Trojan Lamp Connector — for UVSwift SCA

The lamp connector for Trojan UVSwift SCA reactors: the sealed plug and lead that carries the drive current from the ballast to the UV lamp inside the reactor end chamber. It is a wet-environment, high-voltage connection that is repeatedly disturbed — every lamp change unplugs it — so it is a genuine wear part rather than fixed wiring. The usual failure is degradation at the contact rather than a clean break: a lamp that strikes intermittently, reports a fault under vibration, or shows scorching or greening at the pins is pointing at the connector and not necessarily at the lamp or the ballast. Replace it as an assembly; the moulded seal is what keeps condensation out of the contact. Supplied by cBallast on quote-to-invoice terms; lead time and freight are quoted per RFQ against the destination Incoterm.

Product type

UV lamp connector (lamp lead / socket assembly)

Fits Trojan reactors

UVSwift SCA

Function

Carries ballast output to the UV lamp inside the reactor end chamber

Service note

Wear part — inspect the contacts at every lamp change

HS code

8539.49

HS Code

8539.49

• Article 1577-1208
• 1577-1208