Bürkert Inline Flowmeter for Continuous Measurements

The flowmeter Type 8030/8030-HT with paddle wheel is especially suited for use with neutral or mildly aggressive, particle-free liquids. The device consists of a compact Inline sensor-fitting (Type S030/S030-HT) and a transmitter (Type SE30/SE30-HT). Assembly is quick and simple thanks to a mounting/bayonet catch system. Bürkert’s “Inline Quarter-Turn” technology guarantees leak-free operation. Bürkert’s proprietary sensor fitting system ensures simple installation of the devices into all pipelines from DN 06 to DN 65. The device generates a pulse frequency signal proportional to the flow velocity. The signal can be processed by a Bürkert Transmitter/Controller.

Screw

Stainless steel

Plug contact

3P+PE:

Female cable plug

Body, contact holder and cable gland in PA

Axis

Ceramics (Al2O3)

Seal

FKM or EPDM, depending on the Inline sensor-fitting variant Type S030

Compatibility

Any pipe from DN 06…DN 65 which are fitted with Bürkert Type S030 Inline sensor-fitting.

Pipe diameter

DN 06…DN 65

Measuring principle

Paddle wheel

Measurement deviation

Teach-in: ± 1 % of the measured value at teach-in flow rate value

Linearity

± 0.5 % of full scale

Repeatability

± 0.4 % of the measured value

Power source (not supplied)

Limited power source according to UL/EN 62368‑1 standards or limited energy circuit according to UL/

Voltage supply cable

Cable with maximum operating temperature greater than 80 °C

Viscosity

Max. 300 cSt

Rate of solid particles

Max. 1 %

HS Code

9026.10

• Burkert 8030
• Buerkert 8030
• Bürkert 8030
• Type 8030
• Burkert Type 8030