Danfoss BSV 8 safety relief valve, G 3/4 in x 1 in, set pressure 10 bar (145 psig), Danfoss pressure certificate

Danfoss BSV 8 back-pressure-independent safety relief valve, code 2416+200, set pressure 10 bar (145 psig). The BSV 8 is an angle-way safety relief valve designed to protect small refrigeration components against excessive pressure, and is also used as the pilot valve for the pilot-operated internal safety valve type POV. Because it is back-pressure independent it is recommended as an internal safety relief valve, but can equally serve as an external safety relief valve; the spring housing is tightly sealed against refrigerant leakage. Inlet connection G 3/4 in, outlet 1 in (ISO 228-1 parallel pipe thread); inlet flow diameter 8.0 mm (5/16 in), flow area 50 mm2 (0.078 in2), certified discharge coefficient (Kdr) 0.43, lift 1.45 mm. Body is special steel approved for low-temperature service; spindle and seat are stainless steel. Media temperature range -30 to 100 C (-22 to 212 F) when used as an external safety relief valve. Set after adjustment at the Danfoss factory and sealed; supplied with a Danfoss pressure certificate. PED conformity assessment category IV. Strength-test pressure 43 bar (624 psig); leakage-safety pressure 25 bar (363 psig). Applicable to common HFC/HCFC refrigerants and to R717 (ammonia) and R744 (CO2). Specifications per Danfoss store code 2416+200.

Type

BSV 8 back-pressure-independent safety relief valve

Code number

2416+200

Series

BSV (refrigeration safety relief valve)

Set pressure

10 bar (145 psig)

Pressure-setting range (family)

10 to 25 bar (145 to 363 psig)

Direction

Angle-way

Inlet connection

G 3/4 in (ISO 228-1 parallel pipe thread)

Outlet connection

1 in (ISO 228-1 parallel pipe thread)

Inlet flow diameter

8.0 mm (5/16 in)

Flow area

50 mm2 (0.078 in2)

Certified discharge coefficient (Kdr)

0.43

Lift

1.45 mm

Body material

Special steel approved for low-temperature application

Spindle and seat material

Stainless steel

Media temperature range

-30 to 100 C (-22 to 212 F)

Strength-test pressure

43 bar (624 psig)

Leakage-safety pressure

25 bar (363 psig)

Applicable media

HCFC, HFC, R717 (ammonia), R744 (CO2)

Conformity assessment

PED 2014/68/EU, category IV

Pressure certificate

Danfoss pressure certificate supplied with each valve

Approvals

CE, EAC, LLC CDC TYSK, TS

Net weight

1.563 kg

Gross weight

1.646 kg

EAN

5702428193047

Size / Series

G 3/4 in inlet x 1 in outlet

Material

Special low-temperature steel body; stainless steel spindle and seat

Thread Standard

ISO 228-1

Pressure Rating

10 bar (145 psig) set pressure

Temperature Range

-30 to 100 C

HS Code

8481.40