Bürkert Direct-acting 2/2-WAY Plunger Valve Type 7011

The 7011 valve is a direct-acting plunger valve. The stopper and the core guide tube are welded together to increase pressure resistance and leak-tightness. Various housing and seal material combinations are available depending on the actual application. A Bürkert-specific flange variant (SFB) enables the space-saving arrangement of valves on a multiple manifold. The range is supplemented by variants conforming to DVGW EN 161 and explosion-proof variants. Push-in fittings can be selected for a flexible hose connection. In combination with a plug conforming to DIN EN 175301-803 shape B, the valves satisfy degree of protection IP65.

Seal

FKM, EPDM

Body

Brass, polyamide (PA), stainless steel 1.4305/303

Standard variant

146 g (with G ⅛)

Orifice

DN 1.2…DN 2.4

Thermal insulation class of

Epoxy coil class H

Single valve

100 % resp. 50 % continuous operation

Switching time

Opening: 8…15 ms

Operating voltage

24 V DC, 24 V 60 Hz, 110 V 50 Hz, 120 V 60 Hz, 230 V 50 Hz, 240 V 60 Hz

Voltage tolerance

± 10 %

Operating medium

Neutral gases and liquids (e.g. compressed air, water, hydraulic oil, technical vacuum)

Medium temperature

- 10 °C…+ 100 °C

Viscosity

Max. 21 mm2/s

Electrical connection

According to DIN EN 175301 - 803 form C for cable plug Type 2516 

Port connection

M5, G ⅛, NPT ⅛, flange

Degree of protection

IP65 with cable plug and ATEX/IECEx cable variant

HS Code

8481.80

• Burkert 7011
• Buerkert 7011
• Bürkert 7011
• Type 7011
• Burkert Type 7011