HA316 | HA (for 22xxx K) | HA316 |
| 69.85 mm | 80 mm | HE216 | HE (for 23xxx K) | HE216 |
| 69.85 mm | 80 mm | HE2316 | HE (for 23xxx K) | HE2316 |
| 69.85 mm | 80 mm | HE316 | HE (for 23xxx K) | HE316 |
| 70 mm | — | H316E | H | H316E |
| — | 70 mm | H 2314 | H | H 2314 |
| 70 mm | 80 mm | H216 | H | H216 |
| 70 mm | 80 mm | H2316 | H | H2316 |
| 70 mm | 80 mm | H316 | H | H316 |
| 70 mm | 80 mm | H 216 | H | H 216 |
| 74.61 mm | — | HA317E | HA (for 22xxx K) | HA317E |
| 74.61 mm | 85 mm | HA217 | HA (for 22xxx K) | HA217 |
| 74.61 mm | 85 mm | HA2317 | HA (for 22xxx K) | HA2317 |
| 74.61 mm | 85 mm | HA317 | HA (for 22xxx K) | HA317 |
| 75 mm | — | H317E | H | H317E |
| 75 mm | 85 mm | H217 | H | H217 |
| 75 mm | 85 mm | H2317 | H | H2317 |
| 75 mm | 85 mm | H317 | H | H317 |
| 76.2 mm | — | HE317E | HE (for 23xxx K) | HE317E |
| 76.2 mm | 85 mm | HE217 | HE (for 23xxx K) | HE217 |
| 76.2 mm | 85 mm | HE2317 | HE (for 23xxx K) | HE2317 |
| 76.2 mm | 85 mm | HE317 | HE (for 23xxx K) | HE317 |
| 80 mm | — | H2318E/L73 | H | H2318E/L73 |
| 80 mm | — | H318E | H | H318E |
| 80 mm | 90 mm | H218 | H | H218 |
| 80 mm | 90 mm | H2318 | H | H2318 |
| 80 mm | 90 mm | H318 | H | H318 |
| 80.96 mm | — | HA318E | HA (for 22xxx K) | HA318E |
| 80.96 mm | 90 mm | HA218 | HA (for 22xxx K) | HA218 |
| 80.96 mm | 90 mm | HA2318 | HA (for 22xxx K) | HA2318 |
| 80.96 mm | 90 mm | HA318 | HA (for 22xxx K) | HA318 |
| 82.55 mm | 90 mm | HE218 | HE (for 23xxx K) | HE218 |
| 82.55 mm | 90 mm | HE2318 | HE (for 23xxx K) | HE2318 |
| 82.55 mm | 90 mm | HE318 | HE (for 23xxx K) | HE318 |
| 82.55 mm | 95 mm | HE219 | HE (for 23xxx K) | HE219 |
| 82.55 mm | 95 mm | HE2319 | HE (for 23xxx K) | HE2319 |
| 82.55 mm | 95 mm | HE319 | HE (for 23xxx K) | HE319 |
| — | 85 mm | H 2317 | H | H 2317 |
| 85 mm | 95 mm | H219 | H | H219 |
| 85 mm | 95 mm | H2319 | H | H2319 |
| 85 mm | 95 mm | H319 | H | H319 |
| 85 mm | 95 mm | H 319 | H | H 319 |
| 87.31 mm | 100 mm | HA3120 | HA (for 22xxx K) | HA3120 |
| 87.31 mm | — | HA2320E | HA (for 22xxx K) | HA2320E |
| 87.31 mm | — | HA320E | HA (for 22xxx K) | HA320E |
| 87.31 mm | 100 mm | HA220 | HA (for 22xxx K) | HA220 |
| 87.31 mm | 100 mm | HA2320 | HA (for 22xxx K) | HA2320 |
| 87.31 mm | 100 mm | HA320 | HA (for 22xxx K) | HA320 |
| 88.9 mm | — | HE320E | HE (for 23xxx K) | HE320E |
| 88.9 mm | 100 mm | HE220 | HE (for 23xxx K) | HE220 |
| 88.9 mm | 100 mm | HE2320 | HE (for 23xxx K) | HE2320 |
| 88.9 mm | 100 mm | HE3120 | HE (for 23xxx K) | HE3120 |
| 88.9 mm | 100 mm | HE320 | HE (for 23xxx K) | HE320 |
| 90 mm | — | H2320E | H | H2320E |
| 90 mm | — | H320E | H | H320E |
| 90 mm | 100 mm | H220 | H | H220 |
| 90 mm | 100 mm | H2320 | H | H2320 |
| 90 mm | 100 mm | H3120 | H | H3120 |
| 90 mm | 100 mm | H320 | H | H320 |
| 90 mm | 100 mm | H 320 | H | H 320 |
| 90 mm | 100 mm | H 220 | H | H 220 |
| 100 mm | — | H2322E | H | H2322E |
| 100 mm | — | H322E | H | H322E |
| — | 100 mm | H 2320 | H | H 2320 |
| 100 mm | 110 mm | H222 | H | H222 |
| 100 mm | 110 mm | H2322 | H | H2322 |
| 100 mm | 110 mm | H3122 | H | H3122 |
| 100 mm | 110 mm | H322 | H | H322 |
| 101.6 mm | — | HE322E | HE (for 23xxx K) | HE322E |
| 101.6 mm | 110 mm | HE222 | HE (for 23xxx K) | HE222 |
| 101.6 mm | 110 mm | HE2322 | HE (for 23xxx K) | HE2322 |
| 101.6 mm | 110 mm | HE3122 | HE (for 23xxx K) | HE3122 |
| 101.6 mm | 110 mm | HE322 | HE (for 23xxx K) | HE322 |
| 106.36 mm | — | HA2324L | HA (for 22xxx K) | HA2324L |
| 106.36 mm | 120 mm | HA2324 | HA (for 22xxx K) | HA2324 |
| 106.36 mm | 120 mm | HA3024 | HA (for 22xxx K) | HA3024 |
| 106.36 mm | 120 mm | HA3124 | HA (for 22xxx K) | HA3124 |
| 107.95 mm | 120 mm | HE2324 | HE (for 23xxx K) | HE2324 |
| 107.95 mm | 120 mm | HE3024 | HE (for 23xxx K) | HE3024 |
| 107.95 mm | 120 mm | HE3124 | HE (for 23xxx K) | HE3124 |
| 110 mm | — | H2324E | H | H2324E |
| 110 mm | — | H2324EH | H | H2324EH |
| 110 mm | — | H2324L | H | H2324L |
| 110 mm | 120 mm | H2324 | H | H2324 |
| 110 mm | 120 mm | H3024 | H | H3024 |
| 110 mm | 120 mm | H3124 | H | H3124 |
| 112.71 mm | — | HA2326L | HA (for 22xxx K) | HA2326L |
| 112.71 mm | — | HA3126E | HA (for 22xxx K) | HA3126E |
| 112.71 mm | — | HA3126L | HA (for 22xxx K) | HA3126L |
| 112.71 mm | — | OSNW126X4.7/16 | inch shaft | OSNW126X4.7/16 |
| 112.71 mm | — | OSNW26X4.7/16 | inch shaft | OSNW26X4.7/16 |
| 112.71 mm | 130 mm | HA2326 | HA (for 22xxx K) | HA2326 |
| 112.71 mm | 130 mm | HA3026 | HA (for 22xxx K) | HA3026 |
| 112.71 mm | 130 mm | HA3126 | HA (for 22xxx K) | HA3126 |
| 114.3 mm | — | HE3126L | HE (for 23xxx K) | HE3126L |
| 114.3 mm | 130 mm | HE2326 | HE (for 23xxx K) | HE2326 |
| 114.3 mm | 130 mm | HE3026 | HE (for 23xxx K) | HE3026 |
| 114.3 mm | 130 mm | HE3126 | HE (for 23xxx K) | HE3126 |
| 115 mm | — | H2326L | H | H2326L |
| 115 mm | — | H3126L | H | H3126L |
| 115 mm | 130 mm | H2326 | H | H2326 |
| 115 mm | 130 mm | H3026 | H | H3026 |
| 115 mm | 130 mm | H3126 | H | H3126 |
| 125 mm | — | H3128L | H | H3128L |
| 125 mm | 140 mm | H2328 | H | H2328 |
| 125 mm | 140 mm | H3028 | H | H3028 |
| 125 mm | 140 mm | H3128 | H | H3128 |
| 125.41 mm | — | HA3128E | HA (for 22xxx K) | HA3128E |
| 125.41 mm | — | HA3128L | HA (for 22xxx K) | HA3128L |
| 125.41 mm | — | OSNW28X4.15/16 | inch shaft | OSNW28X4.15/16 |
| 125.41 mm | 140 mm | HA2328 | HA (for 22xxx K) | HA2328 |
| 125.41 mm | 140 mm | HA3028 | HA (for 22xxx K) | HA3028 |
| 125.41 mm | 140 mm | HA3128 | HA (for 22xxx K) | HA3128 |
| 127 mm | — | HE3128L | HE (for 23xxx K) | HE3128L |
| 127 mm | 140 mm | HE2328 | HE (for 23xxx K) | HE2328 |
| 127 mm | 140 mm | HE3128 | HE (for 23xxx K) | HE3128 |
| — | 130 mm | H 3126 | H | H 3126 |
| 131.76 mm | — | HA3130L | HA (for 22xxx K) | HA3130L |
| 131.76 mm | — | OSNW30X5.3/16 | inch shaft | OSNW30X5.3/16 |
| 131.76 mm | 150 mm | HA3030 | HA (for 22xxx K) | HA3030 |
| 131.76 mm | 150 mm | HA3130 | HA (for 22xxx K) | HA3130 |
| 133.35 mm | — | HE3130L | HE (for 23xxx K) | HE3130L |
| 133.35 mm | 150 mm | HE2330 | HE (for 23xxx K) | HE2330 |
| 133.35 mm | 150 mm | HE3030 | HE (for 23xxx K) | HE3030 |
| 133.35 mm | 150 mm | HE3130 | HE (for 23xxx K) | HE3130 |
| 135 mm | — | H3030E | H | H3030E |
| 135 mm | — | H3130E | H | H3130E |
| 135 mm | — | H3130L | H | H3130L |
| 135 mm | 150 mm | H2330 | H | H2330 |
| 135 mm | 150 mm | H3030 | H | H3030 |
| 135 mm | 150 mm | H3130 | H | H3130 |
| 138.11 mm | — | HA2332L | HA (for 22xxx K) | HA2332L |
| 138.11 mm | — | HA3132E | HA (for 22xxx K) | HA3132E |
| 138.11 mm | — | OSNW32X5.7/16 | inch shaft | OSNW32X5.7/16 |
| 138.11 mm | — | OSNW32X5.7/16H | inch shaft | OSNW32X5.7/16H |
| 138.11 mm | 160 mm | HA2332 | HA (for 22xxx K) | HA2332 |
| 138.11 mm | 160 mm | HA3032 | HA (for 22xxx K) | HA3032 |
| 138.11 mm | 160 mm | HA3132 | HA (for 22xxx K) | HA3132 |
| 139.7 mm | — | OSNW132X5.1/2 | inch shaft | OSNW132X5.1/2 |
| 139.7 mm | 160 mm | HE2332 | HE (for 23xxx K) | HE2332 |
| 139.7 mm | 160 mm | HE3032 | HE (for 23xxx K) | HE3032 |
| 139.7 mm | 160 mm | HE3132 | HE (for 23xxx K) | HE3132 |
| 140 mm | — | H2332L | H | H2332L |
| 140 mm | — | H3032E | H | H3032E |
| 140 mm | — | H3132L | H | H3132L |
| — | 140 mm | H 3028 | H | H 3028 |
| 140 mm | 160 mm | H2332 | H | H2332 |
| 140 mm | 160 mm | H3032 | H | H3032 |
| 140 mm | 160 mm | H3132 | H | H3132 |
| 150 mm | — | H3034E | H | H3034E |
| 150 mm | — | H3134E | H | H3134E |
| 150 mm | — | H3134L | H | H3134L |
| 150 mm | 170 mm | H2334 | H | H2334 |
| 150 mm | 170 mm | H3034 | H | H3034 |
| 150 mm | 170 mm | H3134 | H | H3134 |
| 150.81 mm | — | HA3134E | HA (for 22xxx K) | HA3134E |
| 150.81 mm | — | HA3134L | HA (for 22xxx K) | HA3134L |
| 150.81 mm | — | OSNW34X5.15/16 | inch shaft | OSNW34X5.15/16 |
| 150.81 mm | 170 mm | HA2334 | HA (for 22xxx K) | HA2334 |
| 150.81 mm | 170 mm | HA3034 | HA (for 22xxx K) | HA3034 |
| 150.81 mm | 170 mm | HA3134 | HA (for 22xxx K) | HA3134 |
| 152.4 mm | — | HE3134L | HE (for 23xxx K) | HE3134L |
| 152.4 mm | — | OSNW34X6. | inch shaft | OSNW34X6. |
| 152.4 mm | 170 mm | HE3134 | HE (for 23xxx K) | HE3134 |
| 160 mm | — | H3036E | H | H3036E |
| 160 mm | — | H3136L | H | H3136L |
| 160 mm | 180 mm | H2336 | H | H2336 |
| 160 mm | 180 mm | H3036 | H | H3036 |
| 160 mm | 180 mm | H3136 | H | H3136 |
| 160 mm | 180 mm | H3936 | H | H3936 |
| 163.51 mm | — | HA3136L | HA (for 22xxx K) | HA3136L |
| 163.51 mm | — | OSNW136X6.7/16 | inch shaft | OSNW136X6.7/16 |
| 163.51 mm | — | OSNW36X6.7/16 | inch shaft | OSNW36X6.7/16 |
| 163.51 mm | 180 mm | HA2336 | HA (for 22xxx K) | HA2336 |
| 163.51 mm | 180 mm | HA3036 | HA (for 22xxx K) | HA3036 |
| 163.51 mm | 180 mm | HA3136 | HA (for 22xxx K) | HA3136 |
| 165.1 mm | — | OSNW36X6.1/2 | inch shaft | OSNW36X6.1/2 |
| 165.1 mm | 180 mm | HE3136 | HE (for 23xxx K) | HE3136 |
| 170 mm | — | H3138L | H | H3138L |
| — | 170 mm | H 3034 | H | H 3034 |
| 170 mm | 190 mm | H2338 | H | H2338 |
| 170 mm | 190 mm | H3038 | H | H3038 |
| 170 mm | 190 mm | H3138 | H | H3138 |
| 170 mm | 190 mm | H3938 | H | H3938 |
| 171.45 mm | 190 mm | HE3138 | HE (for 23xxx K) | HE3138 |
| 176.21 mm | — | OSNW38X6.15/16 | inch shaft | OSNW38X6.15/16 |
| 176.21 mm | 190 mm | HA2338 | HA (for 22xxx K) | HA2338 |
| 176.21 mm | 190 mm | HA3038 | HA (for 22xxx K) | HA3038 |
| 176.21 mm | 190 mm | HA3138 | HA (for 22xxx K) | HA3138 |
| 177.8 mm | — | OSNW3040X7H | inch shaft | OSNW3040X7H |
| 177.8 mm | — | OSNW38X7. | inch shaft | OSNW38X7. |
| 177.8 mm | — | OSNW38X7/VU150 | inch shaft | OSNW38X7/VU150 |
| 177.8 mm | 200 mm | HE2340 | HE (for 23xxx K) | HE2340 |
| 177.8 mm | 200 mm | HE3040 | HE (for 23xxx K) | HE3040 |
| 177.8 mm | 200 mm | HE3140 | HE (for 23xxx K) | HE3140 |
| 180 mm | 200 mm | H2340 | H | H2340 |
| 180 mm | 200 mm | H3040 | H | H3040 |
| 180 mm | 200 mm | H3140 | H | H3140 |
| 180 mm | 200 mm | H3940 | H | H3940 |
| 182.56 mm | 200 mm | HA2340 | HA (for 22xxx K) | HA2340 |
| 182.56 mm | 200 mm | HA3040 | HA (for 22xxx K) | HA3040 |
| 182.56 mm | 200 mm | HA3140 | HA (for 22xxx K) | HA3140 |
| 190.5 mm | — | OSNW44X7.1/2 | inch shaft | OSNW44X7.1/2 |
| 200 mm | 220 mm | H2344 | H | H2344 |
| 200 mm | 220 mm | H3044 | H | H3044 |
| 200 mm | 220 mm | H3144 | H | H3144 |
| 201.61 mm | — | OSNW3044X7.15/16 | inch shaft | OSNW3044X7.15/16 |
| 201.61 mm | — | OSNW44X7.15/16 | inch shaft | OSNW44X7.15/16 |
| 203.2 mm | — | OSNW44X8. | inch shaft | OSNW44X8. |
| 220 mm | 240 mm | H2348 | H | H2348 |
| 220 mm | 240 mm | H3048 | H | H3048 |
| 220 mm | 240 mm | H3148 | H | H3148 |
| 240 mm | 260 mm | H2352 | H | H2352 |
| 240 mm | 260 mm | H3052 | H | H3052 |
| 240 mm | 260 mm | H3152 | H | H3152 |
| 260 mm | 280 mm | H2356 | H | H2356 |
| 260 mm | 280 mm | H3056 | H | H3056 |
| 260 mm | 280 mm | H3156 | H | H3156 |
| 280 mm | 300 mm | H3060 | H | H3060 |
| 280 mm | 300 mm | H3160 | H | H3160 |
| 280 mm | 300 mm | H3260 | H | H3260 |
| Shaft diameter d1 | For bearing bore | Designation | Type | Part number |
|---|---|---|---|---|
| 140 mm | — | OH2332H | OH (hydraulic) | OH2332H |
| 140 mm | — | OH3032H | OH (hydraulic) | OH3032H |
| 140 mm | — | OH3132H | OH (hydraulic) | OH3132H |
| 150 mm | — | OH3134H | OH (hydraulic) | OH3134H |
| 160 mm | — | OH2336H | OH (hydraulic) | OH2336H |
| 160 mm | — | OH3036H | OH (hydraulic) | OH3036H |
| 160 mm | — | OH3136H | OH (hydraulic) | OH3136H |
| 170 mm | — | OH2338H | OH (hydraulic) | OH2338H |
| 170 mm | — | OH3138H | OH (hydraulic) | OH3138H |
| 180 mm | — | OH2340H | OH (hydraulic) | OH2340H |
| 180 mm | — | OH3040H | OH (hydraulic) | OH3040H |
| 180 mm | — | OH3140H | OH (hydraulic) | OH3140H |
| 200 mm | — | OH2344H | OH (hydraulic) | OH2344H |
| 200 mm | — | OH3044H | OH (hydraulic) | OH3044H |
| 200 mm | — | OH3144H | OH (hydraulic) | OH3144H |
| 200 mm | — | OH3144HTL | OH (hydraulic) | OH3144HTL |
| 200 mm | — | OH3944H | OH (hydraulic) | OH3944H |
| 220 mm | — | OH2348H | OH (hydraulic) | OH2348H |
| 220 mm | — | OH3048H | OH (hydraulic) | OH3048H |
| 220 mm | — | OH3048HE | OH (hydraulic) | OH3048HE |
| 220 mm | — | OH3148H | OH (hydraulic) | OH3148H |
| 220 mm | — | OH3148HTL | OH (hydraulic) | OH3148HTL |
| 220 mm | — | OH3948H | OH (hydraulic) | OH3948H |
| 240 mm | — | OH2352H | OH (hydraulic) | OH2352H |
| 240 mm | — | OH3052H | OH (hydraulic) | OH3052H |
| 240 mm | — | OH3052HE | OH (hydraulic) | OH3052HE |
| 240 mm | — | OH3152H | OH (hydraulic) | OH3152H |
| 240 mm | — | OH3152HTL | OH (hydraulic) | OH3152HTL |
| 240 mm | — | OH3952H | OH (hydraulic) | OH3952H |
| 260 mm | — | OH2356H | OH (hydraulic) | OH2356H |
| 260 mm | — | OH3056H | OH (hydraulic) | OH3056H |
| 260 mm | — | OH3156H | OH (hydraulic) | OH3156H |
| 260 mm | — | OH3156HTL | OH (hydraulic) | OH3156HTL |
| 260 mm | — | OH3956H | OH (hydraulic) | OH3956H |
| 280 mm | — | OH3060H | OH (hydraulic) | OH3060H |
| 280 mm | — | OH3160H | OH (hydraulic) | OH3160H |
| 280 mm | — | OH3160HE | OH (hydraulic) | OH3160HE |
| 280 mm | — | OH3260H | OH (hydraulic) | OH3260H |
| 280 mm | — | OH3960H | OH (hydraulic) | OH3960H |
| 300 mm | — | OH3064H | OH (hydraulic) | OH3064H |
| 300 mm | — | OH3164H | OH (hydraulic) | OH3164H |
| 300 mm | — | OH3264H | OH (hydraulic) | OH3264H |
| 300 mm | — | OH3964H | OH (hydraulic) | OH3964H |
| 320 mm | — | OH3068H | OH (hydraulic) | OH3068H |
| 320 mm | — | OH3168H | OH (hydraulic) | OH3168H |
| 320 mm | — | OH3168HE | OH (hydraulic) | OH3168HE |
| 320 mm | — | OH3268H | OH (hydraulic) | OH3268H |
| 320 mm | — | OH3968H | OH (hydraulic) | OH3968H |
| 340 mm | — | OH3072H | OH (hydraulic) | OH3072H |
| 340 mm | — | OH3172H | OH (hydraulic) | OH3172H |
| 340 mm | — | OH3172HE | OH (hydraulic) | OH3172HE |
| 340 mm | — | OH3272H | OH (hydraulic) | OH3272H |
| 340 mm | — | OH3972HE | OH (hydraulic) | OH3972HE |
| 360 mm | — | OH3076H | OH (hydraulic) | OH3076H |
| 360 mm | — | OH3176H | OH (hydraulic) | OH3176H |
| 360 mm | — | OH3176HE | OH (hydraulic) | OH3176HE |
| 360 mm | — | OH3276H | OH (hydraulic) | OH3276H |
| 380 mm | — | OH3080H | OH (hydraulic) | OH3080H |
| 380 mm | — | OH3180H | OH (hydraulic) | OH3180H |
| 380 mm | — | OH3180HE | OH (hydraulic) | OH3180HE |
| 380 mm | — | OH3280H | OH (hydraulic) | OH3280H |
| 400 mm | — | OH3084H | OH (hydraulic) | OH3084H |
| 400 mm | — | OH3184H | OH (hydraulic) | OH3184H |
| 400 mm | — | OH3284H | OH (hydraulic) | OH3284H |
| 400 mm | — | OH3984HE | OH (hydraulic) | OH3984HE |
| 410 mm | — | OH3088H | OH (hydraulic) | OH3088H |
| 410 mm | — | OH3188H | OH (hydraulic) | OH3188H |
| 410 mm | — | OH3288H | OH (hydraulic) | OH3288H |
| 430 mm | — | OH3092H | OH (hydraulic) | OH3092H |
| 430 mm | — | OH3192H | OH (hydraulic) | OH3192H |
| 430 mm | — | OH3292H | OH (hydraulic) | OH3292H |
| 450 mm | — | OH3096H | OH (hydraulic) | OH3096H |
| 450 mm | — | OH3196H | OH (hydraulic) | OH3196H |
| 450 mm | — | OH3296H | OH (hydraulic) | OH3296H |
| 470 mm | — | OH30/500H | OH (hydraulic) | OH30/500H |
| 470 mm | — | OH31/500H | OH (hydraulic) | OH31/500H |
| 500 mm | — | OH30/530H | OH (hydraulic) | OH30/530H |
| 500 mm | — | OH31/530H | OH (hydraulic) | OH31/530H |
| 530 mm | — | OH30/560H | OH (hydraulic) | OH30/560H |
| 530 mm | — | OH31/560H | OH (hydraulic) | OH31/560H |
| 530 mm | — | OH39/560HE | OH (hydraulic) | OH39/560HE |
| 560 mm | — | OH31/600H | OH (hydraulic) | OH31/600H |
| 560 mm | — | OH32/600H | OH (hydraulic) | OH32/600H |
| 600 mm | — | OH30/630H | OH (hydraulic) | OH30/630H |
| 600 mm | — | OH31/630H | OH (hydraulic) | OH31/630H |
| 600 mm | — | OH39/630H | OH (hydraulic) | OH39/630H |
| 630 mm | — | OH30/670H | OH (hydraulic) | OH30/670H |
| 630 mm | — | OH32/670H | OH (hydraulic) | OH32/670H |
| 670 mm | — | OH30/710H | OH (hydraulic) | OH30/710H |
| 670 mm | — | OH31/710H | OH (hydraulic) | OH31/710H |
| 670 mm | — | OH31/710HE | OH (hydraulic) | OH31/710HE |
| 670 mm | — | OH39/710H | OH (hydraulic) | OH39/710H |
| 670 mm | — | OH39/710HE | OH (hydraulic) | OH39/710HE |
| 710 mm | — | OH31/750HE | OH (hydraulic) | OH31/750HE |
| 750 mm | — | OH30/800H | OH (hydraulic) | OH30/800H |
| 800 mm | — | OH30/850H | OH (hydraulic) | OH30/850H |
| 850 mm | — | OH30/900H | OH (hydraulic) | OH30/900H |
| 850 mm | — | OH39/900H | OH (hydraulic) | OH39/900H |
| 1000 mm | — | OH39/1060H | OH (hydraulic) | OH39/1060H |
| Shaft diameter d1 | For bearing bore | Designation | Type | Part number |
|---|---|---|---|---|
| 19.05 mm | — | SNW5X3/4 | inch shaft | SNW5X3/4 |
| 23.81 mm | — | SNW6X15/16 | inch shaft | SNW6X15/16 |
| 25.4 mm | — | SNW6X1. | inch shaft | SNW6X1. |
| 28.58 mm | — | SNW7X1.1/8 | inch shaft | SNW7X1.1/8 |
| 30.16 mm | — | SNW7X1.3/16 | inch shaft | SNW7X1.3/16 |
| 31.75 mm | — | SNW7X1.1/4 | inch shaft | SNW7X1.1/4 |
| 31.75 mm | — | SNW8X1.1/4 | inch shaft | SNW8X1.1/4 |
| 33.34 mm | — | SNW8X1.5/16 | inch shaft | SNW8X1.5/16 |
| 33.34 mm | — | SNW9X1.5/16 | inch shaft | SNW9X1.5/16 |
| 34.92 mm | — | SNW8X1.3/8 | inch shaft | SNW8X1.3/8 |
| 34.92 mm | — | SNW9X1.3/8 | inch shaft | SNW9X1.3/8 |
| 36.51 mm | — | SNW109X1.7/16 | inch shaft | SNW109X1.7/16 |
| 36.51 mm | — | SNW9X1.7/16 | inch shaft | SNW9X1.7/16 |
| 38.1 mm | — | SNW109X1.1/2 | inch shaft | SNW109X1.1/2 |
| 38.1 mm | — | SNW9X1.1/2 | inch shaft | SNW9X1.1/2 |
| 41.28 mm | — | SNW10X1.5/8 | inch shaft | SNW10X1.5/8 |
| 42.86 mm | — | SNW10X1.11/16 | inch shaft | SNW10X1.11/16 |
| 42.86 mm | — | SNW110X1.11/16 | inch shaft | SNW110X1.11/16 |
| 44.45 mm | — | SNW10X1.3/4 | inch shaft | SNW10X1.3/4 |
| 44.45 mm | — | SNW110X1.3/4 | inch shaft | SNW110X1.3/4 |
| 46.04 mm | — | SNW11X1.13/16 | inch shaft | SNW11X1.13/16 |
| 47.63 mm | — | SNW111X1.7/8 | inch shaft | SNW111X1.7/8 |
| 47.63 mm | — | SNW11X1.7/8 | inch shaft | SNW11X1.7/8 |
| 49.21 mm | — | SNW111X1.15/16 | inch shaft | SNW111X1.15/16 |
| 49.21 mm | — | SNW11X1.15/16 | inch shaft | SNW11X1.15/16 |
| 50.8 mm | — | SNW111X2. | inch shaft | SNW111X2. |
| 50.8 mm | — | SNW11X2. | inch shaft | SNW11X2. |
| 50.8 mm | — | SNW13X2. | inch shaft | SNW13X2. |
| 52.39 mm | — | SNW112X2.1/16 | inch shaft | SNW112X2.1/16 |
| 52.39 mm | — | SNW12X2.1/16 | inch shaft | SNW12X2.1/16 |
| 53.98 mm | — | SNW13X2.1/8 | inch shaft | SNW13X2.1/8 |
| 55.56 mm | — | SNW113X2.3/16 | inch shaft | SNW113X2.3/16 |
| 55.56 mm | — | SNW13X2.3/16 | inch shaft | SNW13X2.3/16 |
| 57.15 mm | — | SNW113X2.1/4 | inch shaft | SNW113X2.1/4 |
| 57.15 mm | — | SNW13X2.1/4 | inch shaft | SNW13X2.1/4 |
| 58.74 mm | — | SNW13X2.5/16 | inch shaft | SNW13X2.5/16 |
| 60.33 mm | — | SNW115X2.3/8 | inch shaft | SNW115X2.3/8 |
| 60.33 mm | — | SNW15X2.3/8 | inch shaft | SNW15X2.3/8 |
| 61.91 mm | — | SNW115X2.7/16 | inch shaft | SNW115X2.7/16 |
| 61.91 mm | — | SNW15X2.7/16 | inch shaft | SNW15X2.7/16 |
| 63.5 mm | — | SNW115X2.1/2 | inch shaft | SNW115X2.1/2 |
| 63.5 mm | — | SNW15X2.1/2 | inch shaft | SNW15X2.1/2 |
| 66.68 mm | — | SNW16X2.5/8 | inch shaft | SNW16X2.5/8 |
| 68.26 mm | — | SNW116X2.11/16 | inch shaft | SNW116X2.11/16 |
| 68.26 mm | — | SNW16X2.11/16 | inch shaft | SNW16X2.11/16 |
| 69.85 mm | — | SNW116X2.3/4 | inch shaft | SNW116X2.3/4 |
| 69.85 mm | — | SNW16X2.3/4 | inch shaft | SNW16X2.3/4 |
| 71.44 mm | — | SNW17X2.13/16 | inch shaft | SNW17X2.13/16 |
| 73.03 mm | — | SNW17X2.7/8 | inch shaft | SNW17X2.7/8 |
| 74.61 mm | — | SNW117X2.15/16 | inch shaft | SNW117X2.15/16 |
| 74.61 mm | — | SNW17X2.15/16 | inch shaft | SNW17X2.15/16 |
| 76.2 mm | — | SNW117X3. | inch shaft | SNW117X3. |
| 76.2 mm | — | SNW17X3 | inch shaft | SNW17X3 |
| 77.79 mm | — | SNW18X3.1/16 | inch shaft | SNW18X3.1/16 |
| 79.38 mm | — | SNW18X3.1/8 | inch shaft | SNW18X3.1/8 |
| 80.96 mm | — | SNW118X3.3/16 | inch shaft | SNW118X3.3/16 |
| 80.96 mm | — | SNW18X3.3/16 | inch shaft | SNW18X3.3/16 |
| 82.55 mm | — | SNW118X3.1/4 | inch shaft | SNW118X3.1/4 |
| 82.55 mm | — | SNW18X3.1/4 | inch shaft | SNW18X3.1/4 |
| 84.14 mm | — | SNW19X3.5/16 | inch shaft | SNW19X3.5/16 |
| 85.73 mm | — | SNW120X3.3/8 | inch shaft | SNW120X3.3/8 |
| 85.73 mm | — | SNW20X3.3/8 | inch shaft | SNW20X3.3/8 |
| 87.31 mm | — | SNW120X3.7/16 | inch shaft | SNW120X3.7/16 |
| 87.31 mm | — | SNW20X3.7/16 | inch shaft | SNW20X3.7/16 |
| 88.9 mm | — | SNW120X3.1/2 | inch shaft | SNW120X3.1/2 |
| 88.9 mm | — | SNW20X3.1/2 | inch shaft | SNW20X3.1/2 |
| 93.66 mm | — | SNW21X3.11/16 | inch shaft | SNW21X3.11/16 |
| 93.66 mm | — | SNW22X3.11/16 | inch shaft | SNW22X3.11/16 |
| 95.25 mm | — | SNW122X3.3/4 | inch shaft | SNW122X3.3/4 |
| 96.84 mm | — | SNW122X3.13/16 | inch shaft | SNW122X3.13/16 |
| 98.43 mm | — | SNW22X3.7/8 | inch shaft | SNW22X3.7/8 |
| 100.01 mm | — | SNW122X3.15/16 | inch shaft | SNW122X3.15/16 |
| 100.01 mm | — | SNW122X3.15/16/VZ726 | inch shaft | SNW122X3.15/16/VZ726 |
| 100.01 mm | — | SNW22X3.15/16 | inch shaft | SNW22X3.15/16 |
| 100.01 mm | — | SNW3122X3.15/16 | inch shaft | SNW3122X3.15/16 |
| 101.6 mm | — | SNW122X4. | inch shaft | SNW122X4. |
| 101.6 mm | — | SNW22X4. | inch shaft | SNW22X4. |
| 106.36 mm | — | SNW124X4.3/16 | inch shaft | SNW124X4.3/16 |
| 106.36 mm | — | SNW24X4.3/16 | inch shaft | SNW24X4.3/16 |
| 106.36 mm | — | SNW3024X4.3/16 | inch shaft | SNW3024X4.3/16 |
| 106.36 mm | — | SNW3124X4.3/16 | inch shaft | SNW3124X4.3/16 |
| 107.95 mm | — | SNW24X4.1/4 | inch shaft | SNW24X4.1/4 |
| 107.95 mm | — | SNW3024X4.1/4 | inch shaft | SNW3024X4.1/4 |
| 109.54 mm | — | SNW26X4.5/16 | inch shaft | SNW26X4.5/16 |
| 111.13 mm | — | SNW26X4.3/8 | inch shaft | SNW26X4.3/8 |
| 112.71 mm | — | SNW126X4.7/16 | inch shaft | SNW126X4.7/16 |
| 112.71 mm | — | SNW26X4.7/16 | inch shaft | SNW26X4.7/16 |
| 112.71 mm | — | SNW3026X4.7/16 | inch shaft | SNW3026X4.7/16 |
| 112.71 mm | — | SNW3126X4.7/16 | inch shaft | SNW3126X4.7/16 |
| 114.3 mm | — | SNW126X4.1/2 | inch shaft | SNW126X4.1/2 |
| 114.3 mm | — | SNW26X4.1/2 | inch shaft | SNW26X4.1/2 |
| 114.3 mm | — | SNW3026X4.1/2 | inch shaft | SNW3026X4.1/2 |
| 114.3 mm | — | SNW3126X4.1/2 | inch shaft | SNW3126X4.1/2 |
| 122.24 mm | — | SNW28X4.13/16 | inch shaft | SNW28X4.13/16 |
| 122.24 mm | — | SNW3028X4.13/16 | inch shaft | SNW3028X4.13/16 |
| 123.83 mm | — | SNW128X4.7/8 | inch shaft | SNW128X4.7/8 |
| 123.83 mm | — | SNW28X4.7/8 | inch shaft | SNW28X4.7/8 |
| 125.41 mm | — | SNW128X4.15/16 | inch shaft | SNW128X4.15/16 |
| 125.41 mm | — | SNW28X4.15/16 | inch shaft | SNW28X4.15/16 |
| 125.41 mm | — | SNW3028X4.15/16 | inch shaft | SNW3028X4.15/16 |
| 125.41 mm | — | SNW3128X4.15/16 | inch shaft | SNW3128X4.15/16 |
| 127 mm | — | SNW128X5. | inch shaft | SNW128X5. |
| 127 mm | — | SNW28X5. | inch shaft | SNW28X5. |
| 127 mm | — | SNW3028X5. | inch shaft | SNW3028X5. |
| 127 mm | — | SNW3128X5. | inch shaft | SNW3128X5. |
| 130.18 mm | — | SNW130X5.1/8 | inch shaft | SNW130X5.1/8 |
| 131.76 mm | — | SNW130X5.3/16 | inch shaft | SNW130X5.3/16 |
| 131.76 mm | — | SNW3030X5.3/16 | inch shaft | SNW3030X5.3/16 |
| 131.76 mm | — | SNW30X5.3/16 | inch shaft | SNW30X5.3/16 |
| 131.76 mm | — | SNW3130X5.3/16 | inch shaft | SNW3130X5.3/16 |
| 133.35 mm | — | SNW30X5.1/4 | inch shaft | SNW30X5.1/4 |
| 136.53 mm | — | SNW3032X5.3/8 | inch shaft | SNW3032X5.3/8 |
| 136.53 mm | — | SNW32X5.3/8 | inch shaft | SNW32X5.3/8 |
| 138.11 mm | — | SNW132X5.7/16 | inch shaft | SNW132X5.7/16 |
| 138.11 mm | — | SNW3032X5.7/16 | inch shaft | SNW3032X5.7/16 |
| 138.11 mm | — | SNW3132X5.7/16 | inch shaft | SNW3132X5.7/16 |
| 138.11 mm | — | SNW32X5.7/16 | inch shaft | SNW32X5.7/16 |
| 139.7 mm | — | SNW3032X5.1/2 | inch shaft | SNW3032X5.1/2 |
| 139.7 mm | — | SNW3132X5.1/2 | inch shaft | SNW3132X5.1/2 |
| 139.7 mm | — | SNW32X5.1/2 | inch shaft | SNW32X5.1/2 |
| 146.05 mm | — | SNW32X5.3/4 | inch shaft | SNW32X5.3/4 |
| 147.64 mm | — | SNW134X5.13/16 | inch shaft | SNW134X5.13/16 |
| 147.64 mm | — | SNW34X5.13/16 | inch shaft | SNW34X5.13/16 |
| 149.23 mm | — | SNW3034X5.7/8 | inch shaft | SNW3034X5.7/8 |
| 149.23 mm | — | SNW34X5.7/8 | inch shaft | SNW34X5.7/8 |
| 150.81 mm | — | SNW134X5.15/16 | inch shaft | SNW134X5.15/16 |
| 150.81 mm | — | SNW3034X5.15/16 | inch shaft | SNW3034X5.15/16 |
| 150.81 mm | — | SNW3134X5.15/16 | inch shaft | SNW3134X5.15/16 |
| 150.81 mm | — | SNW34X5.15/16 | inch shaft | SNW34X5.15/16 |
| 152.4 mm | — | SNW134X6. | inch shaft | SNW134X6. |
| 152.4 mm | — | SNW3034X6. | inch shaft | SNW3034X6. |
| 152.4 mm | — | SNW3134X6. | inch shaft | SNW3134X6. |
| 152.4 mm | — | SNW34X6. | inch shaft | SNW34X6. |
| 160.34 mm | — | SNW36X6.5/16 | inch shaft | SNW36X6.5/16 |
| 163.51 mm | — | SNW136X6.7/16 | inch shaft | SNW136X6.7/16 |
| 163.51 mm | — | SNW3036X6.7/16 | inch shaft | SNW3036X6.7/16 |
| 163.51 mm | — | SNW3136X6.7/16 | inch shaft | SNW3136X6.7/16 |
| 163.51 mm | — | SNW36X6.7/16 | inch shaft | SNW36X6.7/16 |
| 165.1 mm | — | SNW3036X6.1/2 | inch shaft | SNW3036X6.1/2 |
| 165.1 mm | — | SNW3136X6.1/2 | inch shaft | SNW3136X6.1/2 |
| 165.1 mm | — | SNW36X6.1/2 | inch shaft | SNW36X6.1/2 |
| 174.63 mm | — | SNW3138X6.7/8 | inch shaft | SNW3138X6.7/8 |
| 174.63 mm | — | SNW38X6.7/8 | inch shaft | SNW38X6.7/8 |
| 176.21 mm | — | SNW138X6.15/16 | inch shaft | SNW138X6.15/16 |
| 176.21 mm | — | SNW3038X6.15/16 | inch shaft | SNW3038X6.15/16 |
| 176.21 mm | — | SNW3138X6.15/16 | inch shaft | SNW3138X6.15/16 |
| 176.21 mm | — | SNW38X6.15/16 | inch shaft | SNW38X6.15/16 |
| 177.8 mm | — | SNW138X7 | inch shaft | SNW138X7 |
| 177.8 mm | — | SNW3038X7. | inch shaft | SNW3038X7. |
| 177.8 mm | — | SNW3040X7. | inch shaft | SNW3040X7. |
| 177.8 mm | — | SNW38X7. | inch shaft | SNW38X7. |
| 180.98 mm | — | SNW3040X7.1/8 | inch shaft | SNW3040X7.1/8 |
| 182.56 mm | — | SNW140X7.3/16 | inch shaft | SNW140X7.3/16 |
| 182.56 mm | — | SNW3040X7.3/16 | inch shaft | SNW3040X7.3/16 |
| 182.56 mm | — | SNW3140X7.3/16 | inch shaft | SNW3140X7.3/16 |
| 182.56 mm | — | SNW40X7.3/16 | inch shaft | SNW40X7.3/16 |
| 184.15 mm | — | SNW40X7.1/4 | inch shaft | SNW40X7.1/4 |
| 190.5 mm | — | SNW44X7.1/2 | inch shaft | SNW44X7.1/2 |
| 193.68 mm | — | SNW3044X7.5/8 | inch shaft | SNW3044X7.5/8 |
| 196.85 mm | — | SNW3044X7.3/4 | inch shaft | SNW3044X7.3/4 |
| 198.44 mm | — | SNW44X7.13/16 | inch shaft | SNW44X7.13/16 |
| 200.03 mm | — | SNW3044X7.7/8 | inch shaft | SNW3044X7.7/8 |
| 200.03 mm | — | SNW44X7.7/8 | inch shaft | SNW44X7.7/8 |
| 201.61 mm | — | SNW144X7.15/16 | inch shaft | SNW144X7.15/16 |
| 201.61 mm | — | SNW3044X7.15/16 | inch shaft | SNW3044X7.15/16 |
| 201.61 mm | — | SNW3144X7.15/16 | inch shaft | SNW3144X7.15/16 |
| 201.61 mm | — | SNW44X7.15/16 | inch shaft | SNW44X7.15/16 |
| 203.2 mm | — | SNW144X8 | inch shaft | SNW144X8 |
| 203.2 mm | — | SNW3044X8. | inch shaft | SNW3044X8. |
| 203.2 mm | — | SNW3144X8. | inch shaft | SNW3144X8. |
| 203.2 mm | — | SNW44X8. | inch shaft | SNW44X8. |
| 214.31 mm | — | OSNP3048X8.7/16 | inch shaft | OSNP3048X8.7/16 |
| 214.31 mm | — | SNP3048X8.7/16 | inch shaft | SNP3048X8.7/16 |
| 215.9 mm | — | OSNP3048X8.1/2 | inch shaft | OSNP3048X8.1/2 |
| 215.9 mm | — | SNP148X8.1/2 | inch shaft | SNP148X8.1/2 |
| 215.9 mm | — | SNP3048X8.1/2 | inch shaft | SNP3048X8.1/2 |
| 220.66 mm | — | SNP3048X8.11/16 | inch shaft | SNP3048X8.11/16 |
| 222.63 mm | — | SNP3048X8.765 | inch shaft | SNP3048X8.765 |
| 227.01 mm | — | OSNP148X8.15/16 | inch shaft | OSNP148X8.15/16 |
| 227.01 mm | — | OSNP3048X8.15/16 | inch shaft | OSNP3048X8.15/16 |
| 227.01 mm | — | SNP148X8.15/16 | inch shaft | SNP148X8.15/16 |
| 227.01 mm | — | SNP3048X8.15/16 | inch shaft | SNP3048X8.15/16 |
| 227.01 mm | — | SNP3148X8.15/16 | inch shaft | SNP3148X8.15/16 |
| 228.6 mm | — | OSNP3048X9. | inch shaft | OSNP3048X9. |
| 228.6 mm | — | OSNP3148X9 | inch shaft | OSNP3148X9 |
| 228.6 mm | — | SNP148X9 | inch shaft | SNP148X9 |
| 228.6 mm | — | SNP152X9 | inch shaft | SNP152X9 |
| 228.6 mm | — | SNP3048X9 | inch shaft | SNP3048X9 |
| 228.6 mm | — | SNP3148X9 | inch shaft | SNP3148X9 |
| 228.6 mm | — | SNP3152X9 | inch shaft | SNP3152X9 |
| 239.71 mm | — | OSNP152X9.7/16 | inch shaft | OSNP152X9.7/16 |
| 239.71 mm | — | OSNP3052X9.7/16 | inch shaft | OSNP3052X9.7/16 |
| 239.71 mm | — | OSNP3152X9.7/16 | inch shaft | OSNP3152X9.7/16 |
| 239.71 mm | — | SNP152X9.7/16 | inch shaft | SNP152X9.7/16 |
| 239.71 mm | — | SNP3052X9.7/16 | inch shaft | SNP3052X9.7/16 |
| 239.71 mm | — | SNP3152X9.7/16 | inch shaft | SNP3152X9.7/16 |
| 241.3 mm | — | OSNP3052X9.1/2 | inch shaft | OSNP3052X9.1/2 |
| 241.3 mm | — | OSNP3152X9.1/2 | inch shaft | OSNP3152X9.1/2 |
| 241.3 mm | — | SNP3052X9.1/2 | inch shaft | SNP3052X9.1/2 |
| 241.3 mm | — | SNP3152X9.1/2 | inch shaft | SNP3152X9.1/2 |
| 252.41 mm | — | OSNP3056X9.15/16 | inch shaft | OSNP3056X9.15/16 |
| 252.41 mm | — | SNP3056X9.15/16 | inch shaft | SNP3056X9.15/16 |
| 254 mm | — | OSNP3056X10. | inch shaft | OSNP3056X10. |
| 254 mm | — | OSNP3256X10H | inch shaft | OSNP3256X10H |
| 254 mm | — | SNP3056X10 | inch shaft | SNP3056X10 |
| 254 mm | — | SNP3156X10 | inch shaft | SNP3156X10 |
| 254 mm | — | SNP3256X10 | inch shaft | SNP3256X10 |
| 265.11 mm | — | OSNP3056X10.7/16 | inch shaft | OSNP3056X10.7/16 |
| 265.11 mm | — | OSNP3156X10.7/16 | inch shaft | OSNP3156X10.7/16 |
| 265.11 mm | — | SNP3056X10.7/16 | inch shaft | SNP3056X10.7/16 |
| 265.11 mm | — | SNP3156X10.7/16 | inch shaft | SNP3156X10.7/16 |
| 265.11 mm | — | SNP3256X10.7/16 | inch shaft | SNP3256X10.7/16 |
| 266.7 mm | — | OSNP3056X10.1/2 | inch shaft | OSNP3056X10.1/2 |
| 266.7 mm | — | OSNP3156X10.1/2 | inch shaft | OSNP3156X10.1/2 |
| 266.7 mm | — | SNP3056X10.1/2 | inch shaft | SNP3056X10.1/2 |
| 266.7 mm | — | SNP3156X10.1/2 | inch shaft | SNP3156X10.1/2 |
| 277.81 mm | — | OSNP3060X10.15/16 | inch shaft | OSNP3060X10.15/16 |
| 277.81 mm | — | OSNP3160X10.15/16 | inch shaft | OSNP3160X10.15/16 |
| 277.81 mm | — | OSNP3160X11. | inch shaft | OSNP3160X11. |
| 277.81 mm | — | SNP3060X10.15/16 | inch shaft | SNP3060X10.15/16 |
| 277.81 mm | — | SNP3160X10.15/16 | inch shaft | SNP3160X10.15/16 |
| 277.81 mm | — | SNP3160X11 | inch shaft | SNP3160X11 |
| 277.81 mm | — | SNP3260X10.15/16 | inch shaft | SNP3260X10.15/16 |
| 279.4 mm | — | OSNP3060X11. | inch shaft | OSNP3060X11. |
| 279.4 mm | — | SNP3060X11 | inch shaft | SNP3060X11 |
| 290.51 mm | — | OSNP3064X11.7/16 | inch shaft | OSNP3064X11.7/16 |
| 290.51 mm | — | OSNP3064X11.7/16H | inch shaft | OSNP3064X11.7/16H |
| 290.51 mm | — | SNP3064X11.7/16 | inch shaft | SNP3064X11.7/16 |
| 292.1 mm | — | OSNP3064X11.1/2 | inch shaft | OSNP3064X11.1/2 |
| 292.1 mm | — | OSNP3064X11.1/2H/VU100 | inch shaft | OSNP3064X11.1/2H/VU100 |
| 292.1 mm | — | OSNP3064X11.1/2HB | inch shaft | OSNP3064X11.1/2HB |
| 292.1 mm | — | SNP3064X11.1/2 | inch shaft | SNP3064X11.1/2 |
| 292.1 mm | — | SNP3264X11.1/2 | inch shaft | SNP3264X11.1/2 |
| 303.21 mm | — | OSNP3064X11.15/16 | inch shaft | OSNP3064X11.15/16 |
| 303.21 mm | — | SNP3064X11.15/16 | inch shaft | SNP3064X11.15/16 |
| 303.21 mm | — | SNP3164X11.15/16 | inch shaft | SNP3164X11.15/16 |
| 304.8 mm | — | OSNP3064X12. | inch shaft | OSNP3064X12. |
| 304.8 mm | — | OSNP3164X12. | inch shaft | OSNP3164X12. |
| 304.8 mm | — | OSNP3264X12. | inch shaft | OSNP3264X12. |
| 304.8 mm | — | SNP3064X12 | inch shaft | SNP3064X12 |
| 304.8 mm | — | SNP3164X12 | inch shaft | SNP3164X12 |
| 304.8 mm | — | SNP3264X12 | inch shaft | SNP3264X12 |
| 311.15 mm | — | OSNP3168X12.1/4H | inch shaft | OSNP3168X12.1/4H |
| 315.91 mm | — | OSNP3068X12.7/16 | inch shaft | OSNP3068X12.7/16 |
| 315.91 mm | — | SNP3068X12.7/16 | inch shaft | SNP3068X12.7/16 |
| 315.91 mm | — | SNP3168X12.7/16 | inch shaft | SNP3168X12.7/16 |
| 315.91 mm | — | SNP3268X12.7/16 | inch shaft | SNP3268X12.7/16 |
| 317.5 mm | — | OSNP3068X12.1/2 | inch shaft | OSNP3068X12.1/2 |
| 317.5 mm | — | OSNP3068X12.1/2/VU100 | inch shaft | OSNP3068X12.1/2/VU100 |
| 317.5 mm | — | OSNP3168X12.1/2 | inch shaft | OSNP3168X12.1/2 |
| 317.5 mm | — | OSNP3268X12.1/2 | inch shaft | OSNP3268X12.1/2 |
| 317.5 mm | — | SNP3068X12.1/2 | inch shaft | SNP3068X12.1/2 |
| 317.5 mm | — | SNP3168X12.1/2 | inch shaft | SNP3168X12.1/2 |
| 317.5 mm | — | SNP3268X12.1/2 | inch shaft | SNP3268X12.1/2 |
| 330.2 mm | — | OSNP3172X13. | inch shaft | OSNP3172X13. |
| 330.2 mm | — | SNP3072X13. | inch shaft | SNP3072X13. |
| 341.31 mm | — | OSNP3072X13.7/16 | inch shaft | OSNP3072X13.7/16 |
| 341.31 mm | — | SNP3072X13.7/16 | inch shaft | SNP3072X13.7/16 |
| 341.31 mm | — | SNP3172X13.7/16 | inch shaft | SNP3172X13.7/16 |
| 341.31 mm | — | SNP3272X13.7/16 | inch shaft | SNP3272X13.7/16 |
| 342.9 mm | — | SNP3072X13.1/2 | inch shaft | SNP3072X13.1/2 |
| 342.9 mm | — | SNP3172X13 | inch shaft | SNP3172X13 |
| 342.9 mm | — | SNP3172X13.1/2 | inch shaft | SNP3172X13.1/2 |
| 354.01 mm | — | OSNP3076X13.15/16 | inch shaft | OSNP3076X13.15/16 |
| 354.01 mm | — | SNP3176X13.15/16 | inch shaft | SNP3176X13.15/16 |
| 355.6 mm | — | OSNP3076X14. | inch shaft | OSNP3076X14. |
| 355.6 mm | — | OSNP3176X14. | inch shaft | OSNP3176X14. |
| 355.6 mm | — | OSNP3276X14. | inch shaft | OSNP3276X14. |
| 355.6 mm | — | SNP3076X14 | inch shaft | SNP3076X14 |
| 355.6 mm | — | SNP3276X14 | inch shaft | SNP3276X14 |
| 363.54 mm | — | SNP3080X14.15/16 | inch shaft | SNP3080X14.15/16 |
| 379.41 mm | — | SNP3180X14.15/16 | inch shaft | SNP3180X14.15/16 |
| 381 mm | — | OSNP3080X15 | inch shaft | OSNP3080X15 |
| 381 mm | — | OSNP3180X15 | inch shaft | OSNP3180X15 |
| 381 mm | — | OSNP3280X15 | inch shaft | OSNP3280X15 |
| 381 mm | — | SNP3080X15 | inch shaft | SNP3080X15 |
| 381 mm | — | SNP3180X15 | inch shaft | SNP3180X15 |
| 381 mm | — | SNP3280X15 | inch shaft | SNP3280X15 |
| 400.05 mm | — | OSNP3084X15.3/4 | inch shaft | OSNP3084X15.3/4 |
| 400.05 mm | — | OSNP3184X15.3/4 | inch shaft | OSNP3184X15.3/4 |
| 400.05 mm | — | SNP3084X15.3/4 | inch shaft | SNP3084X15.3/4 |
| 400.05 mm | — | SNP3184X15.3/4 | inch shaft | SNP3184X15.3/4 |
| 400.05 mm | — | SNP3284X15.3/4 | inch shaft | SNP3284X15.3/4 |
| 406.4 mm | — | SNP3088X16 | inch shaft | SNP3088X16 |
| 419.1 mm | — | OSNP3088X16.1/2 | inch shaft | OSNP3088X16.1/2 |
| 419.1 mm | — | OSNP3188X16.1/2 | inch shaft | OSNP3188X16.1/2 |
| 419.1 mm | — | SNP3088X16.1/2 | inch shaft | SNP3088X16.1/2 |
| 419.1 mm | — | SNP3188X16.1/2 | inch shaft | SNP3188X16.1/2 |
| 457.2 mm | — | OSNP3196X18. | inch shaft | OSNP3196X18. |
| 457.2 mm | — | SNP3096X18 | inch shaft | SNP3096X18 |
| 469.9 mm | — | OSNP31/500X18.1/2 | inch shaft | OSNP31/500X18.1/2 |
| 469.9 mm | — | OSNP32/500X18.1/2 | inch shaft | OSNP32/500X18.1/2 |
| 533.4 mm | — | OSNP31/600X21H | inch shaft | OSNP31/600X21H |
| Shaft diameter d1 | For bearing bore | Designation | Type | Part number |
|---|---|---|---|---|
| 35 mm | 40 mm | AH2308 | withdrawal | AH2308 |
| 35 mm | 40 mm | AH308 | withdrawal | AH308 |
| 40 mm | 45 mm | AH2309 | withdrawal | AH2309 |
| 40 mm | 45 mm | AH309 | withdrawal | AH309 |
| 45 mm | — | SK110 | withdrawal | SK110 |
| 45 mm | 50 mm | AHX2310 | withdrawal | AHX2310 |
| 45 mm | 50 mm | AHX310 | withdrawal | AHX310 |
| 50 mm | — | SK111 | withdrawal | SK111 |
| 50 mm | 55 mm | AHX2311 | withdrawal | AHX2311 |
| 50 mm | 55 mm | AHX311 | withdrawal | AHX311 |
| 55 mm | — | SK112 | withdrawal | SK112 |
| 55 mm | 60 mm | AHX2312 | withdrawal | AHX2312 |
| 55 mm | 60 mm | AHX312 | withdrawal | AHX312 |
| 60 mm | — | AH2313G | withdrawal | AH2313G |
| 60 mm | — | AH313G | withdrawal | AH313G |
| 60 mm | — | ASK114 | withdrawal | ASK114 |
| 65 mm | — | AH314G | withdrawal | AH314G |
| 65 mm | — | AHX2314G | withdrawal | AHX2314G |
| 65 mm | — | ASK115 | withdrawal | ASK115 |
| 70 mm | — | AH315G | withdrawal | AH315G |
| 70 mm | — | AHX2315G | withdrawal | AHX2315G |
| 70 mm | — | AHX2315G/V21 | withdrawal | AHX2315G/V21 |
| 70 mm | — | ASK116 | withdrawal | ASK116 |
| 75 mm | — | ASK117 | withdrawal | ASK117 |
| 75 mm | — | ASK17 | withdrawal | ASK17 |
| 75 mm | 80 mm | AH316 | withdrawal | AH316 |
| 75 mm | 80 mm | AHX2316 | withdrawal | AHX2316 |
| 80 mm | — | ASK118 | withdrawal | ASK118 |
| 80 mm | — | ASK18 | withdrawal | ASK18 |
| 80 mm | 85 mm | AHX2317 | withdrawal | AHX2317 |
| 80 mm | 85 mm | AHX317 | withdrawal | AHX317 |
| 85 mm | — | ASK119 | withdrawal | ASK119 |
| 85 mm | — | ASK19 | withdrawal | ASK19 |
| 85 mm | 90 mm | AHX2318 | withdrawal | AHX2318 |
| 85 mm | 90 mm | AHX318 | withdrawal | AHX318 |
| 85 mm | 90 mm | AHX3218 | withdrawal | AHX3218 |
| 90 mm | — | ASK120 | withdrawal | ASK120 |
| 90 mm | — | ASK20 | withdrawal | ASK20 |
| 90 mm | 95 mm | AHX2319 | withdrawal | AHX2319 |
| 90 mm | 95 mm | AHX319 | withdrawal | AHX319 |
| 95 mm | 100 mm | AHX2320 | withdrawal | AHX2320 |
| 95 mm | 100 mm | AHX3120 | withdrawal | AHX3120 |
| 95 mm | 100 mm | AHX320 | withdrawal | AHX320 |
| 95 mm | 100 mm | AHX3220 | withdrawal | AHX3220 |
| 100 mm | — | ASK122 | withdrawal | ASK122 |
| 100 mm | — | ASK22 | withdrawal | ASK22 |
| 100 mm | 110 mm | AHX3122/100 | withdrawal | AHX3122/100 |
| 100 mm | 110 mm | AHX3222/100 | withdrawal | AHX3222/100 |
| 105 mm | — | AH24122 | withdrawal | AH24122 |
| 105 mm | — | AHX2322G | withdrawal | AHX2322G |
| 105 mm | — | AHX3222G | withdrawal | AHX3222G |
| 105 mm | — | ASK124 | withdrawal | ASK124 |
| 105 mm | 110 mm | AHX3122 | withdrawal | AHX3122 |
| 105 mm | 110 mm | AHX322 | withdrawal | AHX322 |
| 110 mm | — | ASK24 | withdrawal | ASK24 |
| 110 mm | 120 mm | AHX3124/110 | withdrawal | AHX3124/110 |
| 115 mm | — | AH24024 | withdrawal | AH24024 |
| 115 mm | — | AH24124 | withdrawal | AH24124 |
| 115 mm | — | AHX2324G | withdrawal | AHX2324G |
| 115 mm | — | AHX3224G | withdrawal | AHX3224G |
| 115 mm | — | ASK126 | withdrawal | ASK126 |
| 115 mm | — | ASK26 | withdrawal | ASK26 |
| 115 mm | 120 mm | AHX3024 | withdrawal | AHX3024 |
| 115 mm | 120 mm | AHX3124 | withdrawal | AHX3124 |
| 120 mm | 130 mm | AHX2326/120 | withdrawal | AHX2326/120 |
| 120 mm | 130 mm | AHX3126/120 | withdrawal | AHX3126/120 |
| 125 mm | — | AH24026 | withdrawal | AH24026 |
| 125 mm | — | AH24126 | withdrawal | AH24126 |
| 125 mm | — | AHX2326G | withdrawal | AHX2326G |
| 125 mm | — | AHX3226G | withdrawal | AHX3226G |
| 125 mm | — | SK128 | withdrawal | SK128 |
| 125 mm | — | SK28 | withdrawal | SK28 |
| 125 mm | 130 mm | AHX3026 | withdrawal | AHX3026 |
| 125 mm | 130 mm | AHX3126 | withdrawal | AHX3126 |
| 127.08 mm | — | SK130X5.003 | withdrawal | SK130X5.003 |
| 130 mm | 140 mm | AHX2328/130 | withdrawal | AHX2328/130 |
| 130 mm | 140 mm | AHX3228/130 | withdrawal | AHX3228/130 |
| 135 mm | — | AH24028 | withdrawal | AH24028 |
| 135 mm | — | AH24128 | withdrawal | AH24128 |
| 135 mm | — | AHX2328G | withdrawal | AHX2328G |
| 135 mm | — | AHX3228G | withdrawal | AHX3228G |
| 135 mm | — | SK130 | withdrawal | SK130 |
| 135 mm | — | SK30 | withdrawal | SK30 |
| 135 mm | 140 mm | AHX3028 | withdrawal | AHX3028 |
| 135 mm | 140 mm | AHX3128 | withdrawal | AHX3128 |
| 140 mm | — | SK132 | withdrawal | SK132 |
| 140 mm | — | SK32 | withdrawal | SK32 |
| 140 mm | 150 mm | AHX3030/140 | withdrawal | AHX3030/140 |
| 140 mm | 150 mm | AHX3130/140 | withdrawal | AHX3130/140 |
| 145 mm | — | AH24030 | withdrawal | AH24030 |
| 145 mm | — | AH24130 | withdrawal | AH24130 |
| 145 mm | — | AHX2330G | withdrawal | AHX2330G |
| 145 mm | — | AHX3130G | withdrawal | AHX3130G |
| 145 mm | — | AHX3230G | withdrawal | AHX3230G |
| 145 mm | 150 mm | AHX3030 | withdrawal | AHX3030 |
| 150 mm | — | AH2332G | withdrawal | AH2332G |
| 150 mm | — | AH24032 | withdrawal | AH24032 |
| 150 mm | — | AH24032/A51 | withdrawal | AH24032/A51 |
| 150 mm | — | AH24132 | withdrawal | AH24132 |
| 150 mm | — | AH3132G | withdrawal | AH3132G |
| 150 mm | — | AH3232G | withdrawal | AH3232G |
| 150 mm | — | SK134 | withdrawal | SK134 |
| 150 mm | — | SK34 | withdrawal | SK34 |
| 150 mm | 160 mm | AH3032 | withdrawal | AH3032 |
| 152.4 mm | — | SK34X6 | withdrawal | SK34X6 |
| 160 mm | — | AH2334G | withdrawal | AH2334G |
| 160 mm | — | AH24034 | withdrawal | AH24034 |
| 160 mm | — | AH24134 | withdrawal | AH24134 |
| 160 mm | — | AH3134G | withdrawal | AH3134G |
| 160 mm | — | AH3234G | withdrawal | AH3234G |
| 160 mm | — | SK136 | withdrawal | SK136 |
| 160 mm | — | SK36 | withdrawal | SK36 |
| 160 mm | 170 mm | AH3034 | withdrawal | AH3034 |
| 170 mm | — | AH2236G | withdrawal | AH2236G |
| 170 mm | — | AH2336G | withdrawal | AH2336G |
| 170 mm | — | AH24036 | withdrawal | AH24036 |
| 170 mm | — | AH24136 | withdrawal | AH24136 |
| 170 mm | — | AH3136G | withdrawal | AH3136G |
| 170 mm | — | AH3236G | withdrawal | AH3236G |
| 170 mm | — | SK138 | withdrawal | SK138 |
| 170 mm | — | SK38 | withdrawal | SK38 |
| — | 170 mm | AH 3034 | withdrawal | AH 3034 |
| 170 mm | 180 mm | AH3036 | withdrawal | AH3036 |
| 177.8 mm | 190 mm | AH3038/177.8G | withdrawal | AH3038/177.8G |
| 180 mm | — | AH2238G | withdrawal | AH2238G |
| 180 mm | — | AH2338G | withdrawal | AH2338G |
| 180 mm | — | AH24038 | withdrawal | AH24038 |
| 180 mm | — | AH24138 | withdrawal | AH24138 |
| 180 mm | — | AH3038G | withdrawal | AH3038G |
| 180 mm | — | AH3138G | withdrawal | AH3138G |
| 180 mm | — | AH3238G | withdrawal | AH3238G |
| 180 mm | — | SK140 | withdrawal | SK140 |
| 180 mm | — | SK40 | withdrawal | SK40 |
| 190 mm | — | AH24040 | withdrawal | AH24040 |
| 190 mm | — | AH24140 | withdrawal | AH24140 |
| 190 mm | — | AH3040G | withdrawal | AH3040G |
| 190 mm | 200 mm | AH2240 | withdrawal | AH2240 |
| 190 mm | 200 mm | AH2340 | withdrawal | AH2340 |
| 190 mm | 200 mm | AH3140 | withdrawal | AH3140 |
| 190 mm | 200 mm | AH3240 | withdrawal | AH3240 |
| 190 mm | 200 mm | AOH2340 | hydraulic withdrawal | AOH2340 |
| 190 mm | 200 mm | AOH3040 | hydraulic withdrawal | AOH3040 |
| 200 mm | — | AOH24044 | hydraulic withdrawal | AOH24044 |
| 200 mm | — | AOH24144 | hydraulic withdrawal | AOH24144 |
| 200 mm | — | AOH3044G | hydraulic withdrawal | AOH3044G |
| 200 mm | — | SK144 | withdrawal | SK144 |
| 200 mm | — | SK44 | withdrawal | SK44 |
| 200 mm | 220 mm | AOH2244 | hydraulic withdrawal | AOH2244 |
| 200 mm | 220 mm | AOH2344 | hydraulic withdrawal | AOH2344 |
| 200 mm | 220 mm | AOH3144 | hydraulic withdrawal | AOH3144 |
| 220 mm | — | AOH24048 | hydraulic withdrawal | AOH24048 |
| 220 mm | — | AOH24148 | hydraulic withdrawal | AOH24148 |
| 220 mm | — | SK148 | withdrawal | SK148 |
| 220 mm | 240 mm | AH3048 | withdrawal | AH3048 |
| 220 mm | 240 mm | AOH2248 | hydraulic withdrawal | AOH2248 |
| 220 mm | 240 mm | AOH2348 | hydraulic withdrawal | AOH2348 |
| 220 mm | 240 mm | AOH3048 | hydraulic withdrawal | AOH3048 |
| 220 mm | 240 mm | AOH3148 | hydraulic withdrawal | AOH3148 |
| 231.78 mm | — | I-79804X9.125 | withdrawal | I-79804X9.125 |
| 232.41 mm | — | I-79804X9.150 | withdrawal | I-79804X9.150 |
| 232.56 mm | — | I-79804X9.156 | withdrawal | I-79804X9.156 |
| 233.05 mm | — | I-79804X9.175 | withdrawal | I-79804X9.175 |
| 233.35 mm | — | I-79804X9.187 | withdrawal | I-79804X9.187 |
| 233.93 mm | — | I-79804X9.210 | withdrawal | I-79804X9.210 |
| 234.14 mm | — | I-79804X9.218 | withdrawal | I-79804X9.218 |
| 234.44 mm | — | I-79804X9.230 | withdrawal | I-79804X9.230 |
| 234.7 mm | — | I-79804X9.240 | withdrawal | I-79804X9.240 |
| 234.95 mm | — | I-79804 | withdrawal | I-79804 |
| 240 mm | — | AOH2352G | hydraulic withdrawal | AOH2352G |
| 240 mm | — | AOH24052G | hydraulic withdrawal | AOH24052G |
| 240 mm | — | AOH24152 | hydraulic withdrawal | AOH24152 |
| 240 mm | — | AOH3152G | hydraulic withdrawal | AOH3152G |
| 240 mm | 260 mm | AOH3052 | hydraulic withdrawal | AOH3052 |
| 260 mm | — | AOH2256G | hydraulic withdrawal | AOH2256G |
| 260 mm | — | AOH2356G | hydraulic withdrawal | AOH2356G |
| 260 mm | — | AOH24056G | hydraulic withdrawal | AOH24056G |
| 260 mm | — | AOH24156 | hydraulic withdrawal | AOH24156 |
| 260 mm | — | AOH3156G | hydraulic withdrawal | AOH3156G |
| 260 mm | 280 mm | AOH3056 | hydraulic withdrawal | AOH3056 |
| 280 mm | — | AOH24060G | hydraulic withdrawal | AOH24060G |
| 280 mm | — | AOH24160 | hydraulic withdrawal | AOH24160 |
| 280 mm | — | AOH3160G | hydraulic withdrawal | AOH3160G |
| 280 mm | — | AOH3260G | hydraulic withdrawal | AOH3260G |
| 280 mm | 300 mm | AOH3060 | hydraulic withdrawal | AOH3060 |
| 300 mm | — | AOH2264G | hydraulic withdrawal | AOH2264G |
| 300 mm | — | AOH24064G | hydraulic withdrawal | AOH24064G |
| 300 mm | — | AOH24164 | hydraulic withdrawal | AOH24164 |
| 300 mm | — | AOH3064G | hydraulic withdrawal | AOH3064G |
| 300 mm | — | AOH3164G | hydraulic withdrawal | AOH3164G |
| 300 mm | — | AOH3264G | hydraulic withdrawal | AOH3264G |
| 320 mm | — | AOH24068 | hydraulic withdrawal | AOH24068 |
| 320 mm | — | AOH24168 | hydraulic withdrawal | AOH24168 |
| 320 mm | — | AOH3068G | hydraulic withdrawal | AOH3068G |
| 320 mm | — | AOH3168G | hydraulic withdrawal | AOH3168G |
| 320 mm | — | AOH3268G | hydraulic withdrawal | AOH3268G |
| 340 mm | — | AOH24072 | hydraulic withdrawal | AOH24072 |
| 340 mm | — | AOH24172 | hydraulic withdrawal | AOH24172 |
| 340 mm | — | AOH3072G | hydraulic withdrawal | AOH3072G |
| 340 mm | — | AOH3172G | hydraulic withdrawal | AOH3172G |
| 340 mm | — | AOH3272G | hydraulic withdrawal | AOH3272G |
| 360 mm | — | AOH24076 | hydraulic withdrawal | AOH24076 |
| 360 mm | — | AOH24176 | hydraulic withdrawal | AOH24176 |
| 360 mm | — | AOH3076G | hydraulic withdrawal | AOH3076G |
| 360 mm | — | AOH3176G | hydraulic withdrawal | AOH3176G |
| 360 mm | — | AOH3276G | hydraulic withdrawal | AOH3276G |
| 380 mm | — | AOH24080 | hydraulic withdrawal | AOH24080 |
| 380 mm | — | AOH24180 | hydraulic withdrawal | AOH24180 |
| 380 mm | — | AOH3080G | hydraulic withdrawal | AOH3080G |
| 380 mm | — | AOH3180G | hydraulic withdrawal | AOH3180G |
| 380 mm | — | AOH3280G | hydraulic withdrawal | AOH3280G |
| 400 mm | — | AOH24184 | hydraulic withdrawal | AOH24184 |
| 400 mm | — | AOH3084G | hydraulic withdrawal | AOH3084G |
| 400 mm | — | AOH3184G | hydraulic withdrawal | AOH3184G |
| 400 mm | — | AOH3284G | hydraulic withdrawal | AOH3284G |
| 420 mm | — | AOH24088 | hydraulic withdrawal | AOH24088 |
| 420 mm | — | AOH24188 | hydraulic withdrawal | AOH24188 |
| 420 mm | — | AOHX3088G | hydraulic withdrawal | AOHX3088G |
| 420 mm | — | AOHX3188G | hydraulic withdrawal | AOHX3188G |
| 440 mm | — | AOH24192 | hydraulic withdrawal | AOH24192 |
| 440 mm | — | AOHX3092G | hydraulic withdrawal | AOHX3092G |
| 440 mm | — | AOHX3192G | hydraulic withdrawal | AOHX3192G |
| 440 mm | — | AOHX3292G | hydraulic withdrawal | AOHX3292G |
| 460 mm | — | AOH24196 | hydraulic withdrawal | AOH24196 |
| 460 mm | — | AOHX3096G | hydraulic withdrawal | AOHX3096G |
| 460 mm | — | AOHX3196G | hydraulic withdrawal | AOHX3196G |
| 480 mm | — | AOHX30/500G | hydraulic withdrawal | AOHX30/500G |
| 480 mm | — | AOHX32/500G | hydraulic withdrawal | AOHX32/500G |
| 480 mm | 205 mm | AOH241/500 | hydraulic withdrawal | AOH241/500 |
| 500 mm | 200 mm | AOH240/530G | hydraulic withdrawal | AOH240/530G |
| 500 mm | 205 mm | AOH241/530G | hydraulic withdrawal | AOH241/530G |
| 500 mm | 530 mm | AOH30/530 | hydraulic withdrawal | AOH30/530 |
| 500 mm | 530 mm | AOH31/530 | hydraulic withdrawal | AOH31/530 |
| 530 mm | 205 mm | AOH241/560 | hydraulic withdrawal | AOH241/560 |
| 530 mm | 205 mm | AOH241/560G | hydraulic withdrawal | AOH241/560G |
| 530 mm | 560 mm | AOH31/560 | hydraulic withdrawal | AOH31/560 |
| 530 mm | 560 mm | AOHX30/560 | hydraulic withdrawal | AOHX30/560 |
| 570 mm | 600 mm | AOHX30/600 | hydraulic withdrawal | AOHX30/600 |
| 570 mm | 600 mm | AOHX31/600 | hydraulic withdrawal | AOHX31/600 |
| 600 mm | 200 mm | AOH240/630G | hydraulic withdrawal | AOH240/630G |
| 600 mm | 630 mm | AOH30/630 | hydraulic withdrawal | AOH30/630 |
| 630 mm | 205 mm | AOH241/670 | hydraulic withdrawal | AOH241/670 |
| 630 mm | 670 mm | AOH30/670 | hydraulic withdrawal | AOH30/670 |
| 630 mm | 670 mm | AOHX31/670 | hydraulic withdrawal | AOHX31/670 |
| 670 mm | 710 mm | AOHX30/710 | hydraulic withdrawal | AOHX30/710 |
| 670 mm | 710 mm | AOHX31/710 | hydraulic withdrawal | AOHX31/710 |
| 750 mm | 205 mm | AOH241/800G | hydraulic withdrawal | AOH241/800G |
| 800 mm | 200 mm | AOH240/850G | hydraulic withdrawal | AOH240/850G |
| 850 mm | 200 mm | AOH240/900 | hydraulic withdrawal | AOH240/900 |
| 850 mm | 205 mm | AOH241/900 | hydraulic withdrawal | AOH241/900 |
Part numbers and designations are those of the original manufacturers and are given for identification. cBallast is an independent supplier; confirm ratings against the nameplate of the installed equipment before ordering. Table generated from the cBallast catalogue on 2026-09-29.