Bürkert 3/2-WAY Flipper Solenoid Valve, Direct-acting

Type 6144 is a direct-acting 3/2-way solenoid valve designed for neutral gases and liquids. Through the movement between the two end positions, the switching element (flipper) seals one of the two opposing valve seats and connects the other to the working port. This movement is caused by the magnetic field pushing a permanent magnet, which is fixed to the flipper element, when switching the solenoid. This valve design makes it possible to realise both monostable and bistable variants. In addition to its exceptional performance characteristics, the flipper principle is especially marked by its very low switching noise and low wear level. Furthermore, integrated medium separation enables use above and beyond pneumatic applications. Depending on the application, various flange connections are available that are suitable for both individual and block installation. Installation advice: The valve must be at least 5 mm away from other ferromagnetic materials in order to avoid malfunctioning during operation.

Seal

FKM (other materials on request) Valve body: PPS minimum bending radius: for Single bending: 8.5 mm radius Orifice: DN 0.6 Circuit function: C, D and T, monostable Duty cycle: 100 % continuous operation Standard variant: Opening: approx. 8 ms (pressure rise 0…10 %) Explosion-proof variant: Opening: approx. 14 ms (pressure rise 0…10 %) Operating voltage: 12 V DC, 24 V DC (other voltages on request) Impulse variant: Switching 0.8 W (impulse length minimum 50 ms), holding power 0 W Switching frequency: Approx. 17 Hz Voltage tolerance: ± 10 % Operating medium: Lubricated or oil-free compressed dry air, neutral gases and liquids (5 μm filtering) Medium temperature: - 10 °C…+ 55 °C Electrical connection: Cable plug Type 2505 

HS Code

8481.80

• Burkert 6144
• Buerkert 6144
• Bürkert 6144
• Type 6144
• Burkert Type 6144