Siemens SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width

Siemens 6ES7136-6DB00-0CA0 — SIMATIC S7 automation module. Compact controller or expansion module for the S7-1200 or S7-1500 PLC platform. Failsafe digital output module, 4 F-DQ.

Manufacturer part number (MPN)

6ES7136-6DB00-0CA0

EAN / GTIN

4025515082750

Sales unit

pcs

Product type designation

F-DQ 4x24VDC/2A PM HF

Usable BaseUnits

BU type A0

Product function — I&M data

Yes; I&M0 to I&M3

Engineering with — STEP 7 TIA Portal configurable/integrated from version

V12

Engineering with — STEP 7 configurable/integrated from version

V5.5 SP3 / -

Engineering with — PROFINET from GSD version/GSD revision

V2.31

Rated value (DC)

24 V

Permissible range, lower limit (DC)

19.2 V

Permissible range, upper limit (DC)

28.8 V

Reverse polarity protection

Yes

Power supply according to NEC Class 2 required

No

Current consumption (rated value)

75 mA; without load

Current consumption, max.

21 mA; From the backplane bus

Power consumption from the backplane bus

70 mW

Power loss, typ.

4 W

Address space per module — Inputs

5 byte

Address space per module — Outputs

5 byte

Type of digital output

Transistor

Number of digital outputs

4

Digital outputs, parameterizable

Yes

Short-circuit protection

Yes

Short-circuit protection — Response threshold, typ.

> 3.3 A

Open-circuit detection — Response threshold, typ.

8 mA

Overload protection

Yes

Overload protection — Response threshold, typ.

2.9 A

Limitation of inductive shutdown voltage to

Typ. -2x 47 V

Controlling a digital input

Yes; digital output, according to IEC 61131-2, type 2

Switching capacity of the outputs — with resistive load, max.

2 A

Switching capacity of the outputs — on lamp load, max.

10 W

Load resistance range — lower limit

12 Ω

Load resistance range — upper limit

2 000 Ω

Output voltage — for signal "1", min.

24 V; L+ (-0.5 V)

Output current — for signal "1" rated value

2 A

Output current — for signal "0" residual current, max.

0.5 mA

Switching frequency — with resistive load, max.

30 Hz; Symmetrical

Switching frequency — with inductive load, max.

0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical

Switching frequency — on lamp load, max.

10 Hz; Symmetrical

Total current of the outputs — Current per channel, max.

2 A; note derating data in the manual

Total current of the outputs — Current per module, max.

6 A; note derating data in the manual

Cable length — shielded, max.

1 000 m

Cable length — unshielded, max.

500 m

Diagnostics function

Yes; See Chapter "Alarms/diagnostic messages" in the manual

Diagnostics indication LED — RUN LED

Yes; green LED

Diagnostics indication LED — ERROR LED

Yes; red LED

Diagnostics indication LED — Monitoring of the supply voltage (PWR-LED)

Yes; green PWR LED

Diagnostics indication LED — Channel status display

Yes; green LED

Diagnostics indication LED — for channel diagnostics

Yes; red LED

Diagnostics indication LED — for module diagnostics

Yes; green/red DIAG LED

Potential separation channels — between the channels and the power supply of the electronics

No

Isolation tested with

707 V DC (type test)

Highest safety class achievable in safety mode — SIL acc. to IEC 61508

SIL 3

Ambient temperature during operation — horizontal installation, min.

0 °C

Ambient temperature during operation — horizontal installation, max.

60 °C

Ambient temperature during operation — vertical installation, min.

0 °C

Ambient temperature during operation — vertical installation, max.

50 °C

Altitude during operation relating to sea level — Installation altitude above sea level, max.

4 000 m; Restrictions for installation altitudes > 2 000 m, see manual

Dimensions — Width

15 mm

Dimensions — Height

73 mm

Dimensions — Depth

58 mm

Weight, approx.

57 g

Supporting protocol for EtherCAT

Yes

Voltage type (supply voltage)

DC

Digital inputs configurable

Yes

Type of voltage (input voltage)

DC

Output current

2 A

Permitted voltage at output

19.2–28.8 V

Type of output voltage

DC

Degree of protection (IP)

IP20

Type of electric connection

Spring clamp connection

SIL according to IEC 61508

3

Performance level according to EN ISO 13849-1

Level e

Explosion safety category for gas

ATEX gas-ex-protection, Cat. 3G

Explosion safety category for dust

None

Width

15 mm

Height

73 mm

Depth

58 mm

Country of origin

Germany

HS Code

8538.90

• EAN 4025515082750
• SAP 1000500674
• Code 8871681