Bürkert 2/2-WAY or 3/2-WAY Rocker Solenoid Valve with Separating Diaphragm

Bürkert’s unique Type 0127 solenoid valve is pre-destined for use in laboratory, medical and analytical technology as the pioneer of small media-separated valves. It continues to set the pace today with its rocker technology, which activates the separating diaphragms between actuator and fluid. It guarantees precise switching of tiny volumes of even aggressive media at the lowest temperature input, thanks to the coil. It is also very easy to flush and is characterised by its minimal internal volume and freedom from almost all dead space. The valves can be stacked on manifolds and can be wired with central wiring on request. Special variants with minimum dead space are available on request.

Seal

FFKM, FKM, EPDM Valve body: PEEK, PPS (PVDF on request) Internal volume: Sub-base: from 44 µl Orifice: DN 0.8…DN 1.6 Typical product service: life 10 mio. switching cycles (according to laboratory endurance test with FKM and EPDM) Duty cycle: 100 % continuous operation Switching time: Open: approx. 25 ms (pressure build-up 0…10 %) Operating voltage: 12 V DC, 24 V DC, 24 V UC (other voltages on request) Nominal power: 3.4 W (Variants with internal power reduction possible) Voltage tolerance: ± 10 % Medium temperature: Max. - 10 °C…+ 55 °C Viscosity: Max. 21 mm²/s Electrical connection: Cable plug Type 1054  Port connection: Bürkert sub-base (16 × 27 mm) Degree of protection: IP65 with flying leads and cable plug Type 1054 

HS Code

8481.80

• Burkert 0127
• Buerkert 0127
• Bürkert 0127
• Type 0127
• Burkert Type 0127