V-Belt Pulley Finder — SPZ, SPA, SPB, SPC, Z/A/B/C, 3V/5V/8V by Number of Grooves and Pitch Diameter (Taper Bush and QD, SKF PHP)

Size finder compiled by cBallast. 6-page PDF; the full content is on this page.

Compiled by

cBallast

Subject

Wedge-belt and classical V-belt pulleys (sheaves) for taper bushes

Document type

Size finder

Reference

catalogue 2026-09-29

Issued

2026-09-29

Pages

Format

Web page and PDF

V-Belt Pulley Finder

A V-belt pulley is specified by belt section (SPZ, SPA, SPB, SPC wedge belts; Z, A, B, C, D classical belts; 3V, 5V, 8V narrow inch belts), number of grooves and pitch diameter, plus the mounting: taper bush (TB), QD bush (SDS, SK, SF, E) or a solid hub for machining. The SKF designation carries all of these — PHP 5SPZ250TB is a five-groove SPZ pulley of 250 mm pitch diameter for a taper bush. Pitch diameter and groove count set the speed ratio and the belt count; the bush size is fixed by the pulley. The finder lists the catalogue by belt section, grooves and pitch diameter so an equivalent pulley can be matched to an existing drive.

The pulley groove profile must match the belt section — SPA belts do not run correctly in A grooves and vice versa, although SPZ/Z and SPB/B pairs share a groove angle on many pulleys marked with both letters. Check that the bush bore range covers the shaft (e.g. bush 2517 = 16–60 mm) and that the pulley rim speed stays below 30 m/s for cast iron. Replace both pulleys and the belts when wear has widened the groove.

Coverage: 1,600 of 2,133 catalogue rows with a readable size are listed (3,855 rows in these categories in total; the remainder can be found through the site search by part number).

SPZ section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
1	50 mm	Taper bush 1008	SPZ	PHP1SPZ50TB	SKF
1	50 mm	—	SPZ	ZT00501	—
1	56 mm	Taper bush 1008	SPZ	PHP1SPZ56TB	SKF
1	60 mm	Taper bush 1008	SPZ	PHP1SPZ60TB	SKF
1	63 mm	Taper bush 1108	SPZ	PHP1SPZ63TB	SKF
1	67 mm	Taper bush 1108	SPZ	PHP1SPZ67TB	SKF
1	71 mm	Taper bush 1108	SPZ	PHP1SPZ71TB	SKF
1	75 mm	Taper bush 1108	SPZ	PHP1SPZ75TB	SKF
1	75 mm	—	SPZ	ZT00751	—
1	80 mm	Taper bush 1210	SPZ	PHP1SPZ80TB	SKF
1	80 mm	—	SPZ	ZT00801	—
1	85 mm	Taper bush 1210	SPZ	PHP1SPZ85TB	SKF
1	90 mm	Taper bush 1210	SPZ	PHP1SPZ90TB	SKF
1	95 mm	Taper bush 1210	SPZ	PHP1SPZ95TB	SKF
1	95 mm	—	SPZ	ZT00951	—
1	100 mm	Taper bush 1210	SPZ	PHP1SPZ100TB	SKF
1	100 mm	—	SPZ	ZT01001	—
1	106 mm	Taper bush 1610	SPZ	PHP1SPZ106TB	SKF
1	106 mm	—	SPZ	ZT01061	—
1	112 mm	Taper bush 1610	SPZ	PHP1SPZ112TB	SKF
1	112 mm	—	SPZ	ZT01121	—
1	118 mm	Taper bush 1610	SPZ	PHP1SPZ118TB	SKF
1	118 mm	—	SPZ	ZT01181	—
1	125 mm	Taper bush 1610	SPZ	PHP1SPZ125TB	SKF
1	132 mm	Taper bush 1610	SPZ	PHP1SPZ132TB	SKF
1	140 mm	Taper bush 1610	SPZ	PHP1SPZ140TB	SKF
1	140 mm	—	SPZ	ZT01401	—
1	150 mm	Taper bush 1610	SPZ	PHP1SPZ150TB	SKF
1	150 mm	—	SPZ	ZT01501	—
1	160 mm	Taper bush 1610	SPZ	PHP1SPZ160TB	SKF
1	170 mm	Taper bush 1610	SPZ	PHP1SPZ170TB	SKF
1	170 mm	—	SPZ	ZT01701	—
1	180 mm	Taper bush 1610	SPZ	PHP1SPZ180TB	SKF
1	180 mm	—	SPZ	ZT01801	—
1	190 mm	Taper bush 1610	SPZ	PHP1SPZ190TB	SKF
1	200 mm	Taper bush 2012	SPZ	PHP1SPZ200TB	SKF
1	224 mm	Taper bush 2012	SPZ	PHP1SPZ224TB	SKF
1	224 mm	—	SPZ	ZT02241	—
1	236 mm	Taper bush 2012	SPZ	PHP1SPZ236TB	SKF
1	250 mm	Taper bush 2012	SPZ	PHP1SPZ250TB	SKF
1	280 mm	Taper bush 2012	SPZ	PHP1SPZ280TB	SKF
1	315 mm	Taper bush 2012	SPZ	PHP1SPZ315TB	SKF
1	315 mm	—	SPZ	ZT03151	—
1	355 mm	Taper bush 2012	SPZ	PHP1SPZ355TB	SKF
1	355 mm	—	SPZ	ZT04001	—
1	355 mm	—	SPZ	ZT03551	—
1	400 mm	Taper bush 2012	SPZ	PHP1SPZ400TB	SKF
1	450 mm	Taper bush 2517	SPZ	PHP1SPZ450TB	SKF
1	500 mm	Taper bush 2517	SPZ	PHP1SPZ500TB	SKF
2	50 mm	Taper bush 1008	SPZ	PHP2SPZ50TB	SKF
2	50 mm	—	SPZ	ZM00502	—
2	56 mm	Taper bush 1008	SPZ	PHP2SPZ56TB	SKF
2	56 mm	—	SPZ	ZT00562	—
2	60 mm	Taper bush 1108	SPZ	PHP2SPZ60TB	SKF
2	60 mm	—	SPZ	ZT00602	—
2	63 mm	Taper bush 1108	SPZ	PHP2SPZ63TB	SKF
2	63 mm	—	SPZ	ZT00632	—
2	67 mm	Taper bush 1108	SPZ	PHP2SPZ67TB	SKF
2	71 mm	Taper bush 1108	SPZ	PHP2SPZ71TB	SKF
2	75 mm	Taper bush 1210	SPZ	PHP2SPZ75TB	SKF
2	80 mm	Taper bush 1210	SPZ	PHP2SPZ80TB	SKF
2	85 mm	Taper bush 1610	SPZ	PHP2SPZ85TB	SKF
2	90 mm	Taper bush 1610	SPZ	PHP2SPZ90TB	SKF
2	95 mm	Taper bush 1610	SPZ	PHP2SPZ95TB	SKF
2	95 mm	—	SPZ	ZT00952	—
2	100 mm	Taper bush 1610	SPZ	PHP2SPZ100TB	SKF
2	106 mm	Taper bush 1610	SPZ	PHP2SPZ106TB	SKF
2	106 mm	—	SPZ	ZT01062	—
2	112 mm	Taper bush 1610	SPZ	PHP2SPZ112TB	SKF
2	112 mm	—	SPZ	ZT01122	—
2	118 mm	Taper bush 1610	SPZ	PHP2SPZ118TB	SKF
2	118 mm	—	SPZ	ZT01182	—
2	125 mm	Taper bush 1610	SPZ	PHP2SPZ125TB	SKF
2	125 mm	—	SPZ	ZT01252	—
2	132 mm	Taper bush 1610	SPZ	PHP2SPZ132TB	SKF
2	132 mm	—	SPZ	ZT01322	—
2	140 mm	Taper bush 1610	SPZ	PHP2SPZ140TB	SKF
2	140 mm	—	SPZ	ZT01402	—
2	150 mm	Taper bush 2012	SPZ	PHP2SPZ150TB	SKF
2	160 mm	Taper bush 2012	SPZ	PHP2SPZ160TB	SKF
2	170 mm	Taper bush 2012	SPZ	PHP2SPZ170TB	SKF
2	170 mm	—	SPZ	ZT01702	—
2	180 mm	Taper bush 2012	SPZ	PHP2SPZ180TB	SKF
2	190 mm	Taper bush 2012	SPZ	PHP2SPZ190TB	SKF
2	200 mm	Taper bush 2012	SPZ	PHP2SPZ200TB	SKF
2	212 mm	Taper bush 2012	SPZ	PHP2SPZ212TB	SKF
2	224 mm	Taper bush 2012	SPZ	PHP2SPZ224TB	SKF
2	236 mm	Taper bush 2012	SPZ	PHP2SPZ236TB	SKF
2	250 mm	Taper bush 2012	SPZ	PHP2SPZ250TB	SKF
2	280 mm	Taper bush 2012	SPZ	PHP2SPZ280TB	SKF
2	315 mm	Taper bush 2012	SPZ	PHP2SPZ315TB	SKF
2	315 mm	—	SPZ	ZT03152	—
2	355 mm	Taper bush 2012	SPZ	PHP2SPZ355TB	SKF
2	400 mm	Taper bush 2517	SPZ	PHP2SPZ400TB	SKF
2	450 mm	Taper bush 2517	SPZ	PHP2SPZ450TB	SKF
2	500 mm	Taper bush 2517	SPZ	PHP2SPZ500TB	SKF
2	500 mm	—	SPZ	ZT05002	—
2	630 mm	Taper bush 3020	SPZ	PHP2SPZ630TB	SKF
3	63 mm	Taper bush 1108	SPZ	PHP3SPZ63TB	SKF
3	67 mm	Taper bush 1108	SPZ	PHP3SPZ67TB	SKF
3	71 mm	Taper bush 1108	SPZ	PHP3SPZ71TB	SKF
3	71 mm	—	SPZ	ZT00713	—
3	75 mm	Taper bush 1210	SPZ	PHP3SPZ75TB	SKF
3	80 mm	Taper bush 1210	SPZ	PHP3SPZ80TB	SKF
3	85 mm	Taper bush 1610	SPZ	PHP3SPZ85TB	SKF
3	85 mm	—	SPZ	ZT00853	—
3	90 mm	Taper bush 1610	SPZ	PHP3SPZ90TB	SKF
3	95 mm	Taper bush 1610	SPZ	PHP3SPZ95TB	SKF
3	95 mm	—	SPZ	ZT00953	—
3	100 mm	Taper bush 1610	SPZ	PHP3SPZ100TB	SKF
3	106 mm	Taper bush 1610	SPZ	PHP3SPZ106TB	SKF
3	106 mm	—	SPZ	ZT01063	—
3	112 mm	Taper bush 2012	SPZ	PHP3SPZ112TB	SKF
3	118 mm	Taper bush 2012	SPZ	PHP3SPZ118TB	SKF
3	118 mm	—	SPZ	ZT01183	—
3	125 mm	Taper bush 2012	SPZ	PHP3SPZ125TB	SKF
3	125 mm	—	SPZ	ZT01253	—
3	132 mm	Taper bush 2012	SPZ	PHP3SPZ132TB	SKF
3	140 mm	Taper bush 2012	SPZ	PHP3SPZ140TB	SKF
3	150 mm	Taper bush 2012	SPZ	PHP3SPZ150TB	SKF
3	150 mm	—	SPZ	ZT01503	—
3	160 mm	Taper bush 2012	SPZ	PHP3SPZ160TB	SKF
3	170 mm	Taper bush 2012	SPZ	PHP3SPZ170TB	SKF
3	170 mm	—	SPZ	ZT01703	—
3	180 mm	Taper bush 2012	SPZ	PHP3SPZ180TB	SKF
3	180 mm	—	SPZ	ZT01803	—
3	190 mm	Taper bush 2012	SPZ	PHP3SPZ190TB	SKF
3	200 mm	Taper bush 2012	SPZ	PHP3SPZ200TB	SKF
3	212 mm	Taper bush 2012	SPZ	PHP3SPZ212TB	SKF
3	224 mm	Taper bush 2012	SPZ	PHP3SPZ224TB	SKF
3	224 mm	—	SPZ	ZT02243	—
3	236 mm	Taper bush 2012	SPZ	PHP3SPZ236TB	SKF
3	250 mm	Taper bush 2012	SPZ	PHP3SPZ250TB	SKF
3	280 mm	Taper bush 2517	SPZ	PHP3SPZ280TB	SKF
3	315 mm	Taper bush 2517	SPZ	PHP3SPZ315TB	SKF
3	355 mm	Taper bush 2517	SPZ	PHP3SPZ355TB	SKF
3	400 mm	Taper bush 2517	SPZ	PHP3SPZ400TB	SKF
3	450 mm	Taper bush 2517	SPZ	PHP3SPZ450TB	SKF
3	500 mm	Taper bush 2517	SPZ	PHP3SPZ500TB	SKF
3	630 mm	Taper bush 3020	SPZ	PHP3SPZ630TB	SKF
3	800 mm	Taper bush 3020	SPZ	PHP3SPZ800TB	SKF
4	80 mm	Taper bush 1210	SPZ	PHP4SPZ80TB	SKF
4	85 mm	Taper bush 1610	SPZ	PHP4SPZ85TB	SKF
4	85 mm	—	SPZ	ZT00854	—
4	90 mm	Taper bush 1610	SPZ	PHP4SPZ90TB	SKF
4	95 mm	Taper bush 1610	SPZ	PHP4SPZ95TB	SKF
4	95 mm	—	SPZ	ZT00954	—
4	100 mm	Taper bush 1610	SPZ	PHP4SPZ100TB	SKF
4	106 mm	Taper bush 1610	SPZ	PHP4SPZ106TB	SKF
4	112 mm	Taper bush 2012	SPZ	PHP4SPZ112TB	SKF
4	118 mm	Taper bush 2012	SPZ	PHP4SPZ118TB	SKF
4	125 mm	Taper bush 2012	SPZ	PHP4SPZ125TB	SKF
4	132 mm	Taper bush 2012	SPZ	PHP4SPZ132TB	SKF
4	140 mm	Taper bush 2012	SPZ	PHP4SPZ140TB	SKF
4	140 mm	—	SPZ	ZT01404	—
4	150 mm	Taper bush 2517	SPZ	PHP4SPZ150TB	SKF
4	160 mm	Taper bush 2517	SPZ	PHP4SPZ160TB	SKF
4	170 mm	Taper bush 2517	SPZ	PHP4SPZ170TB	SKF
4	180 mm	Taper bush 2517	SPZ	PHP4SPZ180TB	SKF
4	190 mm	Taper bush 2517	SPZ	PHP4SPZ190TB	SKF
4	200 mm	Taper bush 2517	SPZ	PHP4SPZ200TB	SKF
4	200 mm	—	SPZ	ZT02004	—
4	212 mm	Taper bush 2517	SPZ	PHP4SPZ212TB	SKF
4	224 mm	Taper bush 2517	SPZ	PHP4SPZ224TB	SKF
4	224 mm	—	SPZ	ZT02244	—
4	236 mm	Taper bush 2517	SPZ	PHP4SPZ236TB	SKF
4	250 mm	Taper bush 2517	SPZ	PHP4SPZ250TB	SKF
4	250 mm	—	SPZ	ZT02504	—
4	280 mm	Taper bush 2517	SPZ	PHP4SPZ280TB	SKF
4	315 mm	Taper bush 2517	SPZ	PHP4SPZ315TB	SKF
4	355 mm	Taper bush 2517	SPZ	PHP4SPZ355TB	SKF
4	400 mm	Taper bush 2517	SPZ	PHP4SPZ400TB	SKF
4	400 mm	—	SPZ	ZT04004	—
4	450 mm	Taper bush 3020	SPZ	PHP4SPZ450TB	SKF
4	500 mm	Taper bush 3020	SPZ	PHP4SPZ500TB	SKF
4	630 mm	Taper bush 3030	SPZ	PHP4SPZ630TB	SKF
4	800 mm	Taper bush 3030	SPZ	PHP4SPZ800TB	SKF
4	800 mm	—	SPZ	ZT08004	—
5	85 mm	Taper bush 1610	SPZ	PHP5SPZ85TB	SKF
5	90 mm	Taper bush 1610	SPZ	PHP5SPZ90TB	SKF
5	95 mm	Taper bush 1610	SPZ	PHP5SPZ95TB	SKF
5	100 mm	Taper bush 2012	SPZ	PHP5SPZ100TB	SKF
5	100 mm	—	SPZ	ZT01005	—
5	106 mm	Taper bush 2012	SPZ	PHP5SPZ106TB	SKF
5	112 mm	Taper bush 2012	SPZ	PHP5SPZ112TB	SKF
5	118 mm	Taper bush 2012	SPZ	PHP5SPZ118TB	SKF
5	125 mm	Taper bush 2012	SPZ	PHP5SPZ125TB	SKF
5	125 mm	—	SPZ	ZT01255	—
5	132 mm	Taper bush 2517	SPZ	PHP5SPZ132TB	SKF
5	140 mm	Taper bush 2517	SPZ	PHP5SPZ140TB	SKF
5	140 mm	—	SPZ	ZT01405	—
5	150 mm	Taper bush 2517	SPZ	PHP5SPZ150TB	SKF
5	150 mm	—	SPZ	ZT01505	—
5	160 mm	Taper bush 2517	SPZ	PHP5SPZ160TB	SKF
5	170 mm	Taper bush 2517	SPZ	PHP5SPZ170TB	SKF
5	180 mm	Taper bush 2517	SPZ	PHP5SPZ180TB	SKF
5	190 mm	Taper bush 2517	SPZ	PHP5SPZ190TB	SKF
5	200 mm	Taper bush 2517	SPZ	PHP5SPZ200TB	SKF
5	212 mm	Taper bush 2517	SPZ	PHP5SPZ212TB	SKF
5	224 mm	Taper bush 2517	SPZ	PHP5SPZ224TB	SKF
5	236 mm	Taper bush 2517	SPZ	PHP5SPZ236TB	SKF
5	250 mm	Taper bush 2517	SPZ	PHP5SPZ250TB	SKF
5	280 mm	Taper bush 2517	SPZ	PHP5SPZ280TB	SKF
5	315 mm	Taper bush 2517	SPZ	PHP5SPZ315TB	SKF
5	355 mm	Taper bush 2517	SPZ	PHP5SPZ355TB	SKF
5	400 mm	Taper bush 3020	SPZ	PHP5SPZ400TB	SKF
5	450 mm	Taper bush 3020	SPZ	PHP5SPZ450TB	SKF
5	450 mm	—	SPZ	ZT04505	—
5	500 mm	Taper bush 3030	SPZ	PHP5SPZ500TB	SKF
5	630 mm	Taper bush 3030	SPZ	PHP5SPZ630TB	SKF
5	710 mm	Taper bush 3535	SPZ	PHP5SPZ710TB	SKF
5	800 mm	Taper bush 3535	SPZ	PHP5SPZ800TB	SKF
6	90 mm	Taper bush 1610	SPZ	PHP6SPZ90TB	SKF
6	95 mm	Taper bush 1610	SPZ	PHP6SPZ95TB	SKF
6	100 mm	Taper bush 2012	SPZ	PHP6SPZ100TB	SKF
6	106 mm	Taper bush 2012	SPZ	PHP6SPZ106TB	SKF
6	112 mm	Taper bush 2012	SPZ	PHP6SPZ112TB	SKF
6	118 mm	Taper bush 2517	SPZ	PHP6SPZ118TB	SKF
6	125 mm	Taper bush 2517	SPZ	PHP6SPZ125TB	SKF
6	132 mm	Taper bush 2517	SPZ	PHP6SPZ132TB	SKF
6	132 mm	—	SPZ	ZT01326	—
6	140 mm	Taper bush 2517	SPZ	PHP6SPZ140TB	SKF
6	140 mm	—	SPZ	ZT01406	—
6	150 mm	Taper bush 2517	SPZ	PHP6SPZ150TB	SKF
6	160 mm	Taper bush 2517	SPZ	PHP6SPZ160TB	SKF
6	170 mm	Taper bush 2517	SPZ	PHP6SPZ170TB	SKF
6	180 mm	Taper bush 2517	SPZ	PHP6SPZ180TB	SKF
6	180 mm	—	SPZ	ZT01806	—
6	190 mm	Taper bush 2517	SPZ	PHP6SPZ190TB	SKF
6	200 mm	Taper bush 2517	SPZ	PHP6SPZ200TB	SKF
6	200 mm	—	SPZ	ZT02006	—
6	212 mm	Taper bush 2517	SPZ	PHP6SPZ212TB	SKF
6	224 mm	Taper bush 2517	SPZ	PHP6SPZ224TB	SKF
6	224 mm	—	SPZ	ZT02246	—
6	236 mm	Taper bush 2517	SPZ	PHP6SPZ236TB	SKF
6	250 mm	Taper bush 2517	SPZ	PHP6SPZ250TB	SKF
6	280 mm	Taper bush 2517	SPZ	PHP6SPZ280TB	SKF
6	315 mm	Taper bush 2517	SPZ	PHP6SPZ315TB	SKF
6	355 mm	Taper bush 2517	SPZ	PHP6SPZ355TB	SKF
6	400 mm	Taper bush 3030	SPZ	PHP6SPZ400TB	SKF
6	400 mm	—	SPZ	ZT04006	—
6	450 mm	Taper bush 3030	SPZ	PHP6SPZ450TB	SKF
6	500 mm	Taper bush 3030	SPZ	PHP6SPZ500TB	SKF
6	630 mm	Taper bush 3535	SPZ	PHP6SPZ630TB	SKF
6	630 mm	—	SPZ	ZT06306	—
6	800 mm	Taper bush 3535	SPZ	PHP6SPZ800TB	SKF
8	140 mm	Taper bush 2517	SPZ	PHP8SPZ140TB	SKF
8	150 mm	Taper bush 2517	SPZ	PHP8SPZ150TB	SKF
8	160 mm	Taper bush 2517	SPZ	PHP8SPZ160TB	SKF
8	160 mm	—	SPZ	ZT01608	—
8	170 mm	Taper bush 2517	SPZ	PHP8SPZ170TB	SKF
8	180 mm	Taper bush 2517	SPZ	PHP8SPZ180TB	SKF
8	190 mm	Taper bush 3020	SPZ	PHP8SPZ190TB	SKF
8	200 mm	Taper bush 3020	SPZ	PHP8SPZ200TB	SKF
8	200 mm	—	SPZ	ZT02008	—
8	224 mm	Taper bush 3020	SPZ	PHP8SPZ224TB	SKF
8	250 mm	Taper bush 3020	SPZ	PHP8SPZ250TB	SKF
8	280 mm	Taper bush 3020	SPZ	PHP8SPZ280TB	SKF
8	315 mm	Taper bush 3020	SPZ	PHP8SPZ315TB	SKF
8	355 mm	Taper bush 3030	SPZ	PHP8SPZ355TB	SKF
8	355 mm	—	SPZ	ZT03558	—
8	400 mm	Taper bush 3030	SPZ	PHP8SPZ400TB	SKF
8	450 mm	Taper bush 3535	SPZ	PHP8SPZ450TB	SKF
8	500 mm	Taper bush 3535	SPZ	PHP8SPZ500TB	SKF
8	500 mm	—	SPZ	ZT05008	—
8	630 mm	Taper bush 3535	SPZ	PHP8SPZ630TB	SKF

SPA section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
1	63 mm	Taper bush 1008	SPA	PHP1SPA63TB	SKF
1	63 mm	—	SPA	AM00631	—
1	63 mm	—	SPA	AT00631	—
1	67 mm	Taper bush 1108	SPA	PHP1SPA67TB	SKF
1	71 mm	Taper bush 1108	SPA	PHP1SPA71TB	SKF
1	75 mm	Taper bush 1108	SPA	PHP1SPA75TB	SKF
1	75 mm	—	SPA	AT00751	—
1	80 mm	Taper bush 1210	SPA	PHP1SPA80TB	SKF
1	85 mm	Taper bush 1210	SPA	PHP1SPA85TB	SKF
1	90 mm	Taper bush 1210	SPA	PHP1SPA90TB	SKF
1	90 mm	—	SPA	AM00901	—
1	95 mm	Taper bush 1210	SPA	PHP1SPA95TB	SKF
1	95 mm	—	SPA	AT00951	—
1	100 mm	Taper bush 1610	SPA	PHP1SPA100TB	SKF
1	106 mm	Taper bush 1610	SPA	PHP1SPA106TB	SKF
1	112 mm	Taper bush 1610	SPA	PHP1SPA112TB	SKF
1	112 mm	—	SPA	AM01121	—
1	112 mm	—	SPA	AT01121	—
1	118 mm	Taper bush 1610	SPA	PHP1SPA118TB	SKF
1	125 mm	Taper bush 1610	SPA	PHP1SPA125TB	SKF
1	132 mm	Taper bush 1610	SPA	PHP1SPA132TB	SKF
1	132 mm	—	SPA	AM01321	—
1	140 mm	Taper bush 1610	SPA	PHP1SPA140TB	SKF
1	150 mm	Taper bush 1610	SPA	PHP1SPA150TB	SKF
1	160 mm	Taper bush 1610	SPA	PHP1SPA160TB	SKF
1	160 mm	—	SPA	AT01601	—
1	170 mm	Taper bush 1610	SPA	PHP1SPA170TB	SKF
1	170 mm	—	SPA	AT01701	—
1	180 mm	Taper bush 1610	SPA	PHP1SPA180TB	SKF
1	180 mm	—	SPA	AT01801	—
1	190 mm	Taper bush 1610	SPA	PHP1SPA190TB	SKF
1	200 mm	Taper bush 2012	SPA	PHP1SPA200TB	SKF
1	212 mm	Taper bush 2012	SPA	PHP1SPA212TB	SKF
1	224 mm	Taper bush 2012	SPA	PHP1SPA224TB	SKF
1	236 mm	Taper bush 2012	SPA	PHP1SPA236TB	SKF
1	250 mm	Taper bush 2012	SPA	PHP1SPA250TB	SKF
1	265 mm	Taper bush 2012	SPA	PHP1SPA265TB	SKF
1	280 mm	Taper bush 2012	SPA	PHP1SPA280TB	SKF
1	300 mm	Taper bush 2012	SPA	PHP1SPA300TB	SKF
1	300 mm	—	SPA	AT03001	—
1	315 mm	Taper bush 2012	SPA	PHP1SPA315TB	SKF
1	335 mm	Taper bush 2012	SPA	PHP1SPA335TB	SKF
1	355 mm	Taper bush 2012	SPA	PHP1SPA355TB	SKF
1	375 mm	Taper bush 2012	SPA	PHP1SPA375TB	SKF
1	400 mm	Taper bush 2012	SPA	PHP1SPA400TB	SKF
1	425 mm	Taper bush 2012	SPA	PHP1SPA425TB	SKF
1	450 mm	Taper bush 2012	SPA	PHP1SPA450TB	SKF
1	450 mm	—	SPA	AT04501	—
1	475 mm	Taper bush 2517	SPA	PHP1SPA475TB	SKF
1	500 mm	Taper bush 2517	SPA	PHP1SPA500TB	SKF
1	530 mm	Taper bush 2517	SPA	PHP1SPA530TB	SKF
1	560 mm	Taper bush 2517	SPA	PHP1SPA560TB	SKF
1	630 mm	Taper bush 2517	SPA	PHP1SPA630TB	SKF
2	63 mm	Taper bush 1008	SPA	PHP2SPA63TB	SKF
2	67 mm	Taper bush 1108	SPA	PHP2SPA67TB	SKF
2	71 mm	Taper bush 1108	SPA	PHP2SPA71TB	SKF
2	75 mm	Taper bush 1108	SPA	PHP2SPA75TB	SKF
2	80 mm	Taper bush 1210	SPA	PHP2SPA80TB	SKF
2	85 mm	Taper bush 1210	SPA	PHP2SPA85TB	SKF
2	85 mm	—	SPA	AT00852	—
2	90 mm	Taper bush 1610	SPA	PHP2SPA90TB	SKF
2	90 mm	—	SPA	AT00902	—
2	95 mm	Taper bush 1610	SPA	PHP2SPA95TB	SKF
2	100 mm	Taper bush 1610	SPA	PHP2SPA100TB	SKF
2	106 mm	Taper bush 1610	SPA	PHP2SPA106TB	SKF
2	112 mm	Taper bush 1610	SPA	PHP2SPA112TB	SKF
2	112 mm	—	SPA	AT01122	—
2	112 mm	—	SPA	AM01122	—
2	118 mm	Taper bush 1610	SPA	PHP2SPA118TB	SKF
2	125 mm	Taper bush 1610	SPA	PHP2SPA125TB	SKF
2	125 mm	—	SPA	AT01252	—
2	132 mm	Taper bush 2012	SPA	PHP2SPA132TB	SKF
2	132 mm	—	SPA	AT01322	—
2	140 mm	Taper bush 2012	SPA	PHP2SPA140TB	SKF
2	140 mm	—	SPA	AT01402	—
2	150 mm	Taper bush 2012	SPA	PHP2SPA150TB	SKF
2	150 mm	—	SPA	AT01502	—
2	160 mm	Taper bush 2012	SPA	PHP2SPA160TB	SKF
2	160 mm	—	SPA	AT01602	—
2	170 mm	Taper bush 2012	SPA	PHP2SPA170TB	SKF
2	170 mm	—	SPA	AT01702	—
2	180 mm	Taper bush 2012	SPA	PHP2SPA180TB	SKF
2	180 mm	—	SPA	AT01802	—
2	190 mm	Taper bush 2012	SPA	PHP2SPA190TB	SKF
2	200 mm	Taper bush 2517	SPA	PHP2SPA200TB	SKF
2	200 mm	—	SPA	AT02002	—
2	212 mm	Taper bush 2517	SPA	PHP2SPA212TB	SKF
2	224 mm	Taper bush 2517	SPA	PHP2SPA224TB	SKF
2	236 mm	Taper bush 2517	SPA	PHP2SPA236TB	SKF
2	236 mm	—	SPA	AT02362	—
2	250 mm	Taper bush 2517	SPA	PHP2SPA250TB	SKF
2	250 mm	—	SPA	AT02502	—
2	265 mm	Taper bush 2517	SPA	PHP2SPA265TB	SKF
2	280 mm	Taper bush 2517	SPA	PHP2SPA280TB	SKF
2	300 mm	Taper bush 2517	SPA	PHP2SPA300TB	SKF
2	315 mm	Taper bush 2517	SPA	PHP2SPA315TB	SKF
2	315 mm	—	SPA	AT03152	—
2	335 mm	Taper bush 2517	SPA	PHP2SPA335TB	SKF
2	355 mm	Taper bush 2517	SPA	PHP2SPA355TB	SKF
2	355 mm	—	SPA	AT03552	—
2	400 mm	Taper bush 2517	SPA	PHP2SPA400TB	SKF
2	425 mm	Taper bush 2517	SPA	PHP2SPA425TB	SKF
2	450 mm	Taper bush 2517	SPA	PHP2SPA450TB	SKF
2	475 mm	Taper bush 2517	SPA	PHP2SPA475TB	SKF
2	500 mm	Taper bush 2517	SPA	PHP2SPA500TB	SKF
2	530 mm	Taper bush 3020	SPA	PHP2SPA530TB	SKF
2	560 mm	Taper bush 3020	SPA	PHP2SPA560TB	SKF
2	630 mm	Taper bush 3020	SPA	PHP2SPA630TB	SKF
2	710 mm	Taper bush 3020	SPA	PHP2SPA710TB	SKF
2	800 mm	Taper bush 3535	SPA	PHP2SPA800TB	SKF
3	71 mm	Taper bush 1108	SPA	PHP3SPA71TB	SKF
3	75 mm	Taper bush 1108	SPA	PHP3SPA75TB	SKF
3	80 mm	Taper bush 1210	SPA	PHP3SPA80TB	SKF
3	85 mm	Taper bush 1210	SPA	PHP3SPA85TB	SKF
3	90 mm	Taper bush 1610	SPA	PHP3SPA90TB	SKF
3	95 mm	Taper bush 1610	SPA	PHP3SPA95TB	SKF
3	95 mm	—	SPA	AT00953	—
3	100 mm	Taper bush 1610	SPA	PHP3SPA100TB	SKF
3	100 mm	—	SPA	AT01003	—
3	106 mm	Taper bush 1610	SPA	PHP3SPA106TB	SKF
3	112 mm	Taper bush 2012	SPA	PHP3SPA112TB	SKF
3	118 mm	Taper bush 2012	SPA	PHP3SPA118TB	SKF
3	118 mm	—	SPA	AT01183	—
3	125 mm	Taper bush 2012	SPA	PHP3SPA125TB	SKF
3	132 mm	Taper bush 2012	SPA	PHP3SPA132TB	SKF
3	140 mm	Taper bush 2517	SPA	PHP3SPA140TB	SKF
3	140 mm	—	SPA	AT01403	—
3	150 mm	Taper bush 2517	SPA	PHP3SPA150TB	SKF
3	150 mm	—	SPA	AT01503	—
3	160 mm	Taper bush 2517	SPA	PHP3SPA160TB	SKF
3	170 mm	Taper bush 2517	SPA	PHP3SPA170TB	SKF
3	180 mm	Taper bush 2517	SPA	PHP3SPA180TB	SKF
3	190 mm	Taper bush 2517	SPA	PHP3SPA190TB	SKF
3	200 mm	Taper bush 2517	SPA	PHP3SPA200TB	SKF
3	212 mm	Taper bush 2517	SPA	PHP3SPA212TB	SKF
3	212 mm	—	SPA	AT02123	—
3	224 mm	Taper bush 2517	SPA	PHP3SPA224TB	SKF
3	236 mm	Taper bush 2517	SPA	PHP3SPA236TB	SKF
3	250 mm	Taper bush 2517	SPA	PHP3SPA250TB	SKF
3	265 mm	Taper bush 2517	SPA	PHP3SPA265TB	SKF
3	280 mm	Taper bush 2517	SPA	PHP3SPA280TB	SKF
3	300 mm	Taper bush 3020	SPA	PHP3SPA300TB	SKF
3	300 mm	—	SPA	AT03003	—
3	315 mm	Taper bush 3020	SPA	PHP3SPA315TB	SKF
3	315 mm	—	SPA	AT03153	—
3	335 mm	Taper bush 3020	SPA	PHP3SPA335TB	SKF
3	335 mm	—	SPA	AT03353	—
3	355 mm	Taper bush 3020	SPA	PHP3SPA355TB	SKF
3	375 mm	Taper bush 3020	SPA	PHP3SPA375TB	SKF
3	400 mm	Taper bush 3020	SPA	PHP3SPA400TB	SKF
3	425 mm	Taper bush 3020	SPA	PHP3SPA425TB	SKF
3	450 mm	Taper bush 3020	SPA	PHP3SPA450TB	SKF
3	450 mm	—	SPA	AT04503	—
3	475 mm	Taper bush 3020	SPA	PHP3SPA475TB	SKF
3	500 mm	Taper bush 3020	SPA	PHP3SPA500TB	SKF
3	530 mm	Taper bush 3020	SPA	PHP3SPA530TB	SKF
3	560 mm	Taper bush 3020	SPA	PHP3SPA560TB	SKF
3	630 mm	Taper bush 3020	SPA	PHP3SPA630TB	SKF
3	630 mm	—	SPA	AT06303	—
3	800 mm	Taper bush 3535	SPA	PHP3SPA800TB	SKF
3	900 mm	Taper bush 3535	SPA	PHP3SPA900TB	SKF
3	1000 mm	Taper bush 3535	SPA	PHP3SPA1000TB	SKF
3	1000 mm	—	SPA	AT10003	—
4	90 mm	Taper bush 1615	SPA	PHP4SPA90TB	SKF
4	90 mm	—	SPA	AT00904	—
4	95 mm	Taper bush 1615	SPA	PHP4SPA95TB	SKF
4	100 mm	Taper bush 1615	SPA	PHP4SPA100TB	SKF
4	100 mm	—	SPA	AT01004	—
4	106 mm	Taper bush 2012	SPA	PHP4SPA106TB	SKF
4	112 mm	Taper bush 2012	SPA	PHP4SPA112TB	SKF
4	118 mm	Taper bush 2012	SPA	PHP4SPA118TB	SKF
4	125 mm	Taper bush 2012	SPA	PHP4SPA125TB	SKF
4	125 mm	—	SPA	AT01254	—
4	132 mm	Taper bush 2517	SPA	PHP4SPA132TB	SKF
4	140 mm	Taper bush 2517	SPA	PHP4SPA140TB	SKF
4	140 mm	—	SPA	AT01404	—
4	150 mm	Taper bush 2517	SPA	PHP4SPA150TB	SKF
4	160 mm	Taper bush 2517	SPA	PHP4SPA160TB	SKF
4	160 mm	—	SPA	AT01604	—
4	170 mm	Taper bush 2517	SPA	PHP4SPA170TB	SKF
4	170 mm	—	SPA	AT01704	—
4	180 mm	Taper bush 2517	SPA	PHP4SPA180TB	SKF
4	180 mm	—	SPA	AT01804	—
4	190 mm	Taper bush 2517	SPA	PHP4SPA190TB	SKF
4	190 mm	—	SPA	AT01904	—
4	200 mm	Taper bush 3020	SPA	PHP4SPA200TB	SKF
4	212 mm	Taper bush 3020	SPA	PHP4SPA212TB	SKF
4	212 mm	—	SPA	AT02124	—
4	224 mm	Taper bush 3020	SPA	PHP4SPA224TB	SKF
4	236 mm	Taper bush 3020	SPA	PHP4SPA236TB	SKF
4	236 mm	—	SPA	AT02364	—
4	250 mm	Taper bush 3020	SPA	PHP4SPA250TB	SKF
4	265 mm	Taper bush 3020	SPA	PHP4SPA265TB	SKF
4	280 mm	Taper bush 3020	SPA	PHP4SPA280TB	SKF
4	280 mm	—	SPA	AT02804	—
4	300 mm	Taper bush 3020	SPA	PHP4SPA300TB	SKF
4	315 mm	Taper bush 3020	SPA	PHP4SPA315TB	SKF
4	335 mm	Taper bush 3020	SPA	PHP4SPA335TB	SKF
4	355 mm	Taper bush 3020	SPA	PHP4SPA355TB	SKF
4	355 mm	—	SPA	AT03554	—
4	375 mm	Taper bush 3020	SPA	PHP4SPA375TB	SKF
4	400 mm	Taper bush 3020	SPA	PHP4SPA400TB	SKF
4	400 mm	—	SPA	AT04004	—
4	425 mm	Taper bush 3020	SPA	PHP4SPA425TB	SKF
4	450 mm	Taper bush 3020	SPA	PHP4SPA450TB	SKF
4	475 mm	Taper bush 3020	SPA	PHP4SPA475TB	SKF
4	500 mm	Taper bush 3020	SPA	PHP4SPA500TB	SKF
4	560 mm	Taper bush 3535	SPA	PHP4SPA560TB	SKF
4	560 mm	—	SPA	AT05604	—
4	630 mm	Taper bush 4545	SPA	PHP4SPA630TB	SKF
4	630 mm	—	SPA	AT06304	—
4	800 mm	Taper bush 3535	SPA	PHP4SPA800TB	SKF
4	900 mm	Taper bush 3535	SPA	PHP4SPA900TB	SKF
4	1000 mm	Taper bush 4040	SPA	PHP4SPA1000TB	SKF
5	95 mm	—	SPA	AT00955	—
5	100 mm	Taper bush 1615	SPA	PHP5SPA100TB	SKF
5	100 mm	—	SPA	AT01005	—
5	106 mm	Taper bush 2012	SPA	PHP5SPA106TB	SKF
5	112 mm	Taper bush 2012	SPA	PHP5SPA112TB	SKF
5	118 mm	Taper bush 2012	SPA	PHP5SPA118TB	SKF
5	125 mm	Taper bush 2012	SPA	PHP5SPA125TB	SKF
5	125 mm	—	SPA	AT01255	—
5	132 mm	Taper bush 2517	SPA	PHP5SPA132TB	SKF
5	140 mm	Taper bush 2517	SPA	PHP5SPA140TB	SKF
5	140 mm	—	SPA	AT01405	—
5	150 mm	Taper bush 2517	SPA	PHP5SPA150TB	SKF
5	150 mm	—	SPA	AT01505	—
5	160 mm	Taper bush 2517	SPA	PHP5SPA160TB	SKF
5	170 mm	Taper bush 2517	SPA	PHP5SPA170TB	SKF
5	180 mm	Taper bush 3020	SPA	PHP5SPA180TB	SKF
5	190 mm	Taper bush 3020	SPA	PHP5SPA190TB	SKF
5	190 mm	—	SPA	AT01905	—
5	200 mm	Taper bush 3020	SPA	PHP5SPA200TB	SKF
5	200 mm	—	SPA	AT02005	—
5	212 mm	Taper bush 3020	SPA	PHP5SPA212TB	SKF
5	224 mm	Taper bush 3020	SPA	PHP5SPA224TB	SKF
5	236 mm	Taper bush 3020	SPA	PHP5SPA236TB	SKF
5	236 mm	—	SPA	AT02365	—
5	250 mm	Taper bush 3020	SPA	PHP5SPA250TB	SKF
5	265 mm	Taper bush 3020	SPA	PHP5SPA265TB	SKF
5	280 mm	Taper bush 3535	SPA	PHP5SPA280TB	SKF
5	300 mm	Taper bush 3535	SPA	PHP5SPA300TB	SKF
5	315 mm	Taper bush 3535	SPA	PHP5SPA315TB	SKF
5	315 mm	—	SPA	AT03155	—
5	335 mm	Taper bush 3535	SPA	PHP5SPA335TB	SKF
5	355 mm	Taper bush 3535	SPA	PHP5SPA355TB	SKF
5	375 mm	Taper bush 3535	SPA	PHP5SPA375TB	SKF
5	400 mm	Taper bush 3535	SPA	PHP5SPA400TB	SKF
5	400 mm	—	SPA	AT04005	—
5	425 mm	Taper bush 3535	SPA	PHP5SPA425TB	SKF
5	450 mm	Taper bush 3535	SPA	PHP5SPA450TB	SKF
5	475 mm	Taper bush 3535	SPA	PHP5SPA475TB	SKF
5	500 mm	Taper bush 3535	SPA	PHP5SPA500TB	SKF
5	530 mm	Taper bush 3535	SPA	PHP5SPA530TB	SKF
5	560 mm	Taper bush 3535	SPA	PHP5SPA560TB	SKF
5	630 mm	Taper bush 3535	SPA	PHP5SPA630TB	SKF
5	630 mm	—	SPA	AT06305	—
5	800 mm	Taper bush 4040	SPA	PHP5SPA800TB	SKF
5	900 mm	Taper bush 4040	SPA	PHP5SPA900TB	SKF
5	1000 mm	Taper bush 4545	SPA	PHP5SPA1000TB	SKF
6	100 mm	Taper bush 1610	SPA	PHP6SPA100TB	SKF
6	106 mm	Taper bush 2012	SPA	PHP6SPA106TB	SKF
6	112 mm	Taper bush 2012	SPA	PHP6SPA112TB	SKF
6	112 mm	—	SPA	AT01126	—
6	118 mm	Taper bush 2012	SPA	PHP6SPA118TB	SKF
6	125 mm	Taper bush 2012	SPA	PHP6SPA125TB	SKF
6	125 mm	—	SPA	AT01256	—
6	132 mm	Taper bush 2517	SPA	PHP6SPA132TB	SKF
6	140 mm	Taper bush 2517	SPA	PHP6SPA140TB	SKF
6	150 mm	Taper bush 2517	SPA	PHP6SPA150TB	SKF
6	150 mm	—	SPA	AT01506	—
6	160 mm	Taper bush 2517	SPA	PHP6SPA160TB	SKF
6	160 mm	—	SPA	AT01606	—
6	170 mm	—	SPA	AT01706	—
6	180 mm	Taper bush 3020	SPA	PHP6SPA180TB	SKF
6	180 mm	—	SPA	AT01806	—
6	190 mm	Taper bush 3020	SPA	PHP6SPA190TB	SKF
6	200 mm	Taper bush 3020	SPA	PHP6SPA200TB	SKF
6	212 mm	Taper bush 3020	SPA	PHP6SPA212TB	SKF
6	224 mm	Taper bush 3020	SPA	PHP6SPA224TB	SKF
6	236 mm	Taper bush 3020	SPA	PHP6SPA236TB	SKF
6	250 mm	Taper bush 3020	SPA	PHP6SPA250TB	SKF
6	265 mm	Taper bush 3535	SPA	PHP6SPA265TB	SKF
6	280 mm	Taper bush 3535	SPA	PHP6SPA280TB	SKF
6	280 mm	—	SPA	AT02806	—
6	300 mm	Taper bush 3535	SPA	PHP6SPA300TB	SKF
6	315 mm	Taper bush 3535	SPA	PHP6SPA315TB	SKF
6	335 mm	Taper bush 3535	SPA	PHP6SPA335TB	SKF
6	355 mm	Taper bush 3535	SPA	PHP6SPA355TB	SKF
6	375 mm	Taper bush 3535	SPA	PHP6SPA375TB	SKF
6	400 mm	Taper bush 3535	SPA	PHP6SPA400TB	SKF
6	425 mm	Taper bush 3535	SPA	PHP6SPA425TB	SKF
6	450 mm	Taper bush 3535	SPA	PHP6SPA450TB	SKF
6	450 mm	—	SPA	AT04506	—
6	500 mm	Taper bush 3535	SPA	PHP6SPA500TB	SKF
6	500 mm	—	SPA	AT05006	—
6	560 mm	Taper bush 3535	SPA	PHP6SPA560TB	SKF
6	630 mm	Taper bush 4040	SPA	PHP6SPA630TB	SKF
6	630 mm	—	SPA	AT06306	—
6	800 mm	Taper bush 4040	SPA	PHP6SPA800TB	SKF

SPB section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
0	200 mm	—	SPB	BT0200X	—
0	236 mm	—	SPB	BT0236X	—
0	250 mm	—	SPB	BT0250X	—
0	280 mm	—	SPB	BT0280X	—
0	315 mm	—	SPB	BT0315X	—
0	500 mm	—	SPB	BT0500X	—
0	560 mm	—	SPB	BT0560X	—
0	900 mm	—	SPB	BT0900X	—
1	80 mm	Taper bush 1108	SPB	PHP1SPB80TB	SKF
1	80 mm	—	SPB	BM00801	—
1	90 mm	—	SPB	BT00901	—
1	100 mm	Taper bush 1610	SPB	PHP1SPB100TB	SKF
1	106 mm	Taper bush 1610	SPB	PHP1SPB106TB	SKF
1	112 mm	Taper bush 1610	SPB	PHP1SPB112TB	SKF
1	112 mm	—	SPB	BM01121	—
1	112 mm	—	SPB	BT01121	—
1	118 mm	Taper bush 1610	SPB	PHP1SPB118TB	SKF
1	118 mm	—	SPB	BT01181	—
1	125 mm	Taper bush 1610	SPB	PHP1SPB125TB	SKF
1	132 mm	Taper bush 1610	SPB	PHP1SPB132TB	SKF
1	140 mm	Taper bush 1610	SPB	PHP1SPB140TB	SKF
1	150 mm	Taper bush 1610	SPB	PHP1SPB150TB	SKF
1	160 mm	Taper bush 1610	SPB	PHP1SPB160TB	SKF
1	160 mm	—	SPB	BT01601	—
1	170 mm	Taper bush 1610	SPB	PHP1SPB170TB	SKF
1	180 mm	Taper bush 1610	SPB	PHP1SPB180TB	SKF
1	190 mm	Taper bush 2012	SPB	PHP1SPB190TB	SKF
1	190 mm	—	SPB	BT01901	—
1	200 mm	Taper bush 2012	SPB	PHP1SPB200TB	SKF
1	200 mm	—	SPB	BT02001	—
1	212 mm	Taper bush 2012	SPB	PHP1SPB212TB	SKF
1	212 mm	—	SPB	BT02121	—
1	224 mm	Taper bush 2012	SPB	PHP1SPB224TB	SKF
1	236 mm	Taper bush 2012	SPB	PHP1SPB236TB	SKF
1	236 mm	—	SPB	BT02361	—
1	250 mm	Taper bush 2012	SPB	PHP1SPB250TB	SKF
1	250 mm	—	SPB	BT02501	—
1	265 mm	Taper bush 2012	SPB	PHP1SPB265TB	SKF
1	280 mm	Taper bush 2012	SPB	PHP1SPB280TB	SKF
1	300 mm	Taper bush 2012	SPB	PHP1SPB300TB	SKF
1	300 mm	—	SPB	BT03001	—
1	315 mm	Taper bush 2012	SPB	PHP1SPB315TB	SKF
1	375 mm	Taper bush 3020	SPB	PHP1SPB375TB	SKF
1	425 mm	Taper bush 3020	SPB	PHP1SPB425TB	SKF
1	475 mm	Taper bush 3020	SPB	PHP1SPB475TB	SKF
2	90 mm	Taper bush 1210	SPB	PHP2SPB90TB	SKF
2	90 mm	—	SPB	BT00902	—
2	95 mm	—	SPB	BT00952	—
2	100 mm	Taper bush 1610	SPB	PHP2SPB100TB	SKF
2	106 mm	Taper bush 1610	SPB	PHP2SPB106TB	SKF
2	112 mm	Taper bush 1610	SPB	PHP2SPB112TB	SKF
2	112 mm	—	SPB	BM01122	—
2	118 mm	Taper bush 1610	SPB	PHP2SPB118TB	SKF
2	118 mm	—	SPB	BT01182	—
2	125 mm	Taper bush 2012	SPB	PHP2SPB125TB	SKF
2	132 mm	Taper bush 2012	SPB	PHP2SPB132TB	SKF
2	132 mm	—	SPB	BT01322	—
2	140 mm	Taper bush 2012	SPB	PHP2SPB140TB	SKF
2	150 mm	Taper bush 2012	SPB	PHP2SPB150TB	SKF
2	160 mm	Taper bush 2012	SPB	PHP2SPB160TB	SKF
2	170 mm	Taper bush 2012	SPB	PHP2SPB170TB	SKF
2	170 mm	—	SPB	BT01702	—
2	180 mm	Taper bush 2517	SPB	PHP2SPB180TB	SKF
2	190 mm	Taper bush 2517	SPB	PHP2SPB190TB	SKF
2	200 mm	Taper bush 2517	SPB	PHP2SPB200TB	SKF
2	200 mm	—	SPB	BT02002	—
2	212 mm	Taper bush 2517	SPB	PHP2SPB212TB	SKF
2	224 mm	Taper bush 2517	SPB	PHP2SPB224TB	SKF
2	224 mm	—	SPB	BT02242	—
2	236 mm	Taper bush 2517	SPB	PHP2SPB236TB	SKF
2	236 mm	—	SPB	BT02362	—
2	250 mm	Taper bush 2517	SPB	PHP2SPB250TB	SKF
2	265 mm	Taper bush 2517	SPB	PHP2SPB265TB	SKF
2	265 mm	—	SPB	BT02652	—
2	280 mm	Taper bush 2517	SPB	PHP2SPB280TB	SKF
2	300 mm	Taper bush 2517	SPB	PHP2SPB300TB	SKF
2	300 mm	—	SPB	BT03002	—
2	315 mm	Taper bush 2517	SPB	PHP2SPB315TB	SKF
2	335 mm	Taper bush 2517	SPB	PHP2SPB335TB	SKF
2	355 mm	Taper bush 3020	SPB	PHP2SPB355TB	SKF
2	355 mm	—	SPB	BT03552	—
2	375 mm	Taper bush 3020	SPB	PHP2SPB375TB	SKF
2	400 mm	Taper bush 3020	SPB	PHP2SPB400TB	SKF
2	425 mm	Taper bush 3020	SPB	PHP2SPB425TB	SKF
2	450 mm	Taper bush 3020	SPB	PHP2SPB450TB	SKF
2	450 mm	—	SPB	BT04502	—
2	475 mm	Taper bush 3020	SPB	PHP2SPB475TB	SKF
2	500 mm	Taper bush 3020	SPB	PHP2SPB500TB	SKF
2	500 mm	—	SPB	BT05002	—
2	530 mm	Taper bush 3020	SPB	PHP2SPB530TB	SKF
2	560 mm	Taper bush 3030	SPB	PHP2SPB560TB	SKF
2	560 mm	—	SPB	BT05602	—
2	630 mm	Taper bush 3030	SPB	PHP2SPB630TB	SKF
2	630 mm	—	SPB	BT06302	—
2	710 mm	Taper bush 3030	SPB	PHP2SPB710TB	SKF
2	800 mm	Taper bush 3030	SPB	PHP2SPB800TB	SKF
3	90 mm	—	SPB	BT00903	—
3	95 mm	—	SPB	BT00953	—
3	100 mm	Taper bush 1610	SPB	PHP3SPB100TB	SKF
3	100 mm	—	SPB	BT01003	—
3	106 mm	Taper bush 1610	SPB	PHP3SPB106TB	SKF
3	112 mm	Taper bush 1610	SPB	PHP3SPB112TB	SKF
3	112 mm	—	SPB	BT01123	—
3	118 mm	Taper bush 1610	SPB	PHP3SPB118TB	SKF
3	125 mm	Taper bush 2012	SPB	PHP3SPB125TB	SKF
3	125 mm	—	SPB	BT01253	—
3	132 mm	Taper bush 2012	SPB	PHP3SPB132TB	SKF
3	140 mm	Taper bush 2012	SPB	PHP3SPB140TB	SKF
3	150 mm	Taper bush 2517	SPB	PHP3SPB150TB	SKF
3	150 mm	—	SPB	BT01503	—
3	160 mm	Taper bush 2517	SPB	PHP3SPB160TB	SKF
3	170 mm	Taper bush 2517	SPB	PHP3SPB170TB	SKF
3	170 mm	—	SPB	BT01703	—
3	180 mm	Taper bush 2517	SPB	PHP3SPB180TB	SKF
3	190 mm	Taper bush 2517	SPB	PHP3SPB190TB	SKF
3	190 mm	—	SPB	BT01903	—
3	200 mm	Taper bush 2517	SPB	PHP3SPB200TB	SKF
3	212 mm	Taper bush 2517	SPB	PHP3SPB212TB	SKF
3	212 mm	—	SPB	BT02123	—
3	224 mm	Taper bush 2517	SPB	PHP3SPB224TB	SKF
3	224 mm	—	SPB	BT02243	—
3	236 mm	Taper bush 2517	SPB	PHP3SPB236TB	SKF
3	250 mm	Taper bush 3020	SPB	PHP3SPB250TB	SKF
3	265 mm	Taper bush 3020	SPB	PHP3SPB265TB	SKF
3	265 mm	—	SPB	BT02653	—
3	280 mm	Taper bush 3020	SPB	PHP3SPB280TB	SKF
3	300 mm	Taper bush 3020	SPB	PHP3SPB300TB	SKF
3	315 mm	Taper bush 3020	SPB	PHP3SPB315TB	SKF
3	315 mm	—	SPB	BT03153	—
3	335 mm	Taper bush 3020	SPB	PHP3SPB335TB	SKF
3	355 mm	Taper bush 3020	SPB	PHP3SPB355TB	SKF
3	375 mm	Taper bush 3535	SPB	PHP3SPB375TB	SKF
3	400 mm	Taper bush 3535	SPB	PHP3SPB400TB	SKF
3	400 mm	—	SPB	BT04003	—
3	425 mm	Taper bush 3535	SPB	PHP3SPB425TB	SKF
3	450 mm	Taper bush 3535	SPB	PHP3SPB450TB	SKF
3	450 mm	—	SPB	BT04503	—
3	475 mm	Taper bush 3535	SPB	PHP3SPB475TB	SKF
3	500 mm	Taper bush 3535	SPB	PHP3SPB500TB	SKF
3	530 mm	Taper bush 3535	SPB	PHP3SPB530TB	SKF
3	560 mm	Taper bush 3535	SPB	PHP3SPB560TB	SKF
3	630 mm	Taper bush 3535	SPB	PHP3SPB630TB	SKF
3	710 mm	Taper bush 3535	SPB	PHP3SPB710TB	SKF
3	800 mm	Taper bush 3535	SPB	PHP3SPB800TB	SKF
3	900 mm	Taper bush 3535	SPB	PHP3SPB900TB	SKF
3	1000 mm	Taper bush 4040	SPB	PHP3SPB1000TB	SKF
3	1120 mm	Taper bush 4040	SPB	PHP3SPB1120TB	SKF
3	1250 mm	Taper bush 4040	SPB	PHP3SPB1250TB	SKF
4	100 mm	Taper bush 1210	SPB	PHP4SPB100TB	SKF
4	106 mm	Taper bush 1610	SPB	PHP4SPB106TB	SKF
4	112 mm	Taper bush 1610	SPB	PHP4SPB112TB	SKF
4	112 mm	—	SPB	BT01124	—
4	118 mm	Taper bush 1610	SPB	PHP4SPB118TB	SKF
4	125 mm	Taper bush 2012	SPB	PHP4SPB125TB	SKF
4	125 mm	—	SPB	BT01254	—
4	132 mm	Taper bush 2012	SPB	PHP4SPB132TB	SKF
4	132 mm	—	SPB	BT01324	—
4	140 mm	Taper bush 2517	SPB	PHP4SPB140TB	SKF
4	140 mm	—	SPB	BT01404	—
4	150 mm	Taper bush 2517	SPB	PHP4SPB150TB	SKF
4	150 mm	—	SPB	BT01504	—
4	160 mm	Taper bush 2517	SPB	PHP4SPB160TB	SKF
4	160 mm	—	SPB	BT01604	—
4	170 mm	Taper bush 2517	SPB	PHP4SPB170TB	SKF
4	180 mm	Taper bush 2517	SPB	PHP4SPB180TB	SKF
4	180 mm	—	SPB	BT01804	—
4	190 mm	Taper bush 2517	SPB	PHP4SPB190TB	SKF
4	190 mm	—	SPB	BT01904	—
4	200 mm	Taper bush 3020	SPB	PHP4SPB200TB	SKF
4	200 mm	—	SPB	BT02004	—
4	212 mm	Taper bush 3020	SPB	PHP4SPB212TB	SKF
4	212 mm	—	SPB	BT02124	—
4	224 mm	Taper bush 3020	SPB	PHP4SPB224TB	SKF
4	236 mm	Taper bush 3020	SPB	PHP4SPB236TB	SKF
4	236 mm	—	SPB	BT02364	—
4	250 mm	Taper bush 3020	SPB	PHP4SPB250TB	SKF
4	250 mm	—	SPB	BT02504	—
4	265 mm	Taper bush 3020	SPB	PHP4SPB265TB	SKF
4	280 mm	Taper bush 3020	SPB	PHP4SPB280TB	SKF
4	300 mm	Taper bush 3535	SPB	PHP4SPB300TB	SKF
4	300 mm	—	SPB	BT03004	—
4	315 mm	Taper bush 3535	SPB	PHP4SPB315TB	SKF
4	335 mm	Taper bush 3535	SPB	PHP4SPB335TB	SKF
4	335 mm	—	SPB	BT03354	—
4	355 mm	Taper bush 3535	SPB	PHP4SPB355TB	SKF
4	375 mm	Taper bush 3535	SPB	PHP4SPB375TB	SKF
4	400 mm	Taper bush 3535	SPB	PHP4SPB400TB	SKF
4	400 mm	—	SPB	BT04004	—
4	425 mm	Taper bush 3535	SPB	PHP4SPB425TB	SKF
4	450 mm	Taper bush 3535	SPB	PHP4SPB450TB	SKF
4	475 mm	Taper bush 3535	SPB	PHP4SPB475TB	SKF
4	500 mm	Taper bush 3535	SPB	PHP4SPB500TB	SKF
4	530 mm	Taper bush 3535	SPB	PHP4SPB530TB	SKF
4	560 mm	Taper bush 3535	SPB	PHP4SPB560TB	SKF
4	560 mm	—	SPB	BT05604	—
4	630 mm	Taper bush 3535	SPB	PHP4SPB630TB	SKF
4	710 mm	Taper bush 3535	SPB	PHP4SPB710TB	SKF
4	800 mm	Taper bush 4040	SPB	PHP4SPB800TB	SKF
4	900 mm	Taper bush 4040	SPB	PHP4SPB900TB	SKF
4	1000 mm	Taper bush 4040	SPB	PHP4SPB1000TB	SKF
4	1120 mm	Taper bush 4040	SPB	PHP4SPB1120TB	SKF
4	1250 mm	Taper bush 4545	SPB	PHP4SPB1250TB	SKF
5	100 mm	Taper bush 1615	SPB	PHP5SPB100TB	SKF
5	118 mm	Taper bush 1615	SPB	PHP5SPB118TB	SKF
5	125 mm	Taper bush 2012	SPB	PHP5SPB125TB	SKF
5	132 mm	Taper bush 2517	SPB	PHP5SPB132TB	SKF
5	140 mm	Taper bush 2517	SPB	PHP5SPB140TB	SKF
5	150 mm	Taper bush 2517	SPB	PHP5SPB150TB	SKF
5	160 mm	Taper bush 2517	SPB	PHP5SPB160TB	SKF
5	160 mm	—	SPB	BT01605	—
5	170 mm	Taper bush 3020	SPB	PHP5SPB170TB	SKF
5	180 mm	Taper bush 3020	SPB	PHP5SPB180TB	SKF
5	190 mm	Taper bush 3020	SPB	PHP5SPB190TB	SKF
5	190 mm	—	SPB	BT01905	—
5	200 mm	Taper bush 3020	SPB	PHP5SPB200TB	SKF
5	200 mm	—	SPB	BT02005	—
5	212 mm	Taper bush 3020	SPB	PHP5SPB212TB	SKF
5	212 mm	—	SPB	BT02125	—
5	224 mm	Taper bush 3020	SPB	PHP5SPB224TB	SKF
5	236 mm	Taper bush 3535	SPB	PHP5SPB236TB	SKF
5	250 mm	Taper bush 3535	SPB	PHP5SPB250TB	SKF
5	250 mm	—	SPB	BT02505	—
5	265 mm	Taper bush 3535	SPB	PHP5SPB265TB	SKF
5	280 mm	Taper bush 3535	SPB	PHP5SPB280TB	SKF
5	280 mm	—	SPB	BT02805	—
5	300 mm	Taper bush 3535	SPB	PHP5SPB300TB	SKF
5	315 mm	Taper bush 3535	SPB	PHP5SPB315TB	SKF
5	315 mm	—	SPB	BT03155	—
5	335 mm	Taper bush 3535	SPB	PHP5SPB335TB	SKF
5	355 mm	Taper bush 3535	SPB	PHP5SPB355TB	SKF
5	355 mm	—	SPB	BT03555	—
5	375 mm	Taper bush 3535	SPB	PHP5SPB375TB	SKF
5	400 mm	Taper bush 3535	SPB	PHP5SPB400TB	SKF
5	400 mm	—	SPB	BT04005	—
5	425 mm	Taper bush 3535	SPB	PHP5SPB425TB	SKF
5	450 mm	Taper bush 3535	SPB	PHP5SPB450TB	SKF
5	475 mm	Taper bush 3535	SPB	PHP5SPB475TB	SKF
5	475 mm	—	SPB	BT04755	—
5	500 mm	Taper bush 3535	SPB	PHP5SPB500TB	SKF
5	530 mm	Taper bush 3525	SPB	PHP5SPB530TB	SKF
5	560 mm	Taper bush 4040	SPB	PHP5SPB560TB	SKF
5	560 mm	—	SPB	BT05605	—
5	630 mm	Taper bush 4040	SPB	PHP5SPB630TB	SKF
5	630 mm	—	SPB	BT06305	—
5	710 mm	Taper bush 4040	SPB	PHP5SPB710TB	SKF
5	710 mm	—	SPB	BT07105	—
5	800 mm	Taper bush 4040	SPB	PHP5SPB800TB	SKF
5	900 mm	Taper bush 4040	SPB	PHP5SPB900TB	SKF
5	1000 mm	Taper bush 4545	SPB	PHP5SPB1000TB	SKF
5	1120 mm	Taper bush 4545	SPB	PHP5SPB1120TB	SKF
5	1250 mm	Taper bush 4545	SPB	PHP5SPB1250TB	SKF
5	1250 mm	—	SPB	BT12505	—
6	100 mm	Taper bush 1615	SPB	PHP6SPB100TB	SKF
6	112 mm	Taper bush 1615	SPB	PHP6SPB112TB	SKF
6	118 mm	Taper bush 1615	SPB	PHP6SPB118TB	SKF
6	125 mm	Taper bush 2012	SPB	PHP6SPB125TB	SKF
6	132 mm	Taper bush 2012	SPB	PHP6SPB132TB	SKF
6	140 mm	Taper bush 2517	SPB	PHP6SPB140TB	SKF
6	150 mm	Taper bush 2517	SPB	PHP6SPB150TB	SKF
6	150 mm	—	SPB	BT01506	—
6	160 mm	Taper bush 3020	SPB	PHP6SPB160TB	SKF
6	170 mm	Taper bush 3020	SPB	PHP6SPB170TB	SKF
6	180 mm	Taper bush 3020	SPB	PHP6SPB180TB	SKF
6	180 mm	—	SPB	BT01806	—
6	190 mm	Taper bush 3020	SPB	PHP6SPB190TB	SKF
6	200 mm	Taper bush 3020	SPB	PHP6SPB200TB	SKF
6	200 mm	—	SPB	BT02006	—
6	212 mm	Taper bush 3535	SPB	PHP6SPB212TB	SKF
6	212 mm	—	SPB	BT02126	—
6	224 mm	Taper bush 3535	SPB	PHP6SPB224TB	SKF
6	224 mm	—	SPB	BT02246	—
6	236 mm	Taper bush 3535	SPB	PHP6SPB236TB	SKF
6	250 mm	Taper bush 3535	SPB	PHP6SPB250TB	SKF
6	265 mm	Taper bush 3535	SPB	PHP6SPB265TB	SKF
6	280 mm	Taper bush 3535	SPB	PHP6SPB280TB	SKF
6	280 mm	—	SPB	BT02806	—
6	300 mm	Taper bush 3535	SPB	PHP6SPB300TB	SKF
6	315 mm	Taper bush 3535	SPB	PHP6SPB315TB	SKF
6	315 mm	—	SPB	BT03156	—
6	335 mm	Taper bush 3535	SPB	PHP6SPB335TB	SKF
6	335 mm	—	SPB	BT03356	—
6	355 mm	Taper bush 3535	SPB	PHP6SPB355TB	SKF
6	355 mm	—	SPB	BT03556	—
6	375 mm	Taper bush 3535	SPB	PHP6SPB375TB	SKF
6	400 mm	Taper bush 3535	SPB	PHP6SPB400TB	SKF
6	425 mm	Taper bush 3535	SPB	PHP6SPB425TB	SKF
6	450 mm	Taper bush 4040	SPB	PHP6SPB450TB	SKF
6	475 mm	Taper bush 4040	SPB	PHP6SPB475TB	SKF
6	500 mm	Taper bush 4040	SPB	PHP6SPB500TB	SKF
6	530 mm	Taper bush 4040	SPB	PHP6SPB530TB	SKF
6	560 mm	Taper bush 4040	SPB	PHP6SPB560TB	SKF
6	630 mm	Taper bush 4040	SPB	PHP6SPB630TB	SKF
6	710 mm	Taper bush 4040	SPB	PHP6SPB710TB	SKF
6	800 mm	Taper bush 4545	SPB	PHP6SPB800TB	SKF
6	900 mm	Taper bush 4545	SPB	PHP6SPB900TB	SKF
6	1000 mm	Taper bush 4545	SPB	PHP6SPB1000TB	SKF
6	1250 mm	Taper bush 4545	SPB	PHP6SPB1250TB	SKF
6	1250 mm	—	SPB	BT12506	—
8	140 mm	Taper bush 2517	SPB	PHP8SPB140TB	SKF
8	160 mm	Taper bush 3020	SPB	PHP8SPB160TB	SKF

SPC section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
0	250 mm	—	SPC	CT0250X	—
0	315 mm	—	SPC	CT0315X	—
0	335 mm	—	SPC	CT0335X	—
0	375 mm	—	SPC	CT0375X	—
0	400 mm	—	SPC	CT0400X	—
0	425 mm	—	SPC	CT0425X	—
0	450 mm	—	SPC	CT0450X	—
0	475 mm	—	SPC	CT0475X	—
0	630 mm	—	SPC	CT0630X	—
2	200 mm	—	SPC	CT02002	—
3	150 mm	Taper bush 2012	SPC	PHP3SPC150TB	SKF
3	200 mm	Taper bush 2517	SPC	PHP3SPC200TB	SKF
3	212 mm	Taper bush 3020	SPC	PHP3SPC212TB	SKF
3	224 mm	Taper bush 3020	SPC	PHP3SPC224TB	SKF
3	236 mm	Taper bush 3020	SPC	PHP3SPC236TB	SKF
3	236 mm	—	SPC	CT02363	—
3	250 mm	Taper bush 3020	SPC	PHP3SPC250TB	SKF
3	265 mm	Taper bush 3535	SPC	PHP3SPC265TB	SKF
3	280 mm	Taper bush 3535	SPC	PHP3SPC280TB	SKF
3	280 mm	—	SPC	CT02803	—
3	300 mm	Taper bush 3535	SPC	PHP3SPC300TB	SKF
3	300 mm	—	SPC	CT03003	—
3	315 mm	Taper bush 3535	SPC	PHP3SPC315TB	SKF
3	315 mm	—	SPC	CT03153	—
3	335 mm	Taper bush 3535	SPC	PHP3SPC335TB	SKF
3	355 mm	Taper bush 3535	SPC	PHP3SPC355TB	SKF
3	355 mm	—	SPC	CT03553	—
3	375 mm	Taper bush 3535	SPC	PHP3SPC375TB	SKF
3	400 mm	Taper bush 3535	SPC	PHP3SPC400TB	SKF
3	425 mm	Taper bush 3535	SPC	PHP3SPC425TB	SKF
3	450 mm	Taper bush 3535	SPC	PHP3SPC450TB	SKF
3	475 mm	Taper bush 3535	SPC	PHP3SPC475TB	SKF
3	500 mm	Taper bush 3535	SPC	PHP3SPC500TB	SKF
3	530 mm	Taper bush 3535	SPC	PHP3SPC530TB	SKF
3	530 mm	—	SPC	CT05303	—
3	560 mm	Taper bush 3535	SPC	PHP3SPC560TB	SKF
3	560 mm	—	SPC	CT05603	—
3	630 mm	Taper bush 4040	SPC	PHP3SPC630TB	SKF
3	710 mm	Taper bush 4040	SPC	PHP3SPC710TB	SKF
3	710 mm	—	SPC	CT07103	—
3	800 mm	Taper bush 4545	SPC	PHP3SPC800TB	SKF
3	1000 mm	Taper bush 5050	SPC	PHP3SPC1000TB	SKF
3	1250 mm	Taper bush 5050	SPC	PHP3SPC1250TB	SKF
4	180 mm	Taper bush 3020	SPC	PHP4SPC180TB	SKF
4	200 mm	Taper bush 3020	SPC	PHP4SPC200TB	SKF
4	200 mm	—	SPC	CT02004	—
4	212 mm	Taper bush 3020	SPC	PHP4SPC212TB	SKF
4	224 mm	Taper bush 3535	SPC	PHP4SPC224TB	SKF
4	236 mm	Taper bush 3535	SPC	PHP4SPC236TB	SKF
4	236 mm	—	SPC	CT02364	—
4	250 mm	Taper bush 3535	SPC	PHP4SPC250TB	SKF
4	250 mm	—	SPC	CT02504	—
4	265 mm	Taper bush 3535	SPC	PHP4SPC265TB	SKF
4	265 mm	—	SPC	CT02654	—
4	280 mm	Taper bush 3535	SPC	PHP4SPC280TB	SKF
4	300 mm	Taper bush 3535	SPC	PHP4SPC300TB	SKF
4	300 mm	—	SPC	CT03004	—
4	315 mm	Taper bush 3535	SPC	PHP4SPC315TB	SKF
4	315 mm	—	SPC	CT03154	—
4	335 mm	Taper bush 3535	SPC	PHP4SPC335TB	SKF
4	355 mm	Taper bush 3535	SPC	PHP4SPC355TB	SKF
4	355 mm	—	SPC	CT03554	—
4	375 mm	Taper bush 3535	SPC	PHP4SPC375TB	SKF
4	375 mm	—	SPC	CT03754	—
4	400 mm	Taper bush 3535	SPC	PHP4SPC400TB	SKF
4	425 mm	Taper bush 3535	SPC	PHP4SPC425TB	SKF
4	450 mm	Taper bush 3535	SPC	PHP4SPC450TB	SKF
4	450 mm	—	SPC	CT04504	—
4	475 mm	Taper bush 3535	SPC	PHP4SPC475TB	SKF
4	475 mm	—	SPC	CT04754	—
4	500 mm	Taper bush 3535	SPC	PHP4SPC500TB	SKF
4	500 mm	—	SPC	CT05004	—
4	530 mm	Taper bush 4040	SPC	PHP4SPC530TB	SKF
4	560 mm	Taper bush 4040	SPC	PHP4SPC560TB	SKF
4	630 mm	Taper bush 4545	SPC	PHP4SPC630TB	SKF
4	630 mm	—	SPC	CT06304	—
4	710 mm	Taper bush 5050	SPC	PHP4SPC710TB	SKF
4	800 mm	Taper bush 5050	SPC	PHP4SPC800TB	SKF
4	1000 mm	Taper bush 5050	SPC	PHP4SPC1000TB	SKF
4	1250 mm	Taper bush 5050	SPC	PHP4SPC1250TB	SKF
5	200 mm	Taper bush 3535	SPC	PHP5SPC200TB	SKF
5	200 mm	—	SPC	CT02005	—
5	212 mm	Taper bush 3535	SPC	PHP5SPC212TB	SKF
5	212 mm	—	SPC	CT02125	—
5	224 mm	Taper bush 3535	SPC	PHP5SPC224TB	SKF
5	236 mm	Taper bush 3535	SPC	PHP5SPC236TB	SKF
5	236 mm	—	SPC	CT02365	—
5	250 mm	Taper bush 3535	SPC	PHP5SPC250TB	SKF
5	265 mm	Taper bush 3535	SPC	PHP5SPC265TB	SKF
5	280 mm	Taper bush 3535	SPC	PHP5SPC280TB	SKF
5	300 mm	Taper bush 3535	SPC	PHP5SPC300TB	SKF
5	315 mm	Taper bush 3535	SPC	PHP5SPC315TB	SKF
5	315 mm	—	SPC	CT03155	—
5	335 mm	Taper bush 3535	SPC	PHP5SPC335TB	SKF
5	335 mm	—	SPC	CT03355	—
5	355 mm	Taper bush 3535	SPC	PHP5SPC355TB	SKF
5	355 mm	—	SPC	CT03555	—
5	375 mm	Taper bush 3535	SPC	PHP5SPC375TB	SKF
5	400 mm	Taper bush 3535	SPC	PHP5SPC400TB	SKF
5	425 mm	Taper bush 3535	SPC	PHP5SPC425TB	SKF
5	450 mm	Taper bush 4040	SPC	PHP5SPC450TB	SKF
5	475 mm	Taper bush 4040	SPC	PHP5SPC475TB	SKF
5	500 mm	Taper bush 4040	SPC	PHP5SPC500TB	SKF
5	530 mm	Taper bush 4545	SPC	PHP5SPC530TB	SKF
5	530 mm	—	SPC	CT05305	—
5	560 mm	Taper bush 4545	SPC	PHP5SPC560TB	SKF
5	630 mm	Taper bush 5050	SPC	PHP5SPC630TB	SKF
5	710 mm	Taper bush 5050	SPC	PHP5SPC710TB	SKF
5	710 mm	—	SPC	CT07105	—
5	800 mm	Taper bush 5050	SPC	PHP5SPC800TB	SKF
5	800 mm	—	SPC	CT08005	—
5	900 mm	Taper bush 5050	SPC	PHP5SPC900TB	SKF
5	1000 mm	Taper bush 5050	SPC	PHP5SPC1000TB	SKF
5	1000 mm	—	SPC	CT10005	—
5	1120 mm	Taper bush 5050	SPC	PHP5SPC1120TB	SKF
5	1250 mm	Taper bush 5050	SPC	PHP5SPC1250TB	SKF
6	200 mm	Taper bush 3535	SPC	PHP6SPC200TB	SKF
6	200 mm	—	SPC	CT02006	—
6	212 mm	Taper bush 3535	SPC	PHP6SPC212TB	SKF
6	224 mm	Taper bush 3535	SPC	PHP6SPC224TB	SKF
6	236 mm	Taper bush 3535	SPC	PHP6SPC236TB	SKF
6	250 mm	Taper bush 3535	SPC	PHP6SPC250TB	SKF
6	250 mm	—	SPC	CT02506	—
6	265 mm	Taper bush 3535	SPC	PHP6SPC265TB	SKF
6	265 mm	—	SPC	CT02656	—
6	280 mm	Taper bush 3535	SPC	PHP6SPC280TB	SKF
6	300 mm	Taper bush 3535	SPC	PHP6SPC300TB	SKF
6	300 mm	—	SPC	CT03006	—
6	315 mm	Taper bush 3535	SPC	PHP6SPC315TB	SKF
6	315 mm	—	SPC	CT03156	—
6	335 mm	Taper bush 3535	SPC	PHP6SPC335TB	SKF
6	335 mm	—	SPC	CT03356	—
6	355 mm	Taper bush 3535	SPC	PHP6SPC355TB	SKF
6	375 mm	Taper bush 4040	SPC	PHP6SPC375TB	SKF
6	400 mm	Taper bush 4040	SPC	PHP6SPC400TB	SKF
6	425 mm	Taper bush 4040	SPC	PHP6SPC425TB	SKF
6	425 mm	—	SPC	CT04256	—
6	450 mm	Taper bush 4545	SPC	PHP6SPC450TB	SKF
6	475 mm	Taper bush 4545	SPC	PHP6SPC475TB	SKF
6	500 mm	Taper bush 4545	SPC	PHP6SPC500TB	SKF
6	530 mm	Taper bush 5050	SPC	PHP6SPC530TB	SKF
6	530 mm	—	SPC	CT05306	—
6	560 mm	Taper bush 5050	SPC	PHP6SPC560TB	SKF
6	630 mm	Taper bush 5050	SPC	PHP6SPC630TB	SKF
6	710 mm	Taper bush 5050	SPC	PHP6SPC710TB	SKF
6	710 mm	—	SPC	CT07106	—
6	800 mm	Taper bush 5050	SPC	PHP6SPC800TB	SKF
6	800 mm	—	SPC	CT08006	—
6	1000 mm	Taper bush 5050	SPC	PHP6SPC1000TB	SKF
6	1120 mm	Taper bush 5050	SPC	PHP6SPC1120TB	SKF
6	1250 mm	Taper bush 5050	SPC	PHP6SPC1250TB	SKF
8	200 mm	Taper bush 3535	SPC	PHP8SPC200TB	SKF
8	200 mm	—	SPC	CT02008	—
8	212 mm	Taper bush 3535	SPC	PHP8SPC212TB	SKF
8	212 mm	—	SPC	CT02128	—
8	224 mm	Taper bush 3535	SPC	PHP8SPC224TB	SKF
8	236 mm	Taper bush 3535	SPC	PHP8SPC236TB	SKF
8	250 mm	Taper bush 3535	SPC	PHP8SPC250TB	SKF
8	265 mm	Taper bush 3535	SPC	PHP8SPC265TB	SKF
8	280 mm	Taper bush 3535	SPC	PHP8SPC280TB	SKF
8	300 mm	Taper bush 4040	SPC	PHP8SPC300TB	SKF
8	315 mm	Taper bush 4040	SPC	PHP8SPC315TB	SKF
8	315 mm	—	SPC	CT03158	—
8	335 mm	Taper bush 4040	SPC	PHP8SPC335TB	SKF
8	355 mm	Taper bush 4040	SPC	PHP8SPC355TB	SKF
8	355 mm	—	SPC	CT03558	—
8	375 mm	Taper bush 4545	SPC	PHP8SPC375TB	SKF
8	400 mm	Taper bush 4545	SPC	PHP8SPC400TB	SKF
8	400 mm	—	SPC	CT04008	—
8	425 mm	Taper bush 4545	SPC	PHP8SPC425TB	SKF
8	450 mm	Taper bush 5050	SPC	PHP8SPC450TB	SKF
8	450 mm	—	SPC	CT04508	—
8	475 mm	Taper bush 5050	SPC	PHP8SPC475TB	SKF
8	500 mm	Taper bush 5050	SPC	PHP8SPC500TB	SKF
8	530 mm	Taper bush 5050	SPC	PHP8SPC530TB	SKF
8	560 mm	Taper bush 5050	SPC	PHP8SPC560TB	SKF
8	560 mm	—	SPC	CT05608	—
8	630 mm	Taper bush 5050	SPC	PHP8SPC630TB	SKF
8	710 mm	Taper bush 5050	SPC	PHP8SPC710TB	SKF
8	800 mm	Taper bush 5050	SPC	PHP8SPC800TB	SKF
8	800 mm	—	SPC	CT08008	—
8	900 mm	Taper bush 5050	SPC	PHP8SPC900TB	SKF
8	1000 mm	Taper bush 5050	SPC	PHP8SPC1000TB	SKF
8	1000 mm	—	SPC	CT09998	—
8	1120 mm	Taper bush 5050	SPC	PHP8SPC1120TB	SKF
8	1250 mm	Taper bush 5050	SPC	PHP8SPC1250TB	SKF
10	224 mm	Taper bush 4040	SPC	PHP10SPC224TB	SKF
10	236 mm	Taper bush 4040	SPC	PHP10SPC236TB	SKF
10	250 mm	Taper bush 4040	SPC	PHP10SPC250TB	SKF
10	265 mm	Taper bush 4040	SPC	PHP10SPC265TB	SKF
10	280 mm	Taper bush 4040	SPC	PHP10SPC280TB	SKF
10	300 mm	Taper bush 4545	SPC	PHP10SPC300TB	SKF
10	315 mm	Taper bush 4545	SPC	PHP10SPC315TB	SKF
10	335 mm	Taper bush 4545	SPC	PHP10SPC335TB	SKF
10	355 mm	Taper bush 4545	SPC	PHP10SPC355TB	SKF
10	375 mm	Taper bush 4545	SPC	PHP10SPC375TB	SKF
10	400 mm	Taper bush 5050	SPC	PHP10SPC400TB	SKF
10	425 mm	Taper bush 5050	SPC	PHP10SPC425TB	SKF
10	450 mm	Taper bush 5050	SPC	PHP10SPC450TB	SKF
10	475 mm	Taper bush 5050	SPC	PHP10SPC475TB	SKF
10	500 mm	Taper bush 5050	SPC	PHP10SPC500TB	SKF
10	530 mm	Taper bush 5050	SPC	PHP10SPC530TB	SKF
10	560 mm	Taper bush 5050	SPC	PHP10SPC560TB	SKF
10	630 mm	Taper bush 5050	SPC	PHP10SPC630TB	SKF
10	710 mm	Taper bush 5050	SPC	PHP10SPC710TB	SKF
10	800 mm	Taper bush 5050	SPC	PHP10SPC800TB	SKF
10	900 mm	Taper bush 5050	SPC	PHP10SPC900TB	SKF
10	1000 mm	Taper bush 5050	SPC	PHP10SPC1000TB	SKF
10	1250 mm	Taper bush 5050	SPC	PHP10SPC1250TB	SKF
10	1600 mm	Taper bush 5050	SPC	PHP10SPC1600TB	SKF
12	265 mm	Taper bush 4545	SPC	PHP12SPC265TB	SKF
12	300 mm	Taper bush 4545	SPC	PHP12SPC300TB	SKF
12	315 mm	Taper bush 5050	SPC	PHP12SPC315TB	SKF
12	335 mm	Taper bush 5050	SPC	PHP12SPC335TB	SKF
12	355 mm	Taper bush 5050	SPC	PHP12SPC355TB	SKF
12	375 mm	Taper bush 5050	SPC	PHP12SPC375TB	SKF
12	400 mm	Taper bush 5050	SPC	PHP12SPC400TB	SKF
12	1000 mm	Taper bush 5050	SPC	PHP12SPC1000TB	SKF

C section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
1	177.8 mm	QD bush SF	C	PHP1-C70-SF	SKF
1	190.5 mm	QD bush SF	C	PHP1-C75-SF	SKF
1	203.2 mm	QD bush SF	C	PHP1-C80-SF	SKF
1	215.9 mm	QD bush SF	C	PHP1-C85-SF	SKF
1	228.6 mm	QD bush SF	C	PHP1-C90-SF	SKF
1	241.3 mm	QD bush SF	C	PHP1-C95-SF	SKF
1	254 mm	QD bush SF	C	PHP1-C100-SF	SKF
1	266.7 mm	QD bush SF	C	PHP1-C105-SF	SKF
1	279.4 mm	QD bush SF	C	PHP1-C110-SF	SKF
1	304.8 mm	QD bush SF	C	PHP1-C120-SF	SKF
1	330.2 mm	QD bush SF	C	PHP1-C130-SF	SKF
1	355.6 mm	QD bush SF	C	PHP1-C140-SF	SKF
1	406.4 mm	QD bush SF	C	PHP1-C160-SF	SKF
1	457.2 mm	QD bush SF	C	PHP1-C180-SF	SKF
1	508 mm	QD bush SF	C	PHP1-C200-SF	SKF
1	609.6 mm	QD bush SF	C	PHP1-C240-SF	SKF
2	177.8 mm	QD bush SF	C	PHP2-C70-SF	SKF
2	177.8 mm	Taper bush 2517	C	PHP2-C70TB	SKF
2	190.5 mm	QD bush SF	C	PHP2-C75-SF	SKF
2	190.5 mm	Taper bush 2517	C	PHP2-C75TB	SKF
2	203.2 mm	QD bush SF	C	PHP2-C80-SF	SKF
2	203.2 mm	Taper bush 2517	C	PHP2-C80TB	SKF
2	215.9 mm	QD bush SF	C	PHP2-C85-SF	SKF
2	215.9 mm	Taper bush 2517	C	PHP2-C85TB	SKF
2	228.6 mm	QD bush SF	C	PHP2-C90-SF	SKF
2	228.6 mm	Taper bush 2517	C	PHP2-C90TB	SKF
2	241.3 mm	QD bush SF	C	PHP2-C95-SF	SKF
2	241.3 mm	Taper bush 2517	C	PHP2-C95TB	SKF
2	254 mm	QD bush SF	C	PHP2-C100-SF	SKF
2	254 mm	Taper bush 2517	C	PHP2-C100TB	SKF
2	266.7 mm	QD bush SF	C	PHP2-C105-SF	SKF
2	266.7 mm	Taper bush 2517	C	PHP2-C105TB	SKF
2	279.4 mm	QD bush SF	C	PHP2-C110-SF	SKF
2	279.4 mm	Taper bush 2517	C	PHP2-C110TB	SKF
2	304.8 mm	QD bush SF	C	PHP2-C120-SF	SKF
2	304.8 mm	Taper bush 2517	C	PHP2-C120TB	SKF
2	330.2 mm	QD bush SF	C	PHP2-C130-SF	SKF
2	330.2 mm	Taper bush 2517	C	PHP2-C130TB	SKF
2	355.6 mm	QD bush SF	C	PHP2-C140-SF	SKF
2	355.6 mm	Taper bush 2517	C	PHP2-C140TB	SKF
2	406.4 mm	QD bush SF	C	PHP2-C160-SF	SKF
2	406.4 mm	Taper bush 2517	C	PHP2-C160TB	SKF
2	457.2 mm	QD bush SF	C	PHP2-C180-SF	SKF
2	457.2 mm	Taper bush 3020	C	PHP2-C180TB	SKF
2	508 mm	QD bush SF	C	PHP2-C200-SF	SKF
2	508 mm	Taper bush 3020	C	PHP2-C200TB	SKF
2	609.6 mm	QD bush SF	C	PHP2-C240-SF	SKF
2	609.6 mm	Taper bush 3020	C	PHP2-C240TB	SKF
2	762 mm	QD bush F	C	PHP2-C300-F	SKF
3	127 mm	QD bush SD	C	PHP3-C50-SD	SKF
3	139.7 mm	QD bush SD	C	PHP3-C55-SD	SKF
3	152.4 mm	QD bush SF	C	PHP3-C60-SF	SKF
3	177.8 mm	QD bush SF	C	PHP3-C70-SF	SKF
3	177.8 mm	Taper bush 2517	C	PHP3-C70TB	SKF
3	190.5 mm	QD bush SF	C	PHP3-C75-SF	SKF
3	190.5 mm	Taper bush 2517	C	PHP3-C75TB	SKF
3	203.2 mm	QD bush E	C	PHP3-C80-E	SKF
3	203.2 mm	Taper bush 2517	C	PHP3-C80TB	SKF
3	215.9 mm	QD bush E	C	PHP3-C85-E	SKF
3	215.9 mm	Taper bush 2517	C	PHP3-C85TB	SKF
3	228.6 mm	QD bush E	C	PHP3-C90-E	SKF
3	228.6 mm	Taper bush 2517	C	PHP3-C90TB	SKF
3	241.3 mm	QD bush E	C	PHP3-C95-E	SKF
3	241.3 mm	Taper bush 2517	C	PHP3-C95TB	SKF
3	254 mm	QD bush E	C	PHP3-C100-E	SKF
3	254 mm	Taper bush 2517	C	PHP3-C100TB	SKF
3	266.7 mm	QD bush E	C	PHP3-C105-E	SKF
3	266.7 mm	Taper bush 2517	C	PHP3-C105TB	SKF
3	279.4 mm	QD bush E	C	PHP3-C110-E	SKF
3	279.4 mm	Taper bush 2517	C	PHP3-C110TB	SKF
3	304.8 mm	QD bush E	C	PHP3-C120-E	SKF
3	304.8 mm	Taper bush 3020	C	PHP3-C120TB	SKF
3	330.2 mm	QD bush E	C	PHP3-C130-E	SKF
3	330.2 mm	Taper bush 3020	C	PHP3-C130TB	SKF
3	355.6 mm	QD bush E	C	PHP3-C140-E	SKF
3	355.6 mm	Taper bush 3020	C	PHP3-C140TB	SKF
3	406.4 mm	QD bush E	C	PHP3-C160-E	SKF
3	406.4 mm	Taper bush 3020	C	PHP3-C160TB	SKF
3	457.2 mm	QD bush E	C	PHP3-C180-E	SKF
3	457.2 mm	Taper bush 3030	C	PHP3-C180TB	SKF
3	508 mm	QD bush E	C	PHP3-C200-E	SKF
3	508 mm	Taper bush 3030	C	PHP3-C200TB	SKF
3	609.6 mm	QD bush E	C	PHP3-C240-E	SKF
3	609.6 mm	Taper bush 3030	C	PHP3-C240TB	SKF
3	685.8 mm	QD bush F	C	PHP3-C270-F	SKF
3	762 mm	QD bush F	C	PHP3-C300-F	SKF
3	762 mm	Taper bush 3535	C	PHP3-C300TB	SKF
3	914.4 mm	QD bush F	C	PHP3-C360-F	SKF
3	914.4 mm	Taper bush 3535	C	PHP3-C360TB	SKF
3	1117.6 mm	QD bush F	C	PHP3-C440-F	SKF
3	1270 mm	QD bush F	C	PHP3-C500-F	SKF
4	127 mm	QD bush SD	C	PHP4-C50-SD	SKF
4	139.7 mm	QD bush SD	C	PHP4-C55-SD	SKF
4	152.4 mm	QD bush SF	C	PHP4-C60-SF	SKF
4	177.8 mm	QD bush SF	C	PHP4-C70-SF	SKF
4	177.8 mm	Taper bush 2517	C	PHP4-C70TB	SKF
4	190.5 mm	QD bush SF	C	PHP4-C75-SF	SKF
4	190.5 mm	Taper bush 2517	C	PHP4-C75TB	SKF
4	203.2 mm	QD bush E	C	PHP4-C80-E	SKF
4	203.2 mm	Taper bush 2517	C	PHP4-C80TB	SKF
4	215.9 mm	QD bush E	C	PHP4-C85-E	SKF
4	215.9 mm	Taper bush 2517	C	PHP4-C85TB	SKF
4	228.6 mm	QD bush E	C	PHP4-C90-E	SKF
4	228.6 mm	Taper bush 2517	C	PHP4-C90TB	SKF
4	241.3 mm	QD bush E	C	PHP4-C95-E	SKF
4	241.3 mm	Taper bush 2517	C	PHP4-C95TB	SKF
4	254 mm	QD bush E	C	PHP4-C100-E	SKF
4	254 mm	Taper bush 2517	C	PHP4-C100TB	SKF
4	266.7 mm	QD bush E	C	PHP4-C105-E	SKF
4	266.7 mm	Taper bush 2517	C	PHP4-C105TB	SKF
4	279.4 mm	QD bush E	C	PHP4-C110-E	SKF
4	279.4 mm	Taper bush 2517	C	PHP4-C110TB	SKF
4	304.8 mm	QD bush E	C	PHP4-C120-E	SKF
4	304.8 mm	Taper bush 2517	C	PHP4-C120TB	SKF
4	330.2 mm	QD bush E	C	PHP4-C130-E	SKF
4	330.2 mm	Taper bush 3030	C	PHP4-C130TB	SKF
4	355.6 mm	QD bush E	C	PHP4-C140-E	SKF
4	355.6 mm	Taper bush 3030	C	PHP4-C140TB	SKF
4	406.4 mm	QD bush E	C	PHP4-C160-E	SKF
4	406.4 mm	Taper bush 3030	C	PHP4-C160TB	SKF
4	457.2 mm	QD bush E	C	PHP4-C180-E	SKF
4	457.2 mm	Taper bush 3030	C	PHP4-C180TB	SKF
4	508 mm	QD bush E	C	PHP4-C200-E	SKF
4	508 mm	Taper bush 3030	C	PHP4-C200TB	SKF
4	609.6 mm	QD bush F	C	PHP4-C240-F	SKF
4	609.6 mm	Taper bush 3030	C	PHP4-C240TB	SKF
4	685.8 mm	QD bush F	C	PHP4-C270-F	SKF
4	762 mm	QD bush F	C	PHP4-C300-F	SKF
4	762 mm	Taper bush 3535	C	PHP4-C300TB	SKF
4	914.4 mm	QD bush F	C	PHP4-C360-F	SKF
4	914.4 mm	Taper bush 3535	C	PHP4-C360TB	SKF
4	1117.6 mm	QD bush J	C	PHP4-C440-J	SKF
4	1117.6 mm	Taper bush 4040	C	PHP4-C440TB	SKF
4	1270 mm	QD bush J	C	PHP4-C500-J	SKF
5	152.4 mm	QD bush SF	C	PHP5-C60-SF	SKF
5	177.8 mm	QD bush SF	C	PHP5-C70-SF	SKF
5	177.8 mm	Taper bush 2517	C	PHP5-C70TB	SKF
5	190.5 mm	QD bush SF	C	PHP5-C75-SF	SKF
5	190.5 mm	Taper bush 2517	C	PHP5-C75TB	SKF
5	203.2 mm	QD bush E	C	PHP5-C80-E	SKF
5	203.2 mm	Taper bush 2517	C	PHP5-C80TB	SKF
5	215.9 mm	QD bush E	C	PHP5-C85-E	SKF
5	215.9 mm	Taper bush 2517	C	PHP5-C85TB	SKF
5	228.6 mm	QD bush E	C	PHP5-C90-E	SKF
5	228.6 mm	Taper bush 2517	C	PHP5-C90TB	SKF
5	241.3 mm	QD bush E	C	PHP5-C95-E	SKF
5	241.3 mm	Taper bush 2517	C	PHP5-C95TB	SKF
5	254 mm	QD bush E	C	PHP5-C100-E	SKF
5	254 mm	Taper bush 2517	C	PHP5-C100TB	SKF
5	266.7 mm	QD bush E	C	PHP5-C105-E	SKF
5	266.7 mm	Taper bush 2517	C	PHP5-C105TB	SKF
5	279.4 mm	QD bush E	C	PHP5-C110-E	SKF
5	279.4 mm	Taper bush 2517	C	PHP5-C110TB	SKF
5	304.8 mm	QD bush E	C	PHP5-C120-E	SKF
5	304.8 mm	Taper bush 3030	C	PHP5-C120TB	SKF
5	330.2 mm	QD bush E	C	PHP5-C130-E	SKF
5	330.2 mm	Taper bush 3030	C	PHP5-C130TB	SKF
5	355.6 mm	QD bush E	C	PHP5-C140-E	SKF
5	355.6 mm	Taper bush 3030	C	PHP5-C140TB	SKF
5	406.4 mm	QD bush E	C	PHP5-C160-E	SKF
5	406.4 mm	Taper bush 3030	C	PHP5-C160TB	SKF
5	457.2 mm	QD bush E	C	PHP5-C180-E	SKF
5	457.2 mm	Taper bush 3030	C	PHP5-C180TB	SKF
5	508 mm	QD bush F	C	PHP5-C200-F	SKF
5	508 mm	Taper bush 3535	C	PHP5-C200TB	SKF
5	609.6 mm	QD bush F	C	PHP5-C240-F	SKF
5	609.6 mm	Taper bush 3535	C	PHP5-C240TB	SKF
5	685.8 mm	QD bush F	C	PHP5-C270-F	SKF
5	762 mm	QD bush F	C	PHP5-C300-F	SKF
5	762 mm	Taper bush 3535	C	PHP5-C300TB	SKF
5	914.4 mm	QD bush J	C	PHP5-C360-J	SKF
5	914.4 mm	Taper bush 4040	C	PHP5-C360TB	SKF
5	1117.6 mm	QD bush J	C	PHP5-C440-J	SKF
5	1117.6 mm	Taper bush 4040	C	PHP5-C440TB	SKF
5	1270 mm	QD bush J	C	PHP5-C500-J	SKF
6	152.4 mm	QD bush SF	C	PHP6-C60-SF	SKF
6	177.8 mm	QD bush SF	C	PHP6-C70-SF	SKF
6	177.8 mm	Taper bush 3030	C	PHP6-C70TB	SKF
6	190.5 mm	QD bush SF	C	PHP6-C75-SF	SKF
6	190.5 mm	Taper bush 3030	C	PHP6-C75TB	SKF
6	203.2 mm	QD bush E	C	PHP6-C80-E	SKF
6	203.2 mm	Taper bush 3030	C	PHP6-C80TB	SKF
6	215.9 mm	QD bush E	C	PHP6-C85-E	SKF
6	215.9 mm	Taper bush 3030	C	PHP6-C85TB	SKF
6	228.6 mm	QD bush F	C	PHP6-C90-F	SKF
6	228.6 mm	Taper bush 3030	C	PHP6-C90TB	SKF
6	241.3 mm	QD bush F	C	PHP6-C95-F	SKF
6	241.3 mm	Taper bush 3030	C	PHP6-C95TB	SKF
6	254 mm	QD bush F	C	PHP6-C100-F	SKF
6	254 mm	Taper bush 3030	C	PHP6-C100TB	SKF
6	266.7 mm	QD bush F	C	PHP6-C105-F	SKF
6	266.7 mm	Taper bush 3030	C	PHP6-C105TB	SKF
6	279.4 mm	QD bush F	C	PHP6-C110-F	SKF
6	279.4 mm	Taper bush 3030	C	PHP6-C110TB	SKF
6	304.8 mm	QD bush F	C	PHP6-C120-F	SKF
6	304.8 mm	Taper bush 3030	C	PHP6-C120TB	SKF
6	330.2 mm	QD bush F	C	PHP6-C130-F	SKF
6	330.2 mm	Taper bush 3030	C	PHP6-C130TB	SKF
6	355.6 mm	QD bush F	C	PHP6-C140-F	SKF
6	355.6 mm	Taper bush 3535	C	PHP6-C140TB	SKF
6	406.4 mm	QD bush F	C	PHP6-C160-F	SKF
6	406.4 mm	Taper bush 3535	C	PHP6-C160TB	SKF
6	457.2 mm	QD bush F	C	PHP6-C180-F	SKF
6	457.2 mm	Taper bush 3535	C	PHP6-C180TB	SKF
6	508 mm	QD bush F	C	PHP6-C200-F	SKF
6	508 mm	Taper bush 3535	C	PHP6-C200TB	SKF
6	609.6 mm	QD bush F	C	PHP6-C240-F	SKF
6	609.6 mm	Taper bush 3535	C	PHP6-C240TB	SKF
6	685.8 mm	QD bush J	C	PHP6-C270-J	SKF
6	762 mm	QD bush J	C	PHP6-C300-J	SKF
6	762 mm	Taper bush 4040	C	PHP6-C300TB	SKF
6	914.4 mm	QD bush J	C	PHP6-C360-J	SKF
6	914.4 mm	Taper bush 4040	C	PHP6-C360TB	SKF
6	1117.6 mm	QD bush J	C	PHP6-C440-J	SKF
6	1117.6 mm	Taper bush 4040	C	PHP6-C440TB	SKF
6	1270 mm	QD bush M	C	PHP6-C500-M	SKF
8	203.2 mm	QD bush E	C	PHP8-C80-E	SKF
8	203.2 mm	Taper bush 3030	C	PHP8-C80TB	SKF
8	215.9 mm	QD bush E	C	PHP8-C85-E	SKF
8	215.9 mm	Taper bush 3030	C	PHP8-C85TB	SKF
8	228.6 mm	QD bush F	C	PHP8-C90-F	SKF
8	228.6 mm	Taper bush 3535	C	PHP8-C90TB	SKF
8	241.3 mm	QD bush F	C	PHP8-C95-F	SKF
8	241.3 mm	Taper bush 3535	C	PHP8-C95TB	SKF
8	254 mm	QD bush F	C	PHP8-C100-F	SKF
8	254 mm	Taper bush 3535	C	PHP8-C100TB	SKF
8	266.7 mm	QD bush F	C	PHP8-C105-F	SKF
8	266.7 mm	Taper bush 3535	C	PHP8-C105TB	SKF
8	279.4 mm	QD bush F	C	PHP8-C110-F	SKF
8	279.4 mm	Taper bush 3535	C	PHP8-C110TB	SKF
8	304.8 mm	QD bush F	C	PHP8-C120-F	SKF
8	304.8 mm	Taper bush 3535	C	PHP8-C120TB	SKF
8	330.2 mm	QD bush F	C	PHP8-C130-F	SKF
8	330.2 mm	Taper bush 3535	C	PHP8-C130TB	SKF
8	355.6 mm	QD bush F	C	PHP8-C140-F	SKF
8	355.6 mm	Taper bush 3535	C	PHP8-C140TB	SKF
8	406.4 mm	QD bush F	C	PHP8-C160-F	SKF
8	406.4 mm	Taper bush 3535	C	PHP8-C160TB	SKF
8	457.2 mm	QD bush F	C	PHP8-C180-F	SKF
8	457.2 mm	Taper bush 4040	C	PHP8-C180TB	SKF
8	508 mm	QD bush J	C	PHP8-C200-J	SKF
8	508 mm	Taper bush 4040	C	PHP8-C200TB	SKF
8	609.6 mm	QD bush J	C	PHP8-C240-J	SKF
8	609.6 mm	Taper bush 4040	C	PHP8-C240TB	SKF
8	685.8 mm	QD bush J	C	PHP8-C270-J	SKF
8	762 mm	QD bush J	C	PHP8-C300-J	SKF
8	762 mm	Taper bush 4040	C	PHP8-C300TB	SKF
8	914.4 mm	QD bush M	C	PHP8-C360-M	SKF
8	914.4 mm	Taper bush 4545	C	PHP8-C360TB	SKF
8	1117.6 mm	QD bush M	C	PHP8-C440-M	SKF
8	1117.6 mm	Taper bush 4545	C	PHP8-C440TB	SKF
8	1270 mm	QD bush M	C	PHP8-C500-M	SKF

D section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
4	304.8 mm	Taper bush 3535 (1)	D	PHP4-D120TB	SKF
4	330.2 mm	Taper bush 3535 (1)	D	PHP4-D130TB	SKF
4	457.2 mm	Taper bush 3535 (1)	D	PHP4-D180TB	SKF
5	342.9 mm	Taper bush 4040	D	PHP5-D135TB	SKF
5	355.6 mm	Taper bush 4040	D	PHP5-D140TB	SKF
5	368.3 mm	Taper bush 4040	D	PHP5-D145TB	SKF
5	381 mm	QD bush F	D	PHP5-D150-F	SKF
5	381 mm	Taper bush 4040	D	PHP5-D150TB	SKF
5	457.2 mm	QD bush J	D	PHP5-D180-J	SKF
6	342.9 mm	Taper bush 4040	D	PHP6-D135TB	SKF
6	558.8 mm	QD bush M	D	PHP6-D220-M	SKF
6	685.8 mm	Taper bush 4545	D	PHP6-D270TB	SKF
8	304.8 mm	QD bush J	D	PHP8-D120-J	SKF
8	304.8 mm	Taper bush 4545	D	PHP8-D120TB	SKF
8	381 mm	Taper bush 4545	D	PHP8-D150TB	SKF
8	393.7 mm	Taper bush 4545	D	PHP8-D155TB	SKF
8	685.8 mm	Taper bush 4545	D	PHP8-D270TB	SKF

3V section

Grooves	Pitch diameter	Bore / mounting	Section	Part number	Brand
1	54.61 mm	QD bush JA	3V	PHP1-3V220-JA	SKF
1	58.42 mm	QD bush JA	3V	PHP1-3V235-JA	SKF
1	62.23 mm	QD bush JA	3V	PHP1-3V250-JA	SKF
1	66.04 mm	QD bush JA	3V	PHP1-3V265-JA	SKF
1	66.04 mm	Taper bush 1108	3V	PHP1-3V265TB	SKF
1	69.85 mm	QD bush JA	3V	PHP1-3V280-JA	SKF
1	69.85 mm	Taper bush 1108	3V	PHP1-3V280TB	SKF
1	74.93 mm	QD bush JA	3V	PHP1-3V300-JA	SKF
1	74.93 mm	Taper bush 1108	3V	PHP1-3V300TB	SKF
1	78.74 mm	QD bush JA	3V	PHP1-3V315-JA	SKF
1	78.74 mm	Taper bush 1108	3V	PHP1-3V315TB	SKF
1	83.82 mm	QD bush JA	3V	PHP1-3V335-JA	SKF
1	83.82 mm	Taper bush 1610	3V	PHP1-3V335TB	SKF
1	91.44 mm	QD bush SH	3V	PHP1-3V365-SH	SKF
1	91.44 mm	Taper bush 1610	3V	PHP1-3V365TB	SKF
1	103.38 mm	QD bush SH	3V	PHP1-3V412-SH	SKF
1	103.38 mm	Taper bush 1610	3V	PHP1-3V412TB	SKF
1	113.03 mm	QD bush SH	3V	PHP1-3V450-SH	SKF
1	113.03 mm	Taper bush 1610	3V	PHP1-3V450TB	SKF
1	125.73 mm	QD bush SH	3V	PHP1-3V500-SH	SKF
1	125.73 mm	Taper bush 1610	3V	PHP1-3V500TB	SKF
1	133.35 mm	QD bush SH	3V	PHP1-3V530-SH	SKF
1	133.35 mm	Taper bush 1610	3V	PHP1-3V530TB	SKF
1	140.97 mm	QD bush SH	3V	PHP1-3V560-SH	SKF
1	140.97 mm	Taper bush 1610	3V	PHP1-3V560TB	SKF
1	151.13 mm	QD bush SH	3V	PHP1-3V600-SH	SKF
1	151.13 mm	Taper bush 1610	3V	PHP1-3V600TB	SKF
1	163.83 mm	QD bush SH	3V	PHP1-3V650-SH	SKF
1	163.83 mm	Taper bush 1610	3V	PHP1-3V650TB	SKF
1	173.99 mm	QD bush SH	3V	PHP1-3V690-SH	SKF
1	173.99 mm	Taper bush 1610	3V	PHP1-3V690TB	SKF
1	201.93 mm	QD bush SDS	3V	PHP1-3V800-SDS	SKF
1	201.93 mm	Taper bush 2517	3V	PHP1-3V800TB	SKF
1	267.97 mm	QD bush SDS	3V	PHP1-3V1060-SDS	SKF
1	267.97 mm	Taper bush 2517	3V	PHP1-3V1060TB	SKF
1	354.33 mm	QD bush SK	3V	PHP1-3V1400-SK	SKF
1	354.33 mm	Taper bush 2517	3V	PHP1-3V1400TB	SKF
1	481.33 mm	QD bush SK	3V	PHP1-3V1900-SK	SKF
1	481.33 mm	Taper bush 3020	3V	PHP1-3V1900TB	SKF
2	54.61 mm	QD bush JA	3V	PHP2-3V220-JA	SKF
2	58.42 mm	QD bush JA	3V	PHP2-3V235-JA	SKF
2	62.23 mm	QD bush JA	3V	PHP2-3V250-JA	SKF
2	66.04 mm	QD bush JA	3V	PHP2-3V265-JA	SKF
2	66.04 mm	Taper bush 1108	3V	PHP2-3V265TB	SKF
2	69.85 mm	QD bush JA	3V	PHP2-3V280-JA	SKF
2	69.85 mm	Taper bush 1108	3V	PHP2-3V280TB	SKF
2	74.93 mm	QD bush JA	3V	PHP2-3V300-JA	SKF
2	74.93 mm	Taper bush 1210	3V	PHP2-3V300TB	SKF
2	78.74 mm	QD bush JA	3V	PHP2-3V315-JA	SKF
2	78.74 mm	Taper bush 1210	3V	PHP2-3V315TB	SKF
2	83.82 mm	QD bush SH	3V	PHP2-3V335-SH	SKF
2	83.82 mm	Taper bush 1610	3V	PHP2-3V335TB	SKF
2	91.44 mm	QD bush SH	3V	PHP2-3V365-SH	SKF
2	91.44 mm	Taper bush 1610	3V	PHP2-3V365TB	SKF
2	103.38 mm	QD bush SH	3V	PHP2-3V412-SH	SKF
2	103.38 mm	Taper bush 1610	3V	PHP2-3V412TB	SKF
2	113.03 mm	QD bush SH	3V	PHP2-3V450-SH	SKF
2	113.03 mm	Taper bush 1610	3V	PHP2-3V450TB	SKF
2	119.38 mm	QD bush SH	3V	PHP2-3V475-SH	SKF
2	119.38 mm	Taper bush 1610	3V	PHP2-3V475TB	SKF
2	125.73 mm	QD bush SH	3V	PHP2-3V500-SH	SKF
2	125.73 mm	Taper bush 1610	3V	PHP2-3V500TB	SKF
2	133.35 mm	QD bush SH	3V	PHP2-3V530-SH	SKF
2	133.35 mm	Taper bush 1610	3V	PHP2-3V530TB	SKF
2	140.97 mm	QD bush SH	3V	PHP2-3V560-SH	SKF
2	140.97 mm	Taper bush 1610	3V	PHP2-3V560TB	SKF
2	151.13 mm	QD bush SH	3V	PHP2-3V600-SH	SKF
2	151.13 mm	Taper bush 1610	3V	PHP2-3V600TB	SKF
2	163.83 mm	QD bush SDS	3V	PHP2-3V650-SDS	SKF
2	163.83 mm	Taper bush 1610	3V	PHP2-3V650TB	SKF
2	173.99 mm	QD bush SDS	3V	PHP2-3V690-SDS	SKF
2	173.99 mm	Taper bush 1610	3V	PHP2-3V690TB	SKF
2	201.93 mm	QD bush SDS	3V	PHP2-3V800-SDS	SKF
2	201.93 mm	Taper bush 2517	3V	PHP2-3V800TB	SKF
2	267.97 mm	QD bush SK	3V	PHP2-3V1060-SK	SKF
2	267.97 mm	Taper bush 2517	3V	PHP2-3V1060TB	SKF
2	354.33 mm	QD bush SK	3V	PHP2-3V1400-SK	SKF
2	354.33 mm	Taper bush 2517	3V	PHP2-3V1400TB	SKF
2	481.33 mm	QD bush SK	3V	PHP2-3V1900-SK	SKF
2	481.33 mm	Taper bush 3020	3V	PHP2-3V1900TB	SKF
2	633.73 mm	QD bush SF	3V	PHP2-3V2500-SF	SKF
2	633.73 mm	Taper bush 3020	3V	PHP2-3V2500TB	SKF
3	62.23 mm	QD bush JA	3V	PHP3-3V250-JA	SKF
3	66.04 mm	QD bush JA	3V	PHP3-3V265-JA	SKF
3	69.85 mm	QD bush JA	3V	PHP3-3V280-JA	SKF
3	69.85 mm	Taper bush 1108	3V	PHP3-3V280TB	SKF
3	74.93 mm	QD bush SH	3V	PHP3-3V300-SH	SKF
3	74.93 mm	Taper bush 1210	3V	PHP3-3V300TB	SKF
3	78.74 mm	QD bush SH	3V	PHP3-3V315-SH	SKF
3	78.74 mm	Taper bush 1210	3V	PHP3-3V315TB	SKF
3	83.82 mm	QD bush SH	3V	PHP3-3V335-SH	SKF
3	83.82 mm	Taper bush 1610	3V	PHP3-3V335TB	SKF
3	91.44 mm	QD bush SH	3V	PHP3-3V365-SH	SKF
3	91.44 mm	Taper bush 1610	3V	PHP3-3V365TB	SKF
3	103.38 mm	QD bush SH	3V	PHP3-3V412-SH	SKF
3	103.38 mm	Taper bush 1610	3V	PHP3-3V412TB	SKF
3	113.03 mm	QD bush SDS	3V	PHP3-3V450-SDS	SKF
3	113.03 mm	Taper bush 1610	3V	PHP3-3V450TB	SKF
3	119.38 mm	QD bush SDS	3V	PHP3-3V475-SDS	SKF
3	119.38 mm	Taper bush 1610	3V	PHP3-3V475TB	SKF
3	125.73 mm	QD bush SDS	3V	PHP3-3V500-SDS	SKF
3	125.73 mm	Taper bush 1610	3V	PHP3-3V500TB	SKF
3	133.35 mm	QD bush SDS	3V	PHP3-3V530-SDS	SKF
3	133.35 mm	Taper bush 1610	3V	PHP3-3V530TB	SKF
3	140.97 mm	QD bush SDS	3V	PHP3-3V560-SDS	SKF
3	140.97 mm	Taper bush 1610	3V	PHP3-3V560TB	SKF
3	151.13 mm	QD bush SDS	3V	PHP3-3V600-SDS	SKF
3	151.13 mm	Taper bush 2517	3V	PHP3-3V600TB	SKF
3	163.83 mm	QD bush SDS	3V	PHP3-3V650-SDS	SKF
3	163.83 mm	Taper bush 2517	3V	PHP3-3V650TB	SKF
3	173.99 mm	QD bush SDS	3V	PHP3-3V690-SDS	SKF
3	173.99 mm	Taper bush 2517	3V	PHP3-3V690TB	SKF
3	201.93 mm	QD bush SK	3V	PHP3-3V800-SK	SKF
3	201.93 mm	Taper bush 2517	3V	PHP3-3V800TB	SKF
3	267.97 mm	QD bush SK	3V	PHP3-3V1060-SK	SKF
3	267.97 mm	Taper bush 2517	3V	PHP3-3V1060TB	SKF
3	354.33 mm	QD bush SK	3V	PHP3-3V1400-SK	SKF
3	354.33 mm	Taper bush 2517	3V	PHP3-3V1400TB	SKF
3	405.13 mm	QD bush SK	3V	PHP3-3V1600-SK	SKF
3	481.33 mm	QD bush SF	3V	PHP3-3V1900-SF	SKF
3	481.33 mm	Taper bush 3020	3V	PHP3-3V1900TB	SKF
3	633.73 mm	QD bush SF	3V	PHP3-3V2500-SF	SKF
3	633.73 mm	Taper bush 3020	3V	PHP3-3V2500TB	SKF
3	849.63 mm	QD bush SF	3V	PHP3-3V3350-SF	SKF
3	849.63 mm	Taper bush 3020	3V	PHP3-3V3350TB	SKF
4	66.04 mm	QD bush JA	3V	PHP4-3V265-JA	SKF
4	69.85 mm	QD bush JA	3V	PHP4-3V280-JA	SKF
4	69.85 mm	Taper bush 1108	3V	PHP4-3V280TB	SKF
4	74.93 mm	QD bush SH	3V	PHP4-3V300-SH	SKF
4	74.93 mm	Taper bush 1210	3V	PHP4-3V300TB	SKF
4	78.74 mm	QD bush SH	3V	PHP4-3V315-SH	SKF
4	78.74 mm	Taper bush 1210	3V	PHP4-3V315TB	SKF
4	83.82 mm	QD bush SH	3V	PHP4-3V335-SH	SKF
4	83.82 mm	Taper bush 1610	3V	PHP4-3V335TB	SKF
4	91.44 mm	QD bush SH	3V	PHP4-3V365-SH	SKF
4	91.44 mm	Taper bush 1610	3V	PHP4-3V365TB	SKF
4	103.38 mm	QD bush SH	3V	PHP4-3V412-SH	SKF
4	103.38 mm	Taper bush 1610	3V	PHP4-3V412TB	SKF
4	113.03 mm	QD bush SDS	3V	PHP4-3V450-SDS	SKF
4	113.03 mm	Taper bush 1610	3V	PHP4-3V450TB	SKF
4	119.38 mm	QD bush SDS	3V	PHP4-3V475-SDS	SKF
4	119.38 mm	Taper bush 1610	3V	PHP4-3V475TB	SKF
4	125.73 mm	QD bush SDS	3V	PHP4-3V500-SDS	SKF
4	125.73 mm	Taper bush 1610	3V	PHP4-3V500TB	SKF
4	133.35 mm	QD bush SDS	3V	PHP4-3V530-SDS	SKF
4	133.35 mm	Taper bush 1610	3V	PHP4-3V530TB	SKF
4	140.97 mm	QD bush SDS	3V	PHP4-3V560-SDS	SKF
4	140.97 mm	Taper bush 1610	3V	PHP4-3V560TB	SKF
4	151.13 mm	QD bush SK	3V	PHP4-3V600-SK	SKF
4	151.13 mm	Taper bush 2517	3V	PHP4-3V600TB	SKF
4	163.83 mm	QD bush SK	3V	PHP4-3V650-SK	SKF
4	163.83 mm	Taper bush 2517	3V	PHP4-3V650TB	SKF
4	173.99 mm	QD bush SK	3V	PHP4-3V690-SK	SKF
4	173.99 mm	Taper bush 2517	3V	PHP4-3V690TB	SKF
4	201.93 mm	QD bush SK	3V	PHP4-3V800-SK	SKF
4	201.93 mm	Taper bush 2517	3V	PHP4-3V800TB	SKF
4	267.97 mm	QD bush SK	3V	PHP4-3V1060-SK	SKF
4	267.97 mm	Taper bush 2517	3V	PHP4-3V1060TB	SKF
4	354.33 mm	QD bush SK	3V	PHP4-3V1400-SK	SKF
4	354.33 mm	Taper bush 2517	3V	PHP4-3V1400TB	SKF
4	405.13 mm	QD bush SK	3V	PHP4-3V1600-SK	SKF
4	481.33 mm	QD bush SF	3V	PHP4-3V1900-SF	SKF
4	481.33 mm	Taper bush 3020	3V	PHP4-3V1900TB	SKF
4	633.73 mm	QD bush SF	3V	PHP4-3V2500-SF	SKF
4	633.73 mm	Taper bush 3020	3V	PHP4-3V2500TB	SKF
4	849.63 mm	QD bush E	3V	PHP4-3V3350-E	SKF
4	849.63 mm	Taper bush 3020	3V	PHP4-3V3350TB	SKF
5	119.38 mm	QD bush SDS	3V	PHP5-3V475-SDS	SKF
5	119.38 mm	Taper bush 2517	3V	PHP5-3V475TB	SKF
5	125.73 mm	QD bush SDS	3V	PHP5-3V500-SDS	SKF
5	125.73 mm	Taper bush 2517	3V	PHP5-3V500TB	SKF
5	133.35 mm	QD bush SK	3V	PHP5-3V530-SK	SKF
5	133.35 mm	Taper bush 2517	3V	PHP5-3V530TB	SKF
5	140.97 mm	QD bush SK	3V	PHP5-3V560-SK	SKF
5	140.97 mm	Taper bush 2517	3V	PHP5-3V560TB	SKF
5	151.13 mm	QD bush SK	3V	PHP5-3V600-SK	SKF
5	151.13 mm	Taper bush 2517	3V	PHP5-3V600TB	SKF
5	163.83 mm	QD bush SK	3V	PHP5-3V650-SK	SKF
5	163.83 mm	Taper bush 2517	3V	PHP5-3V650TB	SKF
5	173.99 mm	QD bush SK	3V	PHP5-3V690-SK	SKF
5	173.99 mm	Taper bush 2517	3V	PHP5-3V690TB	SKF
5	201.93 mm	QD bush SK	3V	PHP5-3V800-SK	SKF
5	201.93 mm	Taper bush 2517	3V	PHP5-3V800TB	SKF
5	267.97 mm	QD bush SK	3V	PHP5-3V1060-SK	SKF
5	267.97 mm	Taper bush 2517	3V	PHP5-3V1060TB	SKF
5	354.33 mm	QD bush SF	3V	PHP5-3V1400-SF	SKF
5	354.33 mm	Taper bush 2517	3V	PHP5-3V1400TB	SKF
5	481.33 mm	QD bush SF	3V	PHP5-3V1900-SF	SKF
5	481.33 mm	Taper bush 3030	3V	PHP5-3V1900TB	SKF
5	633.73 mm	QD bush E	3V	PHP5-3V2500-E	SKF
5	633.73 mm	Taper bush 3030	3V	PHP5-3V2500TB	SKF
5	849.63 mm	QD bush E	3V	PHP5-3V3350-E	SKF
5	849.63 mm	Taper bush 3030	3V	PHP5-3V3350TB	SKF
6	119.38 mm	QD bush SK	3V	PHP6-3V475-SK	SKF
6	119.38 mm	Taper bush 2517	3V	PHP6-3V475TB	SKF
6	125.73 mm	QD bush SK	3V	PHP6-3V500-SK	SKF
6	125.73 mm	Taper bush 2517	3V	PHP6-3V500TB	SKF
6	133.35 mm	QD bush SK	3V	PHP6-3V530-SK	SKF
6	133.35 mm	Taper bush 2517	3V	PHP6-3V530TB	SKF
6	140.97 mm	QD bush SK	3V	PHP6-3V560-SK	SKF
6	140.97 mm	Taper bush 2517	3V	PHP6-3V560TB	SKF
6	151.13 mm	QD bush SK	3V	PHP6-3V600-SK	SKF
6	151.13 mm	Taper bush 2517	3V	PHP6-3V600TB	SKF
6	163.83 mm	QD bush SK	3V	PHP6-3V650-SK	SKF
6	163.83 mm	Taper bush 2517	3V	PHP6-3V650TB	SKF
6	173.99 mm	QD bush SK	3V	PHP6-3V690-SK	SKF
6	173.99 mm	Taper bush 2517	3V	PHP6-3V690TB	SKF
6	201.93 mm	QD bush SK	3V	PHP6-3V800-SK	SKF
6	201.93 mm	Taper bush 2517	3V	PHP6-3V800TB	SKF
6	267.97 mm	QD bush SF	3V	PHP6-3V1060-SF	SKF
6	267.97 mm	Taper bush 2517	3V	PHP6-3V1060TB	SKF
6	354.33 mm	QD bush SF	3V	PHP6-3V1400-SF	SKF
6	354.33 mm	Taper bush 2517	3V	PHP6-3V1400TB	SKF
6	481.33 mm	QD bush E	3V	PHP6-3V1900-E	SKF
6	481.33 mm	Taper bush 3020	3V	PHP6-3V1900TB	SKF
6	633.73 mm	QD bush E	3V	PHP6-3V2500-E	SKF
6	633.73 mm	Taper bush 3030	3V	PHP6-3V2500TB	SKF
6	849.63 mm	QD bush E	3V	PHP6-3V3350-E	SKF
6	849.63 mm	Taper bush 3030	3V	PHP6-3V3350TB	SKF
8	119.38 mm	QD bush SK	3V	PHP8-3V475-SK	SKF
8	119.38 mm	Taper bush 2517	3V	PHP8-3V475TB	SKF
8	125.73 mm	QD bush SK	3V	PHP8-3V500-SK	SKF
8	125.73 mm	Taper bush 2517	3V	PHP8-3V500TB	SKF
8	133.35 mm	QD bush SK	3V	PHP8-3V530-SK	SKF
8	133.35 mm	Taper bush 2517	3V	PHP8-3V530TB	SKF
8	140.97 mm	QD bush SK	3V	PHP8-3V560-SK	SKF
8	140.97 mm	Taper bush 2517	3V	PHP8-3V560TB	SKF
8	151.13 mm	QD bush SK	3V	PHP8-3V600-SK	SKF
8	151.13 mm	Taper bush 2517	3V	PHP8-3V600TB	SKF
8	163.83 mm	QD bush SK	3V	PHP8-3V650-SK	SKF
8	163.83 mm	Taper bush 2517	3V	PHP8-3V650TB	SKF
8	173.99 mm	QD bush SK	3V	PHP8-3V690-SK	SKF
8	173.99 mm	Taper bush 2517	3V	PHP8-3V690TB	SKF
8	201.93 mm	QD bush SF	3V	PHP8-3V800-SF	SKF
8	201.93 mm	Taper bush 3020	3V	PHP8-3V800TB	SKF
8	267.97 mm	QD bush SF	3V	PHP8-3V1060-SF	SKF
8	267.97 mm	Taper bush 3020	3V	PHP8-3V1060TB	SKF
8	354.33 mm	QD bush E	3V	PHP8-3V1400-E	SKF
8	354.33 mm	Taper bush 3020	3V	PHP8-3V1400TB	SKF
8	481.33 mm	QD bush E	3V	PHP8-3V1900-E	SKF
8	481.33 mm	Taper bush 3535	3V	PHP8-3V1900TB	SKF
8	633.73 mm	QD bush E	3V	PHP8-3V2500-E	SKF
8	633.73 mm	Taper bush 3535	3V	PHP8-3V2500TB	SKF
8	849.63 mm	QD bush F	3V	PHP8-3V3350-F	SKF
8	849.63 mm	Taper bush 4040	3V	PHP8-3V3350TB	SKF
10	119.38 mm	QD bush SK	3V	PHP10-3V475-SK	SKF
10	119.38 mm	Taper bush 2517	3V	PHP10-3V475TB	SKF

Part numbers and designations are those of the original manufacturers and are given for identification. cBallast is an independent supplier; confirm ratings against the nameplate of the installed equipment before ordering. Table generated from the cBallast catalogue on 2026-09-29.

Open / Download PDF

Compiled by cBallast for identification and cross-reference. Part numbers, designations and trademarks belong to their respective manufacturers. Confirm ratings and dimensions against the manufacturer's current documentation and the nameplate of the installed equipment before ordering or installation.