Trojan Lamp Cable, System 8000 Series

The lamp cable for Trojan System 8000 series UV reactors, Trojan original part number 302484. It carries the ballast output to the lamp’s end connector inside the reactor head. A lamp cable is a wear item in this position: it sits in a warm, damp enclosure and is disturbed every time a lamp is drawn, so the insulation hardens and the connector contacts corrode. The symptoms are recognisable — a lamp that strikes intermittently, a lamp-failure alarm that comes and goes, or one position that will not strike at all while the ballast behind it tests good — and they are routinely misread as a lamp or ballast fault. This cable is listed against the full width of the 8000 range, from the 8002/S10 through to the 8032HO-60. Item number 1553-1007. Trojan original part number 302484. Supplied by cBallast on quote-to-invoice terms; lead time and freight are quoted per RFQ against the destination Incoterm.

Part type

Lamp cable

Original part number

302484

Compatible systems

Trojan 8002/S10, 8004S, 8004/S15, 8004HO-20, 8006S, 8006/S20, 8006HO, 8006HO-20, 8006HO-30, 8008/S20, 8008HO-35, 8010HO-40, 8012HO-30, 8012HO-40, 8012HO-45, 8016HO-50, 8024HO-60, 8032HO-60

HS code

8539.49

HS Code

8539.49

• Article 1553-1007
• Trojan 302484