Bürkert Flow Transmitter / Pulse Divider

The electronic module Type 8022 operates either as a flow transmitter (only with pulse sensors "Low Power" variant Type 8020, Type 8030 (SE30+S030), Type SE30+S077) or as a pulse divider (with all sensor variants Type 8020, Type 8030 (SE30+S030), Type SE30+S077). The module operates the output of the sensors, displays the flow rate and outputs it in mA or as a pulse at the signal output. When used as a flow transmitter, the frequency signal of the sensor is converted into a 4…20 mA signal (2-wire operation), as a pulse divider, the input frequency is converted into an adjustable output frequency. Use of the operating unit enables switching between the two operating modes.

Cover seal

EPDM

Housing

PA (Polyamide)

Screw

Steel class 4.8, galvanized with chrome-III thick film passivation

Seal

NBR

Cable gland

PA (Polyamide)

Keypad

3 operating keys

Compatibility

Flow transmitter (2-wire operation): only if connected with sensor Type 8020, Type 8030

NPN/PNP output uncertainty

± 1 % of measured value

Operating voltage

12…30 V DC ± 10 %, filtered and regulated

Power source (not supplied)

Limited power source according to UL/EN 62368‑1 standards or limited energy circuit according to UL/

Power consumption

Flow transmitter (2-wire operation): 0.6 W

Input

Frequency: 1…600 Hz

Output

Flow transmitter (2-wire operation):

Electrical connection

Terminal strip or male M12 connector, 4-pin

Ambient temperature

Operation and storage: - 10…+ 60 °C

HS Code

9032.89

• Burkert 8022
• Buerkert 8022
• Bürkert 8022
• Type 8022
• Burkert Type 8022