Timing Belt Pulley Finder — HTD 3M / 5M / 8M / 14M, T5 / T10 / AT5 / AT10, XL / L / H / XH by Teeth and Belt Width (SKF PHP)

Size finder compiled by cBallast. 6-page PDF; the full content is on this page.

Compiled by

cBallast

Subject

Synchronous (timing) belt pulleys for metric and inch pitches

Document type

Size finder

Reference

catalogue 2026-09-29

Issued

2026-09-29

Pages

Format

Web page and PDF

Timing Belt Pulley Finder

Timing pulleys are defined by tooth profile and pitch (HTD 3M, 5M, 8M, 14M curvilinear; T5, T10, AT5, AT10 trapezoidal metric; MXL, XL, L, H, XH inch; GT/PowerGrip variants), number of teeth and belt width. The pitch diameter follows from teeth × pitch ÷ π, so the ratio of a drive is the tooth ratio. SKF designations read PHP 40-14M-40TB: 40 teeth, 14M pitch, 40 mm belt width, taper-bush mounting; inch pulleys state width in hundredths of an inch (PHP 19L050 = 19 teeth, L pitch, 0.50 in). The finder lists the catalogue by pitch, teeth and width so a pulley can be matched to an existing belt.

Pulleys with fewer than about 20 teeth need flanges on at least one pulley of the drive to keep the belt tracking; flanged versions carry an F in some designations. HTD and GT profiles are not interchangeable with trapezoidal T/AT profiles of the same pitch. Check that the bush or plain bore suits the shaft, and use a belt width equal to or narrower than the pulley face.

Coverage: 1,310 of 1,310 catalogue rows with a readable size are listed (3,855 rows in these categories in total; the remainder can be found through the site search by part number).

3M pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
10	9 mm	9.55 mm	Rough stock bore	PHP10-3M-09RSB	SKF
10	15 mm	9.55 mm	Rough stock bore	PHP10-3M-15RSB	SKF
12	9 mm	11.46 mm	Rough stock bore	PHP12-3M-09RSB	SKF
12	15 mm	11.46 mm	Rough stock bore	PHP12-3M-15RSB	SKF
14	9 mm	13.37 mm	Rough stock bore	PHP14-3M-09RSB	SKF
14	15 mm	13.37 mm	Rough stock bore	PHP14-3M-15RSB	SKF
15	9 mm	14.32 mm	Rough stock bore	PHP15-3M-09RSB	SKF
15	15 mm	14.32 mm	Rough stock bore	PHP15-3M-15RSB	SKF
16	9 mm	15.28 mm	Rough stock bore	PHP16-3M-09RSB	SKF
16	15 mm	15.28 mm	Rough stock bore	PHP16-3M-15RSB	SKF
18	9 mm	17.19 mm	Rough stock bore	PHP18-3M-09RSB	SKF
18	15 mm	17.19 mm	Rough stock bore	PHP18-3M-15RSB	SKF
20	9 mm	19.1 mm	Rough stock bore	PHP20-3M-09RSB	SKF
20	15 mm	19.1 mm	Rough stock bore	PHP20-3M-15RSB	SKF
21	9 mm	20.05 mm	Rough stock bore	PHP21-3M-09RSB	SKF
21	15 mm	20.05 mm	Rough stock bore	PHP21-3M-15RSB	SKF
22	9 mm	21.01 mm	Rough stock bore	PHP22-3M-09RSB	SKF
22	15 mm	21.01 mm	Rough stock bore	PHP22-3M-15RSB	SKF
24	9 mm	22.92 mm	Rough stock bore	PHP24-3M-09RSB	SKF
24	15 mm	22.92 mm	Rough stock bore	PHP24-3M-15RSB	SKF
26	9 mm	24.83 mm	Rough stock bore	PHP26-3M-09RSB	SKF
26	15 mm	24.83 mm	Rough stock bore	PHP26-3M-15RSB	SKF
28	9 mm	26.74 mm	Rough stock bore	PHP28-3M-09RSB	SKF
28	15 mm	26.74 mm	Rough stock bore	PHP28-3M-15RSB	SKF
30	9 mm	28.65 mm	Rough stock bore	PHP30-3M-09RSB	SKF
30	15 mm	28.65 mm	Rough stock bore	PHP30-3M-15RSB	SKF
32	9 mm	30.56 mm	Rough stock bore	PHP32-3M-09RSB	SKF
32	15 mm	30.56 mm	Rough stock bore	PHP32-3M-15RSB	SKF
36	9 mm	34.38 mm	Rough stock bore	PHP36-3M-09RSB	SKF
36	15 mm	34.38 mm	Rough stock bore	PHP36-3M-15RSB	SKF
40	9 mm	38.2 mm	Rough stock bore	PHP40-3M-09RSB	SKF
40	15 mm	38.2 mm	Rough stock bore	PHP40-3M-15RSB	SKF
44	9 mm	42.02 mm	Rough stock bore	PHP44-3M-09RSB	SKF
44	15 mm	42.02 mm	Rough stock bore	PHP44-3M-15RSB	SKF
48	9 mm	45.84 mm	Rough stock bore	PHP48-3M-09RSB	SKF
48	15 mm	45.84 mm	Rough stock bore	PHP48-3M-15RSB	SKF
60	9 mm	57.3 mm	Rough stock bore	PHP60-3M-09RSB	SKF
60	15 mm	57.3 mm	Rough stock bore	PHP60-3M-15RSB	SKF
72	9 mm	68.75 mm	Rough stock bore	PHP72-3M-09RSB	SKF
72	15 mm	68.75 mm	Rough stock bore	PHP72-3M-15RSB	SKF

5M pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
12	9 mm	19.1 mm	Rough stock bore	PHP12-5M-09RSB	SKF
12	15 mm	19.1 mm	Rough stock bore	PHP12-5M-15RSB	SKF
12	25 mm	19.1 mm	Rough stock bore	PHP12-5M-25RSB	SKF
14	9 mm	22.28 mm	Rough stock bore	PHP14-5M-09RSB	SKF
14	15 mm	22.28 mm	Rough stock bore	PHP14-5M-15RSB	SKF
14	25 mm	22.28 mm	Rough stock bore	PHP14-5M-25RSB	SKF
15	9 mm	23.87 mm	Rough stock bore	PHP15-5M-09RSB	SKF
15	15 mm	23.87 mm	Rough stock bore	PHP15-5M-15RSB	SKF
15	25 mm	23.87 mm	Rough stock bore	PHP15-5M-25RSB	SKF
16	9 mm	25.46 mm	Rough stock bore	PHP16-5M-09RSB	SKF
16	15 mm	25.46 mm	Rough stock bore	PHP16-5M-15RSB	SKF
16	25 mm	25.46 mm	Rough stock bore	PHP16-5M-25RSB	SKF
18	9 mm	28.65 mm	Rough stock bore	PHP18-5M-09RSB	SKF
18	15 mm	28.65 mm	Rough stock bore	PHP18-5M-15RSB	SKF
18	25 mm	28.65 mm	Rough stock bore	PHP18-5M-25RSB	SKF
20	9 mm	31.83 mm	Rough stock bore	PHP20-5M-09RSB	SKF
20	15 mm	31.83 mm	Rough stock bore	PHP20-5M-15RSB	SKF
20	25 mm	31.83 mm	Rough stock bore	PHP20-5M-25RSB	SKF
21	9 mm	33.42 mm	Rough stock bore	PHP21-5M-09RSB	SKF
21	15 mm	33.42 mm	Rough stock bore	PHP21-5M-15RSB	SKF
21	25 mm	33.42 mm	Rough stock bore	PHP21-5M-25RSB	SKF
22	9 mm	35.01 mm	Rough stock bore	PHP22-5M-09RSB	SKF
22	15 mm	35.01 mm	Rough stock bore	PHP22-5M-15RSB	SKF
22	25 mm	35.01 mm	Rough stock bore	PHP22-5M-25RSB	SKF
24	9 mm	38.2 mm	Rough stock bore	PHP24-5M-09RSB	SKF
24	15 mm	38.2 mm	Rough stock bore	PHP24-5M-15RSB	SKF
24	25 mm	38.2 mm	Rough stock bore	PHP24-5M-25RSB	SKF
26	9 mm	41.38 mm	Rough stock bore	PHP26-5M-09RSB	SKF
26	15 mm	41.38 mm	Rough stock bore	PHP26-5M-15RSB	SKF
26	25 mm	41.38 mm	Rough stock bore	PHP26-5M-25RSB	SKF
28	9 mm	44.56 mm	Rough stock bore	PHP28-5M-09RSB	SKF
28	15 mm	44.56 mm	Rough stock bore	PHP28-5M-15RSB	SKF
28	25 mm	44.56 mm	Rough stock bore	PHP28-5M-25RSB	SKF
30	9 mm	47.75 mm	Rough stock bore	PHP30-5M-09RSB	SKF
30	15 mm	47.75 mm	Rough stock bore	PHP30-5M-15RSB	SKF
30	25 mm	47.75 mm	Rough stock bore	PHP30-5M-25RSB	SKF
32	9 mm	50.93 mm	Rough stock bore	PHP32-5M-09RSB	SKF
32	15 mm	50.93 mm	Rough stock bore	PHP32-5M-15RSB	SKF
32	25 mm	50.93 mm	Rough stock bore	PHP32-5M-25RSB	SKF
34	15 mm	54.11 mm	Taper bush	PHP34-5M-15TB	SKF
36	9 mm	57.3 mm	Rough stock bore	PHP36-5M-09RSB	SKF
36	15 mm	57.3 mm	Rough stock bore	PHP36-5M-15RSB	SKF
36	15 mm	57.3 mm	Taper bush	PHP36-5M-15TB	SKF
36	25 mm	57.3 mm	Rough stock bore	PHP36-5M-25RSB	SKF
38	15 mm	60.48 mm	Taper bush	PHP38-5M-15TB	SKF
40	9 mm	63.66 mm	Rough stock bore	PHP40-5M-09RSB	SKF
40	15 mm	63.66 mm	Rough stock bore	PHP40-5M-15RSB	SKF
40	15 mm	63.66 mm	Taper bush	PHP40-5M-15TB	SKF
40	25 mm	63.66 mm	Rough stock bore	PHP40-5M-25RSB	SKF
44	9 mm	70.03 mm	Rough stock bore	PHP44-5M-09RSB	SKF
44	15 mm	70.03 mm	Rough stock bore	PHP44-5M-15RSB	SKF
44	15 mm	70.03 mm	Taper bush	PHP44-5M-15TB	SKF
44	25 mm	70.03 mm	Rough stock bore	PHP44-5M-25RSB	SKF
48	9 mm	76.39 mm	Rough stock bore	PHP48-5M-09RSB	SKF
48	15 mm	76.39 mm	Rough stock bore	PHP48-5M-15RSB	SKF
48	15 mm	76.39 mm	Taper bush	PHP48-5M-15TB	SKF
48	25 mm	76.39 mm	Rough stock bore	PHP48-5M-25RSB	SKF
56	15 mm	89.13 mm	Taper bush	PHP56-5M-15TB	SKF
60	9 mm	95.49 mm	Rough stock bore	PHP60-5M-09RSB	SKF
60	15 mm	95.49 mm	Rough stock bore	PHP60-5M-15RSB	SKF
60	25 mm	95.49 mm	Rough stock bore	PHP60-5M-25RSB	SKF
64	15 mm	101.86 mm	Taper bush	PHP64-5M-15TB	SKF
72	9 mm	114.59 mm	Rough stock bore	PHP72-5M-09RSB	SKF
72	15 mm	114.59 mm	Rough stock bore	PHP72-5M-15RSB	SKF
72	15 mm	114.59 mm	Taper bush	PHP72-5M-15TB	SKF
72	25 mm	114.59 mm	Rough stock bore	PHP72-5M-25RSB	SKF
80	15 mm	127.32 mm	Taper bush	PHP80-5M-15TB	SKF
80	25 mm	127.32 mm	Rough stock bore	PHP80-5M-25RSB	SKF
90	15 mm	143.24 mm	Taper bush	PHP90-5M-15TB	SKF
112	15 mm	178.25 mm	Taper bush	PHP112-5M-15TB	SKF
136	15 mm	216.45 mm	Taper bush	PHP136-5M-15TB	SKF
150	15 mm	238.73 mm	Taper bush	PHP150-5M-15TB	SKF

8M pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
20	20 mm	50.93 mm	Rough stock bore	PHP20-8M-20RSB	SKF
20	30 mm	50.93 mm	Rough stock bore	PHP20-8M-30RSB	SKF
20	30 mm	50.93 mm	Taper bush	PHP20-8M-30TB	SKF
21	20 mm	53.47 mm	Rough stock bore	PHP21-8M-20RSB	SKF
21	30 mm	53.47 mm	Rough stock bore	PHP21-8M-30RSB	SKF
21	30 mm	53.47 mm	Taper bush	PHP21-8M-30TB	SKF
22	20 mm	56.02 mm	Rough stock bore	PHP22-8M-20RSB	SKF
22	20 mm	56.02 mm	Taper bush	PHP22-8M-20TB	SKF
22	30 mm	56.02 mm	Rough stock bore	PHP22-8M-30RSB	SKF
22	30 mm	56.02 mm	Taper bush	PHP22-8M-30TB	SKF
22	50 mm	56.02 mm	Rough stock bore	PHP22-8M-50RSB	SKF
22	85 mm	56.02 mm	Rough stock bore	PHP22-8M-85RSB	SKF
23	20 mm	58.57 mm	Rough stock bore	PHP23-8M-20RSB	SKF
23	30 mm	57.57 mm	Rough stock bore	PHP23-8M-30RSB	SKF
23	30 mm	58.57 mm	Taper bush	PHP23-8M-30TB	SKF
23	50 mm	58.57 mm	Rough stock bore	PHP23-8M-50RSB	SKF
23	85 mm	58.57 mm	Rough stock bore	PHP23-8M-85RSB	SKF
24	20 mm	61.12 mm	Rough stock bore	PHP24-8M-20RSB	SKF
24	20 mm	61.12 mm	Taper bush	PHP24-8M-20TB	SKF
24	30 mm	61.12 mm	Rough stock bore	PHP24-8M-30RSB	SKF
24	30 mm	61.12 mm	Taper bush	PHP24-8M-30TB	SKF
24	50 mm	61.12 mm	Rough stock bore	PHP24-8M-50RSB	SKF
24	50 mm	61.12 mm	Taper bush	PHP24-8M-50TB	SKF
24	85 mm	61.12 mm	Rough stock bore	PHP24-8M-85RSB	SKF
24	85 mm	61.12 mm	Taper bush	PHP24-8M-85TB	SKF
25	20 mm	63.66 mm	Rough stock bore	PHP25-8M-20RSB	SKF
25	30 mm	63.66 mm	Rough stock bore	PHP25-8M-30RSB	SKF
25	30 mm	63.66 mm	Taper bush	PHP25-8M-30TB	SKF
25	50 mm	63.66 mm	Rough stock bore	PHP25-8M-50RSB	SKF
25	85 mm	63.66 mm	Rough stock bore	PHP25-8M-85RSB	SKF
26	20 mm	66.21 mm	Rough stock bore	PHP26-8M-20RSB	SKF
26	20 mm	66.21 mm	Taper bush	PHP26-8M-20TB	SKF
26	30 mm	66.21 mm	Rough stock bore	PHP26-8M-30RSB	SKF
26	30 mm	66.21 mm	Taper bush	PHP26-8M-30TB	SKF
26	50 mm	66.21 mm	Rough stock bore	PHP26-8M-50RSB	SKF
26	50 mm	66.21 mm	Taper bush	PHP26-8M-50TB	SKF
26	85 mm	66.21 mm	Rough stock bore	PHP26-8M-85RSB	SKF
26	85 mm	66.21 mm	Taper bush	PHP26-8M-85TB	SKF
27	20 mm	68.75 mm	Rough stock bore	PHP27-8M-20RSB	SKF
27	30 mm	68.75 mm	Rough stock bore	PHP27-8M-30RSB	SKF
27	30 mm	68.75 mm	Taper bush	PHP27-8M-30TB	SKF
27	50 mm	68.75 mm	Rough stock bore	PHP27-8M-50RSB	SKF
27	50 mm	68.75 mm	Taper bush	PHP27-8M-50TB	SKF
27	85 mm	68.75 mm	Rough stock bore	PHP27-8M-85RSB	SKF
28	20 mm	71.3 mm	Rough stock bore	PHP28-8M-20RSB	SKF
28	20 mm	71.3 mm	Taper bush	PHP28-8M-20TB	SKF
28	30 mm	71.3 mm	Rough stock bore	PHP28-8M-30RSB	SKF
28	30 mm	71.3 mm	Taper bush	PHP28-8M-30TB	SKF
28	50 mm	71.3 mm	Rough stock bore	PHP28-8M-50RSB	SKF
28	50 mm	71.3 mm	Taper bush	PHP28-8M-50TB	SKF
28	85 mm	71.3 mm	Rough stock bore	PHP28-8M-85RSB	SKF
28	85 mm	71.3 mm	Taper bush	PHP28-8M-85TB	SKF
29	20 mm	73.85 mm	Rough stock bore	PHP29-8M-20RSB	SKF
30	20 mm	76.39 mm	Rough stock bore	PHP30-8M-20RSB	SKF
30	20 mm	76.39 mm	Taper bush	PHP30-8M-20TB	SKF
30	30 mm	76.39 mm	Rough stock bore	PHP30-8M-30RSB	SKF
30	30 mm	76.39 mm	Taper bush	PHP30-8M-30TB	SKF
30	50 mm	76.39 mm	Rough stock bore	PHP30-8M-50RSB	SKF
30	50 mm	76.39 mm	Taper bush	PHP30-8M-50TB	SKF
30	85 mm	76.39 mm	Rough stock bore	PHP30-8M-85RSB	SKF
30	85 mm	76.39 mm	Taper bush	PHP30-8M-85TB	SKF
31	30 mm	78.94 mm	Rough stock bore	PHP31-8M-30RSB	SKF
31	30 mm	78.94 mm	Taper bush	PHP31-8M-30TB	SKF
31	50 mm	78.94 mm	Rough stock bore	PHP31-8M-50RSB	SKF
31	50 mm	78.94 mm	Taper bush	PHP31-8M-50TB	SKF
31	85 mm	78.94 mm	Rough stock bore	PHP31-8M-85RSB	SKF
32	20 mm	81.49 mm	Rough stock bore	PHP32-8M-20RSB	SKF
32	20 mm	81.49 mm	Taper bush	PHP32-8M-20TB	SKF
32	30 mm	81.49 mm	Rough stock bore	PHP32-8M-30RSB	SKF
32	30 mm	81.49 mm	Taper bush	PHP32-8M-30TB	SKF
32	50 mm	81.49 mm	Rough stock bore	PHP32-8M-50RSB	SKF
32	50 mm	81.49 mm	Taper bush	PHP32-8M-50TB	SKF
32	85 mm	81.49 mm	Rough stock bore	PHP32-8M-85RSB	SKF
33	30 mm	84.03 mm	Rough stock bore	PHP33-8M-30RSB	SKF
33	30 mm	84.03 mm	Taper bush	PHP33-8M-30TB	SKF
33	50 mm	84.03 mm	Rough stock bore	PHP33-8M-50RSB	SKF
33	50 mm	84.03 mm	Taper bush	PHP33-8M-50TB	SKF
33	85 mm	84.03 mm	Rough stock bore	PHP33-8M-85RSB	SKF
33	85 mm	84.03 mm	Taper bush	PHP33-8M-85TB	SKF
34	20 mm	86.58 mm	Rough stock bore	PHP34-8M-20RSB	SKF
34	20 mm	86.58 mm	Taper bush	PHP34-8M-20TB	SKF
34	30 mm	86.58 mm	Rough stock bore	PHP34-8M-30RSB	SKF
34	30 mm	86.58 mm	Taper bush	PHP34-8M-30TB	SKF
34	50 mm	86.58 mm	Rough stock bore	PHP34-8M-50RSB	SKF
34	50 mm	86.58 mm	Taper bush	PHP34-8M-50TB	SKF
34	85 mm	86.58 mm	Rough stock bore	PHP34-8M-85RSB	SKF
34	85 mm	86.58 mm	Taper bush	PHP34-8M-85TB	SKF
35	30 mm	89.13 mm	Rough stock bore	PHP35-8M-30RSB	SKF
35	30 mm	89.13 mm	Taper bush	PHP35-8M-30TB	SKF
35	50 mm	89.13 mm	Rough stock bore	PHP35-8M-50RSB	SKF
35	50 mm	89.13 mm	Taper bush	PHP35-8M-50TB	SKF
35	85 mm	89.13 mm	Rough stock bore	PHP35-8M-85RSB	SKF
35	85 mm	89.13 mm	Taper bush	PHP35-8M-85TB	SKF
36	20 mm	91.67 mm	Rough stock bore	PHP36-8M-20RSB	SKF
36	20 mm	91.67 mm	Taper bush	PHP36-8M-20TB	SKF
36	30 mm	91.67 mm	Rough stock bore	PHP36-8M-30RSB	SKF
36	30 mm	91.67 mm	Taper bush	PHP36-8M-30TB	SKF
36	50 mm	91.67 mm	Rough stock bore	PHP36-8M-50RSB	SKF
36	50 mm	91.67 mm	Taper bush	PHP36-8M-50TB	SKF
36	85 mm	91.67 mm	Rough stock bore	PHP36-8M-85RSB	SKF
36	85 mm	91.67 mm	Taper bush	PHP36-8M-85TB	SKF
38	20 mm	96.77 mm	Rough stock bore	PHP38-8M-20RSB	SKF
38	20 mm	96.77 mm	Taper bush	PHP38-8M-20TB	SKF
38	30 mm	96.77 mm	Rough stock bore	PHP38-8M-30RSB	SKF
38	30 mm	96.77 mm	Taper bush	PHP38-8M-30TB	SKF
38	50 mm	96.77 mm	Rough stock bore	PHP38-8M-50RSB	SKF
38	50 mm	96.77 mm	Taper bush	PHP38-8M-50TB	SKF
38	85 mm	96.77 mm	Rough stock bore	PHP38-8M-85RSB	SKF
38	85 mm	96.77 mm	Taper bush	PHP38-8M-85TB	SKF
40	20 mm	101.86 mm	Rough stock bore	PHP40-8M-20RSB	SKF
40	20 mm	101.86 mm	Taper bush	PHP40-8M-20TB	SKF
40	30 mm	101.86 mm	Rough stock bore	PHP40-8M-30RSB	SKF
40	30 mm	101.86 mm	Taper bush	PHP40-8M-30TB	SKF
40	50 mm	101.86 mm	Rough stock bore	PHP40-8M-50RSB	SKF
40	50 mm	101.86 mm	Taper bush	PHP40-8M-50TB	SKF
40	85 mm	101.86 mm	Rough stock bore	PHP40-8M-85RSB	SKF
40	85 mm	101.86 mm	Taper bush	PHP40-8M-85TB	SKF
42	20 mm	106.95 mm	Taper bush	PHP42-8M-20TB	SKF
42	30 mm	106.95 mm	Rough stock bore	PHP42-8M-30RSB	SKF
42	30 mm	106.95 mm	Taper bush	PHP42-8M-30TB	SKF
42	50 mm	104.41 mm	Rough stock bore	PHP42-8M-50RSB	SKF
42	50 mm	106.95 mm	Taper bush	PHP42-8M-50TB	SKF
42	85 mm	106.95 mm	Rough stock bore	PHP42-8M-85RSB	SKF
42	85 mm	106.95 mm	Taper bush	PHP42-8M-85TB	SKF
44	20 mm	112.05 mm	Rough stock bore	PHP44-8M-20RSB	SKF
44	20 mm	112.05 mm	Taper bush	PHP44-8M-20TB	SKF
44	30 mm	112.05 mm	Rough stock bore	PHP44-8M-30RSB	SKF
44	30 mm	112.05 mm	Taper bush	PHP44-8M-30TB	SKF
44	50 mm	112.05 mm	Rough stock bore	PHP44-8M-50RSB	SKF
44	50 mm	112.05 mm	Taper bush	PHP44-8M-50TB	SKF
44	85 mm	112.05 mm	Rough stock bore	PHP44-8M-85RSB	SKF
44	85 mm	112.05 mm	Taper bush	PHP44-8M-85TB	SKF
45	30 mm	114.59 mm	Rough stock bore	PHP45-8M-30RSB	SKF
45	30 mm	114.59 mm	Taper bush	PHP45-8M-30TB	SKF
45	50 mm	114.59 mm	Rough stock bore	PHP45-8M-50RSB	SKF
45	50 mm	114.59 mm	Taper bush	PHP45-8M-50TB	SKF
45	85 mm	114.59 mm	Rough stock bore	PHP45-8M-85RSB	SKF
45	85 mm	114.59 mm	Taper bush	PHP45-8M-85TB	SKF
48	20 mm	122.23 mm	Rough stock bore	PHP48-8M-20RSB	SKF
48	20 mm	122.23 mm	Taper bush	PHP48-8M-20TB	SKF
48	30 mm	122.23 mm	Rough stock bore	PHP48-8M-30RSB	SKF
48	30 mm	122.23 mm	Taper bush	PHP48-8M-30TB	SKF
48	50 mm	122.23 mm	Rough stock bore	PHP48-8M-50RSB	SKF
48	50 mm	122.23 mm	Taper bush	PHP48-8M-50TB	SKF
48	85 mm	122.23 mm	Rough stock bore	PHP48-8M-85RSB	SKF
48	85 mm	122.23 mm	Taper bush	PHP48-8M-85TB	SKF
50	30 mm	127.32 mm	Rough stock bore	PHP50-8M-30RSB	SKF
50	30 mm	127.32 mm	Taper bush	PHP50-8M-30TB	SKF
50	50 mm	124.78 mm	Rough stock bore	PHP50-8M-50RSB	SKF
50	50 mm	127.32 mm	Taper bush	PHP50-8M-50TB	SKF
50	85 mm	127.32 mm	Rough stock bore	PHP50-8M-85RSB	SKF
50	85 mm	127.32 mm	Taper bush	PHP50-8M-85TB	SKF
52	30 mm	132.42 mm	Rough stock bore	PHP52-8M-30RSB	SKF
52	30 mm	132.42 mm	Taper bush	PHP52-8M-30TB	SKF
52	50 mm	127.32 mm	Rough stock bore	PHP52-8M-50RSB	SKF
52	50 mm	132.42 mm	Taper bush	PHP52-8M-50TB	SKF
52	85 mm	132.42 mm	Rough stock bore	PHP52-8M-85RSB	SKF
52	85 mm	132.42 mm	Taper bush	PHP52-8M-85TB	SKF
56	20 mm	142.6 mm	Rough stock bore	PHP56-8M-20RSB	SKF
56	20 mm	142.6 mm	Taper bush	PHP56-8M-20TB	SKF
56	30 mm	142.6 mm	Rough stock bore	PHP56-8M-30RSB	SKF
56	30 mm	142.6 mm	Taper bush	PHP56-8M-30TB	SKF
56	50 mm	142.6 mm	Rough stock bore	PHP56-8M-50RSB	SKF
56	50 mm	142.6 mm	Taper bush	PHP56-8M-50TB	SKF
56	85 mm	142.6 mm	Rough stock bore	PHP56-8M-85RSB	SKF
56	85 mm	142.6 mm	Taper bush	PHP56-8M-85TB	SKF
58	30 mm	147.7 mm	Taper bush	PHP58-8M-30TB	SKF
58	50 mm	147.7 mm	Taper bush	PHP58-8M-50TB	SKF
58	85 mm	147.7 mm	Taper bush	PHP58-8M-85TB	SKF
60	20 mm	152.79 mm	Taper bush	PHP60-8M-20TB	SKF
60	30 mm	152.79 mm	Rough stock bore	PHP60-8M-30RSB	SKF
60	30 mm	152.79 mm	Taper bush	PHP60-8M-30TB	SKF
60	50 mm	152.79 mm	Rough stock bore	PHP60-8M-50RSB	SKF
60	50 mm	152.79 mm	Taper bush	PHP60-8M-50TB	SKF
60	85 mm	152.79 mm	Rough stock bore	PHP60-8M-85RSB	SKF
60	85 mm	152.79 mm	Taper bush	PHP60-8M-85TB	SKF
64	20 mm	162.97 mm	Rough stock bore	PHP64-8M-20RSB	SKF
64	20 mm	162.97 mm	Taper bush	PHP64-8M-20TB	SKF
64	30 mm	162.97 mm	Rough stock bore	PHP64-8M-30RSB	SKF
64	30 mm	162.97 mm	Taper bush	PHP64-8M-30TB	SKF

14M pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
28	40 mm	124.78 mm	Rough stock bore	PHP28-14M-40RSB	SKF
28	40 mm	124.78 mm	Taper bush	PHP28-14M-40TB	SKF
28	55 mm	124.78 mm	Rough stock bore	PHP28-14M-55RSB	SKF
28	55 mm	124.78 mm	Taper bush	PHP28-14M-55TB	SKF
28	85 mm	124.78 mm	Rough stock bore	PHP28-14M-85RSB	SKF
28	85 mm	124.78 mm	Taper bush	PHP28-14M-85TB	SKF
28	115 mm	124.78 mm	Rough stock bore	PHP28-14M-115RSB	SKF
28	115 mm	124.78 mm	Taper bush	PHP28-14M-115TB	SKF
28	170 mm	124.78 mm	Rough stock bore	PHP28-14M-170RSB	SKF
29	40 mm	129.23 mm	Rough stock bore	PHP29-14M-40RSB	SKF
29	40 mm	129.23 mm	Taper bush	PHP29-14M-40TB	SKF
29	55 mm	129.23 mm	Rough stock bore	PHP29-14M-55RSB	SKF
29	55 mm	129.23 mm	Taper bush	PHP29-14M-55TB	SKF
29	85 mm	129.23 mm	Rough stock bore	PHP29-14M-85RSB	SKF
29	85 mm	129.23 mm	Taper bush	PHP29-14M-85TB	SKF
29	115 mm	129.23 mm	Rough stock bore	PHP29-14M-115RSB	SKF
29	115 mm	129.23 mm	Taper bush	PHP29-14M-115TB	SKF
29	170 mm	129.23 mm	Rough stock bore	PHP29-14M-170RSB	SKF
30	40 mm	133.69 mm	Rough stock bore	PHP30-14M-40RSB	SKF
30	40 mm	133.69 mm	Taper bush	PHP30-14M-40TB	SKF
30	55 mm	133.69 mm	Rough stock bore	PHP30-14M-55RSB	SKF
30	55 mm	133.69 mm	Taper bush	PHP30-14M-55TB	SKF
30	85 mm	133.69 mm	Rough stock bore	PHP30-14M-85RSB	SKF
30	85 mm	133.69 mm	Taper bush	PHP30-14M-85TB	SKF
30	115 mm	133.69 mm	Rough stock bore	PHP30-14M-115RSB	SKF
30	115 mm	133.69 mm	Taper bush	PHP30-14M-115TB	SKF
30	170 mm	133.69 mm	Rough stock bore	PHP30-14M-170RSB	SKF
32	40 mm	142.6 mm	Rough stock bore	PHP32-14M-40RSB	SKF
32	40 mm	142.6 mm	Taper bush	PHP32-14M-40TB	SKF
32	55 mm	142.6 mm	Rough stock bore	PHP32-14M-55RSB	SKF
32	55 mm	142.6 mm	Taper bush	PHP32-14M-55TB	SKF
32	85 mm	142.6 mm	Rough stock bore	PHP32-14M-85RSB	SKF
32	85 mm	142.6 mm	Taper bush	PHP32-14M-85TB	SKF
32	115 mm	142.6 mm	Rough stock bore	PHP32-14M-115RSB	SKF
32	115 mm	142.6 mm	Taper bush	PHP32-14M-115TB	SKF
32	170 mm	142.6 mm	Rough stock bore	PHP32-14M-170RSB	SKF
34	40 mm	151.52 mm	Rough stock bore	PHP34-14M-40RSB	SKF
34	40 mm	151.52 mm	Taper bush	PHP34-14M-40TB	SKF
34	55 mm	151.52 mm	Rough stock bore	PHP34-14M-55RSB	SKF
34	55 mm	151.51 mm	Taper bush	PHP34-14M-55TB	SKF
34	85 mm	151.52 mm	Rough stock bore	PHP34-14M-85RSB	SKF
34	85 mm	151.51 mm	Taper bush	PHP34-14M-85TB	SKF
34	115 mm	151.52 mm	Rough stock bore	PHP34-14M-115RSB	SKF
34	115 mm	151.52 mm	Taper bush	PHP34-14M-115TB	SKF
34	170 mm	151.52 mm	Rough stock bore	PHP34-14M-170RSB	SKF
35	40 mm	155.97 mm	Taper bush	PHP35-14M-40TB	SKF
35	55 mm	155.97 mm	Taper bush	PHP35-14M-55TB	SKF
35	85 mm	155.97 mm	Taper bush	PHP35-14M-85TB	SKF
35	115 mm	155.97 mm	Taper bush	PHP35-14M-115TB	SKF
35	170 mm	155.97 mm	Taper bush	PHP35-14M-170TB	SKF
36	40 mm	160.43 mm	Rough stock bore	PHP36-14M-40RSB	SKF
36	40 mm	160.43 mm	Taper bush	PHP36-14M-40TB	SKF
36	55 mm	160.43 mm	Rough stock bore	PHP36-14M-55RSB	SKF
36	55 mm	160.43 mm	Taper bush	PHP36-14M-55TB	SKF
36	85 mm	160.43 mm	Rough stock bore	PHP36-14M-85RSB	SKF
36	85 mm	160.43 mm	Taper bush	PHP36-14M-85TB	SKF
36	115 mm	160.43 mm	Rough stock bore	PHP36-14M-115RSB	SKF
36	115 mm	160.43 mm	Taper bush	PHP36-14M-115TB	SKF
36	170 mm	160.43 mm	Rough stock bore	PHP36-14M-170RSB	SKF
36	170 mm	160.43 mm	Taper bush	PHP36-14M-170TB	SKF
38	40 mm	169.34 mm	Rough stock bore	PHP38-14M-40RSB	SKF
38	40 mm	169.34 mm	Taper bush	PHP38-14M-40TB	SKF
38	55 mm	169.34 mm	Rough stock bore	PHP38-14M-55RSB	SKF
38	55 mm	169.34 mm	Taper bush	PHP38-14M-55TB	SKF
38	85 mm	169.34 mm	Rough stock bore	PHP38-14M-85RSB	SKF
38	85 mm	169.34 mm	Taper bush	PHP38-14M-85TB	SKF
38	115 mm	169.34 mm	Rough stock bore	PHP38-14M-115RSB	SKF
38	115 mm	169.34 mm	Taper bush	PHP38-14M-115TB	SKF
38	170 mm	169.34 mm	Rough stock bore	PHP38-14M-170RSB	SKF
38	170 mm	169.34 mm	Taper bush	PHP38-14M-170TB	SKF
40	40 mm	178.25 mm	Rough stock bore	PHP40-14M-40RSB	SKF
40	40 mm	178.25 mm	Taper bush	PHP40-14M-40TB	SKF
40	55 mm	178.25 mm	Rough stock bore	PHP40-14M-55RSB	SKF
40	55 mm	178.25 mm	Taper bush	PHP40-14M-55TB	SKF
40	85 mm	178.25 mm	Rough stock bore	PHP40-14M-85RSB	SKF
40	85 mm	178.25 mm	Taper bush	PHP40-14M-85TB	SKF
40	115 mm	178.25 mm	Rough stock bore	PHP40-14M-115RSB	SKF
40	115 mm	178.25 mm	Taper bush	PHP40-14M-115TB	SKF
40	170 mm	178.25 mm	Rough stock bore	PHP40-14M-170RSB	SKF
40	170 mm	178.25 mm	Taper bush	PHP40-14M-170TB	SKF
42	40 mm	187.17 mm	Taper bush	PHP42-14M-40TB	SKF
42	55 mm	187.17 mm	Taper bush	PHP42-14M-55TB	SKF
42	85 mm	181.17 mm	Taper bush	PHP42-14M-85TB	SKF
42	115 mm	187.17 mm	Taper bush	PHP42-14M-115TB	SKF
42	170 mm	187.17 mm	Taper bush	PHP42-14M-170TB	SKF
44	40 mm	196.08 mm	Rough stock bore	PHP44-14M-40RSB	SKF
44	40 mm	196.08 mm	Taper bush	PHP44-14M-40TB	SKF
44	55 mm	196.08 mm	Rough stock bore	PHP44-14M-55RSB	SKF
44	55 mm	196.08 mm	Taper bush	PHP44-14M-55TB	SKF
44	85 mm	196.08 mm	Rough stock bore	PHP44-14M-85RSB	SKF
44	85 mm	196.08 mm	Taper bush	PHP44-14M-85TB	SKF
44	115 mm	196.08 mm	Rough stock bore	PHP44-14M-115RSB	SKF
44	115 mm	196.08 mm	Taper bush	PHP44-14M-115TB	SKF
44	170 mm	196.08 mm	Rough stock bore	PHP44-14M-170RSB	SKF
44	170 mm	196.08 mm	Taper bush	PHP44-14M-170TB	SKF
45	40 mm	200.54 mm	Taper bush	PHP45-14M-40TB	SKF
45	55 mm	200.54 mm	Taper bush	PHP45-14M-55TB	SKF
45	85 mm	200.54 mm	Taper bush	PHP45-14M-85TB	SKF
45	115 mm	200.54 mm	Taper bush	PHP45-14M-115TB	SKF
45	170 mm	200.54 mm	Taper bush	PHP45-14M-170TB	SKF
48	40 mm	213.9 mm	Rough stock bore	PHP48-14M-40RSB	SKF
48	40 mm	213.9 mm	Taper bush	PHP48-14M-40TB	SKF
48	55 mm	213.9 mm	Rough stock bore	PHP48-14M-55RSB	SKF
48	55 mm	213.9 mm	Taper bush	PHP48-14M-55TB	SKF
48	85 mm	213.9 mm	Rough stock bore	PHP48-14M-85RSB	SKF
48	85 mm	213.9 mm	Taper bush	PHP48-14M-85TB	SKF
48	115 mm	213.9 mm	Rough stock bore	PHP48-14M-115RSB	SKF
48	115 mm	213.9 mm	Taper bush	PHP48-14M-115TB	SKF
48	170 mm	213.9 mm	Rough stock bore	PHP48-14M-170RSB	SKF
48	170 mm	213.9 mm	Taper bush	PHP48-14M-170TB	SKF
50	40 mm	222.82 mm	Taper bush	PHP50-14M-40TB	SKF
50	55 mm	228.82 mm	Taper bush	PHP50-14M-55TB	SKF
50	85 mm	222.82 mm	Taper bush	PHP50-14M-85TB	SKF
50	115 mm	222.82 mm	Taper bush	PHP50-14M-115TB	SKF
50	170 mm	222.82 mm	Taper bush	PHP50-14M-170TB	SKF
56	40 mm	249.55 mm	Rough stock bore	PHP56-14M-40RSB	SKF
56	40 mm	249.55 mm	Taper bush	PHP56-14M-40TB	SKF
56	55 mm	249.55 mm	Rough stock bore	PHP56-14M-55RSB	SKF
56	55 mm	249.55 mm	Taper bush	PHP56-14M-55TB	SKF
56	85 mm	249.55 mm	Rough stock bore	PHP56-14M-85RSB	SKF
56	85 mm	249.55 mm	Taper bush	PHP56-14M-85TB	SKF
56	115 mm	249.55 mm	Rough stock bore	PHP56-14M-115RSB	SKF
56	115 mm	249.55 mm	Taper bush	PHP56-14M-115TB	SKF
56	170 mm	249.55 mm	Rough stock bore	PHP56-14M-170RSB	SKF
56	170 mm	249.55 mm	Taper bush	PHP56-14M-170TB	SKF
60	40 mm	267.38 mm	Taper bush	PHP60-14M-40TB	SKF
60	55 mm	267.38 mm	Taper bush	PHP60-14M-55TB	SKF
60	85 mm	267.38 mm	Taper bush	PHP60-14M-85TB	SKF
60	115 mm	267.38 mm	Taper bush	PHP60-14M-115TB	SKF
60	170 mm	267.38 mm	Taper bush	PHP60-14M-170TB	SKF
64	40 mm	285.21 mm	Rough stock bore	PHP64-14M-40RSB	SKF
64	40 mm	285.21 mm	Taper bush	PHP64-14M-40TB	SKF
64	55 mm	285.21 mm	Rough stock bore	PHP64-14M-55RSB	SKF
64	55 mm	285.21 mm	Taper bush	PHP64-14M-55TB	SKF
64	85 mm	285.21 mm	Rough stock bore	PHP64-14M-85RSB	SKF
64	85 mm	285.21 mm	Taper bush	PHP64-14M-85TB	SKF
64	115 mm	285.21 mm	Rough stock bore	PHP64-14M-115RSB	SKF
64	115 mm	285.21 mm	Taper bush	PHP64-14M-115TB	SKF
64	170 mm	285.21 mm	Rough stock bore	PHP64-14M-170RSB	SKF
64	170 mm	285.21 mm	Taper bush	PHP64-14M-170TB	SKF
72	40 mm	320.86 mm	Rough stock bore	PHP72-14M-40RSB	SKF
72	40 mm	320.86 mm	Taper bush	PHP72-14M-40TB	SKF
72	55 mm	320.86 mm	Rough stock bore	PHP72-14M-55RSB	SKF
72	55 mm	320.86 mm	Taper bush	PHP72-14M-55TB	SKF
72	85 mm	320.86 mm	Rough stock bore	PHP72-14M-85RSB	SKF
72	85 mm	320.86 mm	Taper bush	PHP72-14M-85TB	SKF
72	115 mm	320.86 mm	Rough stock bore	PHP72-14M-115RSB	SKF
72	115 mm	320.86 mm	Taper bush	PHP72-14M-115TB	SKF
72	170 mm	320.86 mm	Rough stock bore	PHP72-14M-170RSB	SKF
72	170 mm	320.86 mm	Taper bush	PHP72-14M-170TB	SKF
80	40 mm	356.51 mm	Rough stock bore	PHP80-14M-40RSB	SKF
80	40 mm	356.51 mm	Taper bush	PHP80-14M-40TB	SKF
80	55 mm	356.51 mm	Rough stock bore	PHP80-14M-55RSB	SKF
80	55 mm	356.51 mm	Taper bush	PHP80-14M-55TB	SKF
80	85 mm	356.51 mm	Rough stock bore	PHP80-14M-85RSB	SKF
80	85 mm	356.51 mm	Taper bush	PHP80-14M-85TB	SKF
80	115 mm	356.51 mm	Rough stock bore	PHP80-14M-115RSB	SKF
80	115 mm	356.51 mm	Taper bush	PHP80-14M-115TB	SKF
80	170 mm	356.51 mm	Rough stock bore	PHP80-14M-170RSB	SKF
80	170 mm	356.51 mm	Taper bush	PHP80-14M-170TB	SKF
90	40 mm	401.07 mm	Rough stock bore	PHP90-14M-40RSB	SKF
90	40 mm	401.07 mm	Taper bush	PHP90-14M-40TB	SKF
90	55 mm	401.07 mm	Rough stock bore	PHP90-14M-55RSB	SKF
90	55 mm	401.07 mm	Taper bush	PHP90-14M-55TB	SKF
90	85 mm	401.07 mm	Rough stock bore	PHP90-14M-85RSB	SKF
90	85 mm	401.07 mm	Taper bush	PHP90-14M-85TB	SKF
90	115 mm	401.07 mm	Rough stock bore	PHP90-14M-115RSB	SKF
90	115 mm	401.07 mm	Taper bush	PHP90-14M-115TB	SKF
90	170 mm	401.07 mm	Rough stock bore	PHP90-14M-170RSB	SKF
90	170 mm	401.07 mm	Taper bush	PHP90-14M-170TB	SKF
112	40 mm	499.11 mm	Rough stock bore	PHP112-14M-40RSB	SKF
112	40 mm	499.11 mm	Taper bush	PHP112-14M-40TB	SKF
112	55 mm	499.11 mm	Rough stock bore	PHP112-14M-55RSB	SKF
112	55 mm	499.11 mm	Taper bush	PHP112-14M-55TB	SKF
112	85 mm	499.11 mm	Rough stock bore	PHP112-14M-85RSB	SKF
112	85 mm	499.11 mm	Taper bush	PHP112-14M-85TB	SKF
112	115 mm	499.11 mm	Rough stock bore	PHP112-14M-115RSB	SKF
112	115 mm	499.11 mm	Taper bush	PHP112-14M-115TB	SKF
112	170 mm	499.11 mm	Rough stock bore	PHP112-14M-170RSB	SKF
112	170 mm	499.11 mm	Taper bush	PHP112-14M-170TB	SKF

T5 pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
21	10 mm	20.69 mm	Rough stock bore	PHP21-T5-13RSB	SKF
21	10 mm	22.29 mm	Rough stock bore	PHP21-T5-14RSB	SKF
21	10 mm	23.88 mm	Rough stock bore	PHP21-T5-15RSB	SKF
21	10 mm	27.06 mm	Rough stock bore	PHP21-T5-17RSB	SKF
21	10 mm	28.65 mm	Rough stock bore	PHP21-T5-18RSB	SKF
21	10 mm	31.83 mm	Rough stock bore	PHP21-T5-20RSB	SKF
21	10 mm	35.01 mm	Rough stock bore	PHP21-T5-22RSB	SKF
21	10 mm	36.61 mm	Rough stock bore	PHP21-T5-23RSB	SKF
21	10 mm	39.8 mm	Rough stock bore	PHP21-T5-25RSB	SKF
21	10 mm	41.45 mm	Rough stock bore	PHP21-T5-26RSB	SKF
21	10 mm	47.76 mm	Rough stock bore	PHP21-T5-30RSB	SKF
21	10 mm	57.31 mm	Rough stock bore	PHP21-T5-36RSB	SKF
21	10 mm	76.39 mm	Rough stock bore	PHP21-T5-48RSB	SKF
21	10 mm	95.49 mm	Rough stock bore	PHP21-T5-60RSB	SKF
27	16 mm	20.69 mm	Rough stock bore	PHP27-T5-13RSB	SKF
27	16 mm	28.65 mm	Rough stock bore	PHP27-T5-18RSB	SKF
27	16 mm	31.83 mm	Rough stock bore	PHP27-T5-20RSB	SKF
27	16 mm	33.42 mm	Rough stock bore	PHP27-T5-21RSB	SKF
27	16 mm	35.01 mm	Rough stock bore	PHP27-T5-22RSB	SKF
27	16 mm	36.61 mm	Rough stock bore	PHP27-T5-23RSB	SKF
27	16 mm	38.21 mm	Rough stock bore	PHP27-T5-24RSB	SKF
27	16 mm	39.8 mm	Rough stock bore	PHP27-T5-25RSB	SKF
27	16 mm	41.45 mm	Rough stock bore	PHP27-T5-26RSB	SKF
27	16 mm	42.98 mm	Rough stock bore	PHP27-T5-27RSB	SKF
27	16 mm	44.56 mm	Rough stock bore	PHP27-T5-28RSB	SKF
27	16 mm	47.76 mm	Rough stock bore	PHP27-T5-30RSB	SKF
27	16 mm	50.94 mm	Rough stock bore	PHP27-T5-32RSB	SKF
27	16 mm	55.7 mm	Rough stock bore	PHP27-T5-35RSB	SKF
27	16 mm	60.48 mm	Rough stock bore	PHP27-T5-38RSB	SKF
27	16 mm	66.84 mm	Rough stock bore	PHP27-T5-42RSB	SKF
36	25 mm	22.29 mm	Rough stock bore	PHP36-AT5-14RSB	SKF
36	25 mm	60.48 mm	Rough stock bore	PHP36-AT5-38RSB	SKF
36	25 mm	23.88 mm	Rough stock bore	PHP36-T5-15RSB	SKF
36	25 mm	39.8 mm	Rough stock bore	PHP36-T5-25RSB	SKF
36	25 mm	47.76 mm	Rough stock bore	PHP36-T5-30RSB	SKF
36	25 mm	50.94 mm	Rough stock bore	PHP36-T5-32RSB	SKF

T10 pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
31	16 mm	50.93 mm	Rough stock bore	PHP31-T10-16RSB	SKF
31	16 mm	57.29 mm	Rough stock bore	PHP31-T10-18RSB	SKF
31	16 mm	63.66 mm	Rough stock bore	PHP31-T10-20RSB	SKF
31	16 mm	70.03 mm	Rough stock bore	PHP31-T10-22RSB	SKF
31	16 mm	76.39 mm	Rough stock bore	PHP31-T10-24RSB	SKF
31	16 mm	79.58 mm	Rough stock bore	PHP31-T10-25RSB	SKF
31	16 mm	85.95 mm	Rough stock bore	PHP31-T10-27RSB	SKF
31	16 mm	101.86 mm	Rough stock bore	PHP31-T10-32RSB	SKF
31	16 mm	127.32 mm	Rough stock bore	PHP31-T10-40RSB	SKF
31	16 mm	143.24 mm	Rough stock bore	PHP31-T10-45RSB	SKF
40	25 mm	44.56 mm	Rough stock bore	PHP40-T10-14RSB	SKF
40	25 mm	57.29 mm	Rough stock bore	PHP40-T10-18RSB	SKF
40	25 mm	60.48 mm	Rough stock bore	PHP40-T10-19RSB	SKF
40	25 mm	63.66 mm	Rough stock bore	PHP40-T10-20RSB	SKF
40	25 mm	66.85 mm	Rough stock bore	PHP40-T10-21RSB	SKF
40	25 mm	70.03 mm	Rough stock bore	PHP40-T10-22RSB	SKF
40	25 mm	76.39 mm	Rough stock bore	PHP40-T10-24RSB	SKF
40	25 mm	79.58 mm	Rough stock bore	PHP40-T10-25RSB	SKF
40	25 mm	85.95 mm	Rough stock bore	PHP40-T10-27RSB	SKF
40	25 mm	95.49 mm	Rough stock bore	PHP40-T10-30RSB	SKF
40	25 mm	101.86 mm	Rough stock bore	PHP40-T10-32RSB	SKF
40	25 mm	114.59 mm	Rough stock bore	PHP40-T10-36RSB	SKF
40	25 mm	127.32 mm	Rough stock bore	PHP40-T10-40RSB	SKF
40	25 mm	152.78 mm	Rough stock bore	PHP40-T10-48RSB	SKF
40	25 mm	181.44 mm	Rough stock bore	PHP40-T10-57RSB	SKF
47	32 mm	57.3 mm	Rough stock bore	PHP47-T10-18RSB	SKF
47	32 mm	63.66 mm	Rough stock bore	PHP47-T10-20RSB	SKF
47	32 mm	70.03 mm	Rough stock bore	PHP47-T10-22RSB	SKF
47	32 mm	79.58 mm	Rough stock bore	PHP47-T10-25RSB	SKF
47	32 mm	95.49 mm	Rough stock bore	PHP47-T10-30RSB	SKF
47	32 mm	101.86 mm	Rough stock bore	PHP47-T10-32RSB	SKF
47	32 mm	120.96 mm	Rough stock bore	PHP47-T10-38RSB	SKF
47	32 mm	127.32 mm	Rough stock bore	PHP47-T10-40RSB	SKF
66	50 mm	70.03 mm	Rough stock bore	PHP66-T10-22RSB	SKF
66	50 mm	79.58 mm	Rough stock bore	PHP66-T10-25RSB	SKF
66	50 mm	82.76 mm	Rough stock bore	PHP66-T10-26RSB	SKF
66	50 mm	95.49 mm	Rough stock bore	PHP66-T10-30RSB	SKF
66	50 mm	111.41 mm	Rough stock bore	PHP66-T10-35RSB	SKF
66	50 mm	127.32 mm	Rough stock bore	PHP66-T10-40RSB	SKF
66	50 mm	133.69 mm	Rough stock bore	PHP66-T10-42RSB	SKF
66	50 mm	152.79 mm	Rough stock bore	PHP66-T10-48RSB	SKF
66	50 mm	190.99 mm	Rough stock bore	PHP66-T10-60RSB	SKF

AT5 pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
27	16 mm	38.21 mm	Rough stock bore	PHP27-AT5-24RSB	SKF
27	16 mm	50.94 mm	Rough stock bore	PHP27-AT5-32RSB	SKF
27	16 mm	57.31 mm	Rough stock bore	PHP27-AT5-36RSB	SKF
27	16 mm	76.42 mm	Rough stock bore	PHP27-AT5-48RSB	SKF
27	16 mm	95.52 mm	Rough stock bore	PHP27-AT5-60RSB	SKF
27	16 mm	114.62 mm	Rough stock bore	PHP27-AT5-72RSB	SKF
27	16 mm	70.2 mm	Rough stock bore	PHP27-T5-44RSB	SKF
27	16 mm	71.62 mm	Rough stock bore	PHP27-T5-45RSB	SKF
27	16 mm	76.39 mm	Rough stock bore	PHP27-T5-48RSB	SKF
27	16 mm	85.94 mm	Rough stock bore	PHP27-T5-54RSB	SKF
27	16 mm	95.49 mm	Rough stock bore	PHP27-T5-60RSB	SKF
36	25 mm	70.2 mm	Rough stock bore	PHP36-T5-44RSB	SKF
36	25 mm	95.49 mm	Rough stock bore	PHP36-T5-60RSB	SKF

AT10 pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
31	16 mm	70.03 mm	Rough stock bore	PHP31-AT10-22RSB	SKF
40	25 mm	47.8 mm	Rough stock bore	PHP40-AT10-15RSB	SKF
40	25 mm	57.3 mm	Rough stock bore	PHP40-AT10-18RSB	SKF
40	25 mm	121 mm	Rough	PHP40-AT10-38RSB	SKF
40	25 mm	127.3 mm	Rough stock bore	PHP40-AT10-40RSB	SKF
47	32 mm	85.95 mm	Rough stock bore	PHP47-AT10-27RSB	SKF
47	32 mm	114.59 mm	Rough stock bore	PHP47-AT10-36RSB	SKF
66	50 mm	79.58 mm	Rough stock bore	PHP66-AT10-25RSB	SKF
66	50 mm	127.32 mm	Rough stock bore	PHP66-AT10-40RSB	SKF

XL pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
10	9.4 mm	16.17 mm	Rough stock bore	PHP10XL037RSB	SKF
11	9.4 mm	17.79 mm	Rough stock bore	PHP11XL037RSB	SKF
12	9.4 mm	19.4 mm	Rough stock bore	PHP12XL037RSB	SKF
13	9.4 mm	21.02 mm	Rough stock bore	PHP13XL037RSB	SKF
14	9.4 mm	22.64 mm	Rough stock bore	PHP14XL037RSB	SKF
15	9.4 mm	24.26 mm	Rough stock bore	PHP15XL037RSB	SKF
16	9.4 mm	25.87 mm	Rough stock bore	PHP16XL037RSB	SKF
17	9.4 mm	27.49 mm	Rough stock bore	PHP17XL037RSB	SKF
18	9.4 mm	29.11 mm	Rough stock bore	PHP18XL037RSB	SKF
19	9.4 mm	30.72 mm	Rough stock bore	PHP19XL037RSB	SKF
20	9.4 mm	32.34 mm	Rough stock bore	PHP20XL037RSB	SKF
21	9.4 mm	33.96 mm	Rough stock bore	PHP21XL037RSB	SKF
22	9.4 mm	35.57 mm	Rough stock bore	PHP22XL037RSB	SKF
24	9.4 mm	38.81 mm	Rough stock bore	PHP24XL037RSB	SKF
26	9.4 mm	42.04 mm	Rough stock bore	PHP26XL037RSB	SKF
27	9.4 mm	43.66 mm	Rough stock bore	PHP27XL037RSB	SKF
28	9.4 mm	45.28 mm	Rough stock bore	PHP28XL037RSB	SKF
29	9.4 mm	46.89 mm	Rough stock bore	PHP29XL037RSB	SKF
30	9.4 mm	48.51 mm	Rough stock bore	PHP30XL037RSB	SKF
32	9.4 mm	51.74 mm	Rough stock bore	PHP32XL037RSB	SKF
34	9.4 mm	54.98 mm	Rough stock bore	PHP34XL037RSB	SKF
35	9.4 mm	56.6 mm	Rough stock bore	PHP35XL037RSB	SKF
36	9.4 mm	58.21 mm	Rough stock bore	PHP36XL037RSB	SKF
38	9.4 mm	61.45 mm	Rough stock bore	PHP38XL037RSB	SKF
40	9.4 mm	64.68 mm	Rough stock bore	PHP40XL037RSB	SKF
42	9.4 mm	67.91 mm	Rough stock bore	PHP42XL037RSB	SKF
44	9.4 mm	71.15 mm	Rough stock bore	PHP44XL037RSB	SKF
45	9.4 mm	72.77 mm	Rough stock bore	PHP45XL037RSB	SKF
48	9.4 mm	77.62 mm	Rough stock bore	PHP48XL037RSB	SKF
60	9.4 mm	97.02 mm	Rough stock bore	PHP60XL037RSB	SKF
72	9.4 mm	116.43 mm	Rough stock bore	PHP72XL037RSB	SKF

L pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
10	12.7 mm	30.32 mm	Rough stock bore	PHP10L050RSB	SKF
10	19 mm	30.32 mm	Rough stock bore	PHP10L075RSB	SKF
10	25.4 mm	30.32 mm	Rough stock bore	PHP10L100RSB	SKF
11	12.7 mm	33.35 mm	Rough stock bore	PHP11L050RSB	SKF
11	19 mm	33.35 mm	Rough stock bore	PHP11L075RSB	SKF
11	25.4 mm	33.35 mm	Rough stock bore	PHP11L100RSB	SKF
12	12.7 mm	36.38 mm	Rough stock bore	PHP12L050RSB	SKF
12	19 mm	36.38 mm	Rough stock bore	PHP12L075RSB	SKF
12	25.4 mm	36.38 mm	Rough stock bore	PHP12L100RSB	SKF
13	12.7 mm	39.41 mm	Rough stock bore	PHP13L050RSB	SKF
13	19 mm	39.41 mm	Rough stock bore	PHP13L075RSB	SKF
13	25.4 mm	39.41 mm	Rough stock bore	PHP13L100RSB	SKF
14	12.7 mm	42.45 mm	Rough stock bore	PHP14L050RSB	SKF
14	19 mm	42.45 mm	Rough stock bore	PHP14L075RSB	SKF
14	25.4 mm	42.45 mm	Rough stock bore	PHP14L100RSB	SKF
15	12.7 mm	45.48 mm	Rough stock bore	PHP15L050RSB	SKF
15	19 mm	45.48 mm	Rough stock bore	PHP15L075RSB	SKF
15	25.4 mm	45.48 mm	Rough stock bore	PHP15L100RSB	SKF
16	12.7 mm	48.51 mm	Rough stock bore	PHP16L050RSB	SKF
16	19 mm	48.51 mm	Rough stock bore	PHP16L075RSB	SKF
16	25.4 mm	48.51 mm	Rough stock bore	PHP16L100RSB	SKF
17	12.7 mm	51.54 mm	Rough stock bore	PHP17L050RSB	SKF
17	19 mm	51.54 mm	Rough stock bore	PHP17L075RSB	SKF
17	25.4 mm	51.54 mm	Rough stock bore	PHP17L100RSB	SKF
18	12.7 mm	54.57 mm	Rough stock bore	PHP18L050RSB	SKF
18	12.7 mm	54.57 mm	Taper bush	PHP18L050TB	SKF
18	19 mm	54.57 mm	Rough stock bore	PHP18L075RSB	SKF
18	19 mm	54.57 mm	Taper bush	PHP18L075TB	SKF
18	25.4 mm	54.57 mm	Rough stock bore	PHP18L100RSB	SKF
18	25.4 mm	54.57 mm	Taper bush	PHP18L100TB	SKF
19	12.7 mm	57.61 mm	Rough stock bore	PHP19L050RSB	SKF
19	12.7 mm	57.61 mm	Taper bush	PHP19L050TB	SKF
19	19 mm	57.61 mm	Rough stock bore	PHP19L075RSB	SKF
19	19 mm	57.61 mm	Taper bush	PHP19L075TB	SKF
19	25.4 mm	57.61 mm	Rough stock bore	PHP19L100RSB	SKF
19	25.4 mm	57.61 mm	Taper bush	PHP19L100TB	SKF
20	12.7 mm	60.64 mm	Rough stock bore	PHP20L050RSB	SKF
20	12.7 mm	60.64 mm	Taper bush	PHP20L050TB	SKF
20	19 mm	60.64 mm	Rough stock bore	PHP20L075RSB	SKF
20	19 mm	60.64 mm	Taper bush	PHP20L075TB	SKF
20	25.4 mm	60.64 mm	Rough stock bore	PHP20L100RSB	SKF
20	25.4 mm	60.64 mm	Taper bush	PHP20L100TB	SKF
21	12.7 mm	63.67 mm	Rough stock bore	PHP21L050RSB	SKF
21	12.7 mm	63.67 mm	Taper bush	PHP21L050TB	SKF
21	19 mm	63.67 mm	Rough stock bore	PHP21L075RSB	SKF
21	19 mm	63.67 mm	Taper bush	PHP21L075TB	SKF
21	25.4 mm	63.67 mm	Rough stock bore	PHP21L100RSB	SKF
21	25.4 mm	63.67 mm	Taper bush	PHP21L100TB	SKF
22	12.7 mm	66.7 mm	Rough stock bore	PHP22L050RSB	SKF
22	12.7 mm	66.7 mm	Taper bush	PHP22L050TB	SKF
22	19 mm	66.7 mm	Rough stock bore	PHP22L075RSB	SKF
22	19 mm	66.7 mm	Taper bush	PHP22L075TB	SKF
22	25.4 mm	66.7 mm	Rough stock bore	PHP22L100RSB	SKF
22	25.4 mm	66.7 mm	Taper bush	PHP22L100TB	SKF
23	12.7 mm	69.73 mm	Rough stock bore	PHP23L050RSB	SKF
23	12.7 mm	69.73 mm	Taper bush	PHP23L050TB	SKF
23	19 mm	69.73 mm	Rough stock bore	PHP23L075RSB	SKF
23	19 mm	69.73 mm	Taper bush	PHP23L075TB	SKF
23	25.4 mm	69.73 mm	Rough stock bore	PHP23L100RSB	SKF
23	25.4 mm	69.73 mm	Taper bush	PHP23L100TB	SKF
24	12.7 mm	72.77 mm	Rough stock bore	PHP24L050RSB	SKF
24	12.7 mm	72.77 mm	Taper bush	PHP24L050TB	SKF
24	19 mm	72.77 mm	Rough stock bore	PHP24L075RSB	SKF
24	19 mm	72.77 mm	Taper bush	PHP24L075TB	SKF
24	25.4 mm	72.77 mm	Rough stock bore	PHP24L100RSB	SKF
24	25.4 mm	72.77 mm	Taper bush	PHP24L100TB	SKF
25	12.7 mm	75.8 mm	Rough stock bore	PHP25L050RSB	SKF
25	12.7 mm	75.8 mm	Taper bush	PHP25L050TB	SKF
25	19 mm	75.8 mm	Rough stock bore	PHP25L075RSB	SKF
25	19 mm	75.8 mm	Taper bush	PHP25L075TB	SKF
25	25.4 mm	75.8 mm	Rough stock bore	PHP25L100RSB	SKF
25	25.4 mm	75.8 mm	Taper bush	PHP25L100TB	SKF
26	12.7 mm	78.83 mm	Rough stock bore	PHP26L050RSB	SKF
26	12.7 mm	78.83 mm	Taper bush	PHP26L050TB	SKF
26	19 mm	78.83 mm	Rough stock bore	PHP26L075RSB	SKF
26	19 mm	78.83 mm	Taper bush	PHP26L075TB	SKF
26	25.4 mm	78.83 mm	Rough stock bore	PHP26L100RSB	SKF
26	25.4 mm	78.83 mm	Taper bush	PHP26L100TB	SKF
27	12.7 mm	81.86 mm	Rough stock bore	PHP27L050RSB	SKF
27	12.7 mm	81.86 mm	Taper bush	PHP27L050TB	SKF
27	19 mm	81.86 mm	Rough stock bore	PHP27L075RSB	SKF
27	19 mm	81.86 mm	Taper bush	PHP27L075TB	SKF
27	25.4 mm	81.86 mm	Rough stock bore	PHP27L100RSB	SKF
27	25.4 mm	81.86 mm	Taper bush	PHP27L100TB	SKF
28	12.7 mm	84.89 mm	Rough stock bore	PHP28L050RSB	SKF
28	12.7 mm	84.89 mm	Taper bush	PHP28L050TB	SKF
28	19 mm	84.89 mm	Rough stock bore	PHP28L075RSB	SKF
28	19 mm	84.89 mm	Taper bush	PHP28L075TB	SKF
28	25.4 mm	84.89 mm	Rough stock bore	PHP28L100RSB	SKF
28	25.4 mm	84.89 mm	Taper bush	PHP28L100TB	SKF
29	12.7 mm	87.93 mm	Rough stock bore	PHP29L050RSB	SKF
29	19 mm	87.93 mm	Rough stock bore	PHP29L075RSB	SKF
29	25.4 mm	87.93 mm	Rough stock bore	PHP29L100RSB	SKF
30	12.7 mm	90.96 mm	Rough stock bore	PHP30L050RSB	SKF
30	12.7 mm	90.06 mm	Taper bush	PHP30L050TB	SKF
30	19 mm	90.96 mm	Rough stock bore	PHP30L075RSB	SKF
30	19 mm	90.96 mm	Taper bush	PHP30L075TB	SKF
30	25.4 mm	90.96 mm	Rough stock bore	PHP30L100RSB	SKF
30	25.4 mm	90.96 mm	Taper bush	PHP30L100TB	SKF
31	12.7 mm	93.99 mm	Rough stock bore	PHP31L050RSB	SKF
31	19 mm	93.99 mm	Rough stock bore	PHP31L075RSB	SKF
32	12.7 mm	97.02 mm	Rough stock bore	PHP32L050RSB	SKF
32	12.7 mm	97.02 mm	Taper bush	PHP32L050TB	SKF
32	19 mm	97.02 mm	Rough stock bore	PHP32L075RSB	SKF
32	19 mm	97.02 mm	Taper bush	PHP32L075TB	SKF
32	25.4 mm	97.02 mm	Rough stock bore	PHP32L100RSB	SKF
32	25.4 mm	97.02 mm	Taper bush	PHP32L100TB	SKF
33	12.7 mm	100.05 mm	Rough stock bore	PHP33L050RSB	SKF
33	19 mm	100.05 mm	Rough stock bore	PHP33L075RSB	SKF
33	25.4 mm	100.05 mm	Rough stock bore	PHP33L100RSB	SKF
34	12.7 mm	103.08 mm	Rough stock bore	PHP34L050RSB	SKF
34	19 mm	103.08 mm	Rough stock bore	PHP34L075RSB	SKF
34	25.4 mm	103.08 mm	Rough stock bore	PHP34L100RSB	SKF
35	12.7 mm	106.12 mm	Rough stock bore	PHP35L050RSB	SKF
35	19 mm	106.12 mm	Rough stock bore	PHP35L075RSB	SKF
35	25.4 mm	106.12 mm	Rough stock bore	PHP35L100RSB	SKF
36	12.7 mm	109.15 mm	Rough stock bore	PHP36L050RSB	SKF
36	12.7 mm	109.15 mm	Taper bush	PHP36L050TB	SKF
36	19 mm	109.15 mm	Rough stock bore	PHP36L075RSB	SKF
36	19 mm	109.15 mm	Taper bush	PHP36L075TB	SKF
36	25.4 mm	109.15 mm	Rough stock bore	PHP36L100RSB	SKF
36	25.4 mm	109.15 mm	Taper bush	PHP36L100TB	SKF
38	12.7 mm	115.21 mm	Rough stock bore	PHP38L050RSB	SKF
38	19 mm	115.21 mm	Rough stock bore	PHP38L075RSB	SKF
38	25.4 mm	115.21 mm	Rough stock bore	PHP38L100RSB	SKF
40	12.7 mm	121.28 mm	Rough stock bore	PHP40L050RSB	SKF
40	12.7 mm	121.28 mm	Taper bush	PHP40L050TB	SKF
40	19 mm	121.28 mm	Rough stock bore	PHP40L075RSB	SKF
40	19 mm	121.28 mm	Taper bush	PHP40L075TB	SKF
40	25.4 mm	121.28 mm	Rough stock bore	PHP40L100RSB	SKF
40	25.4 mm	121.28 mm	Taper bush	PHP40L100TB	SKF
42	12.7 mm	127.34 mm	Rough stock bore	PHP42L050RSB	SKF
42	19 mm	127.34 mm	Rough stock bore	PHP42L075RSB	SKF
42	25.4 mm	127.34 mm	Rough stock bore	PHP42L100RSB	SKF
44	12.7 mm	133.4 mm	Rough stock bore	PHP44L050RSB	SKF
44	12.7 mm	133.4 mm	Taper bush	PHP44L050TB	SKF
44	19 mm	133.4 mm	Rough stock bore	PHP44L075RSB	SKF
44	19 mm	133.4 mm	Taper bush	PHP44L075TB	SKF
44	25.4 mm	133.4 mm	Rough stock bore	PHP44L100RSB	SKF
44	25.4 mm	133.4 mm	Taper bush	PHP44L100TB	SKF
45	12.7 mm	136.44 mm	Rough stock bore	PHP45L050RSB	SKF
45	19 mm	136.44 mm	Rough stock bore	PHP45L075RSB	SKF
45	25.4 mm	136.44 mm	Rough stock bore	PHP45L100RSB	SKF
48	12.7 mm	145.53 mm	Rough stock bore	PHP48L050RSB	SKF
48	12.7 mm	145.53 mm	Taper bush	PHP48L050TB	SKF
48	19 mm	145.53 mm	Rough stock bore	PHP48L075RSB	SKF
48	19 mm	145.53 mm	Taper bush	PHP48L075TB	SKF
48	25.4 mm	145.53 mm	Rough stock bore	PHP48L100RSB	SKF
48	25.4 mm	145.53 mm	Taper bush	PHP48L100TB	SKF
50	12.7 mm	151.6 mm	Rough stock bore	PHP50L050RSB	SKF
50	19 mm	151.6 mm	Rough stock bore	PHP50L075RSB	SKF
50	25.4 mm	151.6 mm	Rough stock bore	PHP50L100RSB	SKF
52	12.7 mm	157.66 mm	Rough stock bore	PHP52L050RSB	SKF
52	19 mm	157.66 mm	Rough stock bore	PHP52L075RSB	SKF
52	25.4 mm	157.66 mm	Rough stock bore	PHP52L100RSB	SKF
56	12.7 mm	169.79 mm	Rough stock bore	PHP56L050RSB	SKF
56	19 mm	169.79 mm	Rough stock bore	PHP56L075RSB	SKF
56	25.4 mm	169.79 mm	Rough stock bore	PHP56L100RSB	SKF
57	12.7 mm	172.82 mm	Rough stock bore	PHP57L050RSB	SKF
57	19 mm	172.82 mm	Rough stock bore	PHP57L075RSB	SKF
57	25.4 mm	172.82 mm	Rough stock bore	PHP57L100RSB	SKF
60	12.7 mm	191.91 mm	Rough stock bore	PHP60L050RSB	SKF
60	12.7 mm	181.91 mm	Taper bush	PHP60L050TB	SKF
60	19 mm	181.91 mm	Rough stock bore	PHP60L075RSB	SKF
60	19 mm	181.91 mm	Taper bush	PHP60L075TB	SKF
60	25.4 mm	191.91 mm	Rough stock bore	PHP60L100RSB	SKF
60	25.4 mm	181.91 mm	Taper bush	PHP60L100TB	SKF
72	12.7 mm	218.3 mm	Rough stock bore	PHP72L050RSB	SKF
72	12.7 mm	218.3 mm	Taper bush	PHP72L050TB	SKF
72	19 mm	218.3 mm	Rough stock bore	PHP72L075RSB	SKF
72	19 mm	218.3 mm	Taper bush	PHP72L075TB	SKF
72	25.4 mm	218.3 mm	Rough stock bore	PHP72L100RSB	SKF
72	25.4 mm	218.3 mm	Taper bush	PHP72L100TB	SKF
76	12.7 mm	230.43 mm	Rough stock bore	PHP76L050RSB	SKF
76	19 mm	230.43 mm	Rough stock bore	PHP76L075RSB	SKF
76	25.4 mm	230.43 mm	Rough stock bore	PHP76L100RSB	SKF
84	12.7 mm	254.68 mm	Rough stock bore	PHP84L050RSB	SKF
84	12.7 mm	254.68 mm	Taper bush	PHP84L050TB	SKF
84	19 mm	254.67 mm	Rough stock bore	PHP84L075RSB	SKF
84	19 mm	254.68 mm	Taper bush	PHP84L075TB	SKF

H pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
14	19 mm	56.6 mm	Rough stock bore	PHP14H075RSB	SKF
14	19 mm	56.6 mm	Taper bush	PHP14H075TB	SKF
14	25.4 mm	56.6 mm	Rough stock bore	PHP14H100RSB	SKF
14	25.4 mm	56.6 mm	Taper bush	PHP14H100TB	SKF
14	38.1 mm	56.6 mm	Rough stock bore	PHP14H150RSB	SKF
14	38.1 mm	56.6 mm	Taper bush	PHP14H150TB	SKF
14	50.8 mm	56.6 mm	Rough stock bore	PHP14H200RSB	SKF
14	76.2 mm	56.6 mm	Rough stock bore	PHP14H300RSB	SKF
15	19 mm	60.64 mm	Rough stock bore	PHP15H075RSB	SKF
15	19 mm	60.64 mm	Taper bush	PHP15H075TB	SKF
15	25.4 mm	60.64 mm	Rough stock bore	PHP15H100RSB	SKF
15	25.4 mm	60.6 mm	Taper bush	PHP15H100TB	SKF
15	38.1 mm	60.64 mm	Rough stock bore	PHP15H150RSB	SKF
15	50.8 mm	60.64 mm	Rough stock bore	PHP15H200RSB	SKF
15	76.2 mm	60.64 mm	Rough stock bore	PHP15H300RSB	SKF
16	19 mm	64.68 mm	Rough stock bore	PHP16H075RSB	SKF
16	19 mm	64.67 mm	Taper bush	PHP16H075TB	SKF
16	25.4 mm	64.67 mm	Rough stock bore	PHP16H100RSB	SKF
16	25.4 mm	64.7 mm	Taper bush	PHP16H100TB	SKF
16	38.1 mm	64.67 mm	Rough stock bore	PHP16H150RSB	SKF
16	38.1 mm	64.67 mm	Taper bush	PHP16H150TB	SKF
16	50.8 mm	64.67 mm	Rough stock bore	PHP16H200RSB	SKF
16	50.8 mm	64.57 mm	Taper bush	PHP16H200TB	SKF
16	76.2 mm	64.67 mm	Rough stock bore	PHP16H300RSB	SKF
17	19 mm	68.72 mm	Rough stock bore	PHP17H075RSB	SKF
17	19 mm	68.72 mm	Taper bush	PHP17H075TB	SKF
17	25.4 mm	68.72 mm	Rough stock bore	PHP17H100RSB	SKF
17	25.4 mm	68.7 mm	Taper bush	PHP17H100TB	SKF
17	38.1 mm	68.72 mm	Rough stock bore	PHP17H150RSB	SKF
17	50.8 mm	68.72 mm	Rough stock bore	PHP17H200RSB	SKF
17	76.2 mm	68.72 mm	Rough stock bore	PHP17H300RSB	SKF
18	19 mm	72.77 mm	Rough stock bore	PHP18H075RSB	SKF
18	19 mm	72.77 mm	Taper bush	PHP18H075TB	SKF
18	25.4 mm	72.77 mm	Rough stock bore	PHP18H100RSB	SKF
18	25.4 mm	72.8 mm	Taper bush	PHP18H100TB	SKF
18	38.1 mm	72.77 mm	Rough stock bore	PHP18H150RSB	SKF
18	38.1 mm	72.77 mm	Taper bush	PHP18H150TB	SKF
18	50.8 mm	72.77 mm	Rough stock bore	PHP18H200RSB	SKF
18	50.8 mm	72.77 mm	Taper bush	PHP18H200TB	SKF
18	76.2 mm	72.77 mm	Rough stock bore	PHP18H300RSB	SKF
18	76.2 mm	72.77 mm	Taper bush	PHP18H300TB	SKF
19	19 mm	76.81 mm	Rough stock bore	PHP19H075RSB	SKF
19	19 mm	76.81 mm	Taper bush	PHP19H075TB	SKF
19	25.4 mm	76.81 mm	Rough stock bore	PHP19H100RSB	SKF
19	25.4 mm	76.8 mm	Taper bush	PHP19H100TB	SKF
19	38.1 mm	76.81 mm	Rough stock bore	PHP19H150RSB	SKF
19	38.1 mm	76.81 mm	Taper bush	PHP19H150TB	SKF
19	50.8 mm	76.81 mm	Rough stock bore	PHP19H200RSB	SKF
19	50.8 mm	76.81 mm	Taper bush	PHP19H200TB	SKF
19	76.2 mm	76.81 mm	Rough stock bore	PHP19H300RSB	SKF
20	19 mm	80.85 mm	Rough stock bore	PHP20H075RSB	SKF
20	19 mm	80.85 mm	Taper bush	PHP20H075TB	SKF
20	25.4 mm	80.85 mm	Rough stock bore	PHP20H100RSB	SKF
20	25.4 mm	80.8 mm	Taper bush	PHP20H100TB	SKF
20	38.1 mm	80.85 mm	Rough stock bore	PHP20H150RSB	SKF
20	38.1 mm	80.85 mm	Taper bush	PHP20H150TB	SKF
20	50.8 mm	80.85 mm	Rough stock bore	PHP20H200RSB	SKF
20	50.8 mm	80.85 mm	Taper bush	PHP20H200TB	SKF
20	76.2 mm	80.85 mm	Rough stock bore	PHP20H300RSB	SKF
20	76.2 mm	80.85 mm	Taper bush	PHP20H300TB	SKF
21	19 mm	84.89 mm	Rough stock bore	PHP21H075RSB	SKF
21	19 mm	84.89 mm	Taper bush	PHP21H075TB	SKF
21	25.4 mm	84.89 mm	Rough stock bore	PHP21H100RSB	SKF
21	25.4 mm	84.9 mm	Taper bush	PHP21H100TB	SKF
21	38.1 mm	84.89 mm	Rough stock bore	PHP21H150RSB	SKF
21	38.1 mm	84.89 mm	Taper bush	PHP21H150TB	SKF
21	50.8 mm	84.89 mm	Rough stock bore	PHP21H200RSB	SKF
21	50.8 mm	84.89 mm	Taper bush	PHP21H200TB	SKF
21	76.2 mm	84.89 mm	Rough stock bore	PHP21H300RSB	SKF
21	76.2 mm	84.89 mm	Taper bush	PHP21H300TB	SKF
22	19 mm	88.94 mm	Rough stock bore	PHP22H075RSB	SKF
22	19 mm	88.94 mm	Taper bush	PHP22H075TB	SKF
22	25.4 mm	88.94 mm	Rough stock bore	PHP22H100RSB	SKF
22	25.4 mm	88.9 mm	Taper bush	PHP22H100TB	SKF
22	38.1 mm	88.94 mm	Rough stock bore	PHP22H150RSB	SKF
22	38.1 mm	88.94 mm	Taper bush	PHP22H150TB	SKF
22	50.8 mm	88.94 mm	Rough stock bore	PHP22H200RSB	SKF
22	50.8 mm	88.94 mm	Taper bush	PHP22H200TB	SKF
22	76.2 mm	88.94 mm	Rough stock bore	PHP22H300RSB	SKF
22	76.2 mm	88.94 mm	Taper bush	PHP22H300TB	SKF
23	19 mm	92.98 mm	Rough stock bore	PHP23H075RSB	SKF
23	19 mm	92.98 mm	Taper bush	PHP23H075TB	SKF
23	25.4 mm	92.98 mm	Rough stock bore	PHP23H100RSB	SKF
23	25.4 mm	93 mm	Taper bush	PHP23H100TB	SKF
23	38.1 mm	92.98 mm	Rough stock bore	PHP23H150RSB	SKF
23	38.1 mm	92.98 mm	Taper bush	PHP23H150TB	SKF
23	50.8 mm	92.98 mm	Rough stock bore	PHP23H200RSB	SKF
23	50.8 mm	92.98 mm	Taper bush	PHP23H200TB	SKF
23	76.2 mm	92.98 mm	Rough stock bore	PHP23H300RSB	SKF
23	76.2 mm	92.98 mm	Taper bush	PHP23H300TB	SKF
24	19 mm	97.02 mm	Rough stock bore	PHP24H075RSB	SKF
24	19 mm	97.02 mm	Taper bush	PHP24H075TB	SKF
24	25.4 mm	97.03 mm	Rough stock bore	PHP24H100RSB	SKF
24	25.4 mm	97 mm	Taper bush	PHP24H100TB	SKF
24	38.1 mm	97.03 mm	Rough stock bore	PHP24H150RSB	SKF
24	38.1 mm	97.02 mm	Taper bush	PHP24H150TB	SKF
24	50.8 mm	97.03 mm	Rough stock bore	PHP24H200RSB	SKF
24	50.8 mm	97.02 mm	Taper bush	PHP24H200TB	SKF
24	76.2 mm	97.03 mm	Rough stock bore	PHP24H300RSB	SKF
24	76.2 mm	97.02 mm	Taper bush	PHP24H300TB	SKF
25	19 mm	101.06 mm	Rough stock bore	PHP25H075RSB	SKF
25	19 mm	101.06 mm	Taper bush	PHP25H075TB	SKF
25	25.4 mm	101.06 mm	Rough stock bore	PHP25H100RSB	SKF
25	25.4 mm	101.1 mm	Taper bush	PHP25H100TB	SKF
25	38.1 mm	101.06 mm	Rough stock bore	PHP25H150RSB	SKF
25	38.1 mm	101.06 mm	Taper bush	PHP25H150TB	SKF
25	50.8 mm	101.06 mm	Rough stock bore	PHP25H200RSB	SKF
25	50.8 mm	101.06 mm	Taper bush	PHP25H200TB	SKF
25	76.2 mm	101.06 mm	Rough stock bore	PHP25H300RSB	SKF
25	76.2 mm	101.06 mm	Taper bush	PHP25H300TB	SKF
26	19 mm	105.11 mm	Rough stock bore	PHP26H075RSB	SKF
26	19 mm	105.11 mm	Taper bush	PHP26H075TB	SKF
26	25.4 mm	105.11 mm	Rough stock bore	PHP26H100RSB	SKF
26	25.4 mm	105.1 mm	Taper bush	PHP26H100TB	SKF
26	38.1 mm	105.11 mm	Rough stock bore	PHP26H150RSB	SKF
26	38.1 mm	105.11 mm	Taper bush	PHP26H150TB	SKF
26	50.8 mm	105.11 mm	Rough stock bore	PHP26H200RSB	SKF
26	50.8 mm	105.11 mm	Taper bush	PHP26H200TB	SKF
26	76.2 mm	105.11 mm	Rough stock bore	PHP26H300RSB	SKF
26	76.2 mm	105.11 mm	Taper bush	PHP26H300TB	SKF
27	19 mm	109.15 mm	Rough stock bore	PHP27H075RSB	SKF
27	19 mm	109.15 mm	Taper bush	PHP27H075TB	SKF
27	25.4 mm	109.15 mm	Rough stock bore	PHP27H100RSB	SKF
27	25.4 mm	109.2 mm	Taper bush	PHP27H100TB	SKF
27	38.1 mm	109.15 mm	Rough stock bore	PHP27H150RSB	SKF
27	38.1 mm	109.15 mm	Taper bush	PHP27H150TB	SKF
27	50.8 mm	109.15 mm	Rough stock bore	PHP27H200RSB	SKF
27	50.8 mm	109.15 mm	Taper bush	PHP27H200TB	SKF
27	76.2 mm	109.15 mm	Rough stock bore	PHP27H300RSB	SKF
27	76.2 mm	109.15 mm	Taper bush	PHP27H300TB	SKF
28	19 mm	113.19 mm	Rough stock bore	PHP28H075RSB	SKF
28	19 mm	113.19 mm	Taper bush	PHP28H075TB	SKF
28	25.4 mm	113.18 mm	Rough stock bore	PHP28H100RSB	SKF
28	25.4 mm	113.2 mm	Taper bush	PHP28H100TB	SKF
28	38.1 mm	113.18 mm	Rough stock bore	PHP28H150RSB	SKF
28	38.1 mm	113.19 mm	Taper bush	PHP28H150TB	SKF
28	50.8 mm	113.18 mm	Rough stock bore	PHP28H200RSB	SKF
28	50.8 mm	113.19 mm	Taper bush	PHP28H200TB	SKF
28	76.2 mm	113.18 mm	Rough stock bore	PHP28H300RSB	SKF
28	76.2 mm	113.19 mm	Taper bush	PHP28H300TB	SKF
29	19 mm	117.23 mm	Rough stock bore	PHP29H075RSB	SKF
29	19 mm	117.23 mm	Taper bush	PHP29H075TB	SKF
29	25.4 mm	117.23 mm	Rough stock bore	PHP29H100RSB	SKF
29	38.1 mm	117.23 mm	Rough stock bore	PHP29H150RSB	SKF
29	50.8 mm	117.23 mm	Rough stock bore	PHP29H200RSB	SKF
29	76.2 mm	117.23 mm	Rough stock bore	PHP29H300RSB	SKF
30	19 mm	121.28 mm	Rough stock bore	PHP30H075RSB	SKF
30	19 mm	121.28 mm	Taper bush	PHP30H075TB	SKF
30	25.4 mm	121.29 mm	Rough stock bore	PHP30H100RSB	SKF
30	25.4 mm	121.3 mm	Taper bush	PHP30H100TB	SKF
30	38.1 mm	121.29 mm	Rough stock bore	PHP30H150RSB	SKF
30	38.1 mm	121.28 mm	Taper bush	PHP30H150TB	SKF
30	50.8 mm	121.29 mm	Rough stock bore	PHP30H200RSB	SKF
30	50.8 mm	121.28 mm	Taper bush	PHP30H200TB	SKF
30	76.2 mm	121.29 mm	Rough stock bore	PHP30H300RSB	SKF
30	76.2 mm	121.28 mm	Taper bush	PHP30H300TB	SKF
31	19 mm	125.32 mm	Rough stock bore	PHP31H075RSB	SKF
31	25.4 mm	125.32 mm	Rough stock bore	PHP31H100RSB	SKF
31	38.1 mm	125.32 mm	Rough stock bore	PHP31H150RSB	SKF
31	50.8 mm	125.32 mm	Rough stock bore	PHP31H200RSB	SKF
31	76.2 mm	125.32 mm	Rough stock bore	PHP31H300RSB	SKF
32	19 mm	129.36 mm	Rough stock bore	PHP32H075RSB	SKF
32	19 mm	129.36 mm	Taper bush	PHP32H075TB	SKF
32	25.4 mm	129.36 mm	Rough stock bore	PHP32H100RSB	SKF
32	25.4 mm	129.4 mm	Taper bush	PHP32H100TB	SKF
32	38.1 mm	129.36 mm	Rough stock bore	PHP32H150RSB	SKF
32	38.1 mm	129.36 mm	Taper bush	PHP32H150TB	SKF
32	50.8 mm	129.36 mm	Rough stock bore	PHP32H200RSB	SKF
32	50.8 mm	129.36 mm	Taper bush	PHP32H200TB	SKF
32	76.2 mm	129.36 mm	Rough stock bore	PHP32H300RSB	SKF
32	76.2 mm	129.36 mm	Taper bush	PHP32H300TB	SKF
33	19 mm	133.4 mm	Rough stock bore	PHP33H075RSB	SKF
33	19 mm	133.4 mm	Taper bush	PHP33H075TB	SKF
33	25.4 mm	133.4 mm	Rough stock bore	PHP33H100RSB	SKF
33	38.1 mm	133.4 mm	Rough stock bore	PHP33H150RSB	SKF
33	50.8 mm	133.4 mm	Rough stock bore	PHP33H200RSB	SKF
33	76.2 mm	133.4 mm	Rough stock bore	PHP33H300RSB	SKF
34	19 mm	137.45 mm	Rough stock bore	PHP34H075RSB	SKF
34	19 mm	137.45 mm	Taper bush	PHP34H075TB	SKF
34	25.4 mm	137.45 mm	Rough stock bore	PHP34H100RSB	SKF

XH pitch

Teeth	Belt width	Pitch diameter	Mounting	Part number	Brand
18	50.8 mm	127.34 mm	Rough stock bore	PHP18XH200RSB	SKF
18	50.8 mm	127.34 mm	Taper bush	PHP18XH200TB	SKF
18	76.2 mm	127.34 mm	Rough stock bore	PHP18XH300RSB	SKF
18	76.2 mm	127.34 mm	Taper bush	PHP18XH300TB	SKF
18	101.6 mm	127.34 mm	Rough stock bore	PHP18XH400RSB	SKF
18	101.6 mm	127.34 mm	Taper bush	PHP18XH400TB	SKF
19	50.8 mm	134.41 mm	Rough stock bore	PHP19XH200RSB	SKF
19	50.8 mm	134.41 mm	Taper bush	PHP19XH200TB	SKF
19	76.2 mm	134.41 mm	Rough stock bore	PHP19XH300RSB	SKF
19	76.2 mm	134.41 mm	Taper bush	PHP19XH300TB	SKF
19	101.6 mm	134.41 mm	Rough stock bore	PHP19XH400RSB	SKF
19	101.6 mm	134.41 mm	Taper bush	PHP19XH400TB	SKF
20	50.8 mm	141.49 mm	Rough stock bore	PHP20XH200RSB	SKF
20	50.8 mm	141.49 mm	Taper bush	PHP20XH200TB	SKF
20	76.2 mm	141.49 mm	Rough stock bore	PHP20XH300RSB	SKF
20	76.2 mm	141.49 mm	Taper bush	PHP20XH300TB	SKF
20	101.6 mm	141.49 mm	Rough stock bore	PHP20XH400RSB	SKF
20	101.6 mm	141.49 mm	Taper bush	PHP20XH400TB	SKF
21	50.8 mm	148.56 mm	Rough stock bore	PHP21XH200RSB	SKF
21	50.8 mm	148.56 mm	Taper bush	PHP21XH200TB	SKF
21	76.2 mm	148.56 mm	Rough stock bore	PHP21XH300RSB	SKF
21	76.2 mm	148.56 mm	Taper bush	PHP21XH300TB	SKF
21	101.6 mm	148.56 mm	Rough stock bore	PHP21XH400RSB	SKF
21	101.6 mm	148.56 mm	Taper bush	PHP21XH400TB	SKF
22	50.8 mm	155.64 mm	Rough stock bore	PHP22XH200RSB	SKF
22	50.8 mm	155.64 mm	Taper bush	PHP22XH200TB	SKF
22	76.2 mm	155.64 mm	Rough stock bore	PHP22XH300RSB	SKF
22	76.2 mm	155.64 mm	Taper bush	PHP22XH300TB	SKF
22	101.6 mm	155.64 mm	Rough stock bore	PHP22XH400RSB	SKF
22	101.6 mm	155.64 mm	Taper bush	PHP22XH400TB	SKF
24	50.8 mm	169.79 mm	Rough stock bore	PHP24XH200RSB	SKF
24	50.8 mm	169.79 mm	Taper bush	PHP24XH200TB	SKF
24	76.2 mm	169.79 mm	Rough stock bore	PHP24XH300RSB	SKF
24	76.2 mm	169.79 mm	Taper bush	PHP24XH300TB	SKF
24	101.6 mm	169.79 mm	Rough stock bore	PHP24XH400RSB	SKF
24	101.6 mm	169.79 mm	Taper bush	PHP24XH400TB	SKF
25	50.8 mm	176.86 mm	Rough stock bore	PHP25XH200RSB	SKF
25	50.8 mm	176.86 mm	Taper bush	PHP25XH200TB	SKF
25	76.2 mm	176.86 mm	Rough stock bore	PHP25XH300RSB	SKF
25	76.2 mm	176.86 mm	Taper bush	PHP25XH300TB	SKF
25	101.6 mm	176.86 mm	Rough stock bore	PHP25XH400RSB	SKF
25	101.6 mm	176.86 mm	Taper bush	PHP25XH400TB	SKF
26	50.8 mm	183.93 mm	Rough stock bore	PHP26XH200RSB	SKF
26	50.8 mm	183.93 mm	Taper bush	PHP26XH200TB	SKF
26	76.2 mm	183.93 mm	Rough stock bore	PHP26XH300RSB	SKF
26	76.2 mm	183.93 mm	Taper bush	PHP26XH300TB	SKF
26	101.6 mm	183.93 mm	Rough stock bore	PHP26XH400RSB	SKF
26	101.6 mm	183.93 mm	Taper bush	PHP26XH400TB	SKF
27	50.8 mm	191.01 mm	Rough stock bore	PHP27XH200RSB	SKF
27	50.8 mm	191.01 mm	Taper bush	PHP27XH200TB	SKF
27	76.2 mm	191.01 mm	Rough stock bore	PHP27XH300RSB	SKF
27	76.2 mm	191.01 mm	Taper bush	PHP27XH300TB	SKF
27	101.6 mm	191.01 mm	Rough stock bore	PHP27XH400RSB	SKF
27	101.6 mm	191.01 mm	Taper bush	PHP27XH400TB	SKF
28	50.8 mm	198.09 mm	Rough stock bore	PHP28XH200RSB	SKF
28	50.8 mm	198.09 mm	Taper bush	PHP28XH200TB	SKF
28	76.2 mm	198.09 mm	Rough stock bore	PHP28XH300RSB	SKF
28	76.2 mm	198.09 mm	Taper bush	PHP28XH300TB	SKF
28	101.6 mm	198.09 mm	Rough stock bore	PHP28XH400RSB	SKF
28	101.6 mm	198.09 mm	Taper bush	PHP28XH400TB	SKF
30	50.8 mm	212.23 mm	Rough stock bore	PHP30XH200RSB	SKF
30	50.8 mm	212.23 mm	Taper bush	PHP30XH200TB	SKF
30	76.2 mm	212.23 mm	Rough stock bore	PHP30XH300RSB	SKF
30	76.2 mm	212.23 mm	Taper bush	PHP30XH300TB	SKF
30	101.6 mm	212.23 mm	Rough stock bore	PHP30XH400RSB	SKF
30	101.6 mm	212.23 mm	Taper bush	PHP30XH400TB	SKF
32	50.8 mm	226.38 mm	Rough stock bore	PHP32XH200RSB	SKF
32	50.8 mm	226.38 mm	Taper bush	PHP32XH200TB	SKF
32	76.2 mm	226.38 mm	Rough stock bore	PHP32XH300RSB	SKF
32	76.2 mm	226.38 mm	Taper bush	PHP32XH300TB	SKF
32	101.6 mm	226.38 mm	Rough stock bore	PHP32XH400RSB	SKF
32	101.6 mm	226.38 mm	Taper bush	PHP32XH400TB	SKF
34	50.8 mm	240.53 mm	Rough stock bore	PHP34XH200RSB	SKF
34	76.2 mm	240.53 mm	Rough stock bore	PHP34XH300RSB	SKF
34	101.6 mm	240.53 mm	Rough stock bore	PHP34XH400RSB	SKF
36	50.8 mm	254.64 mm	Taper bush	PHP36XH200TB	SKF
36	76.2 mm	254.64 mm	Taper bush	PHP36XH300TB	SKF
36	101.6 mm	254.64 mm	Taper bush	PHP36XH400TB	SKF
38	50.8 mm	268.83 mm	Rough stock bore	PHP38XH200RSB	SKF
38	76.2 mm	268.83 mm	Rough stock bore	PHP38XH300RSB	SKF
38	101.6 mm	268.83 mm	Rough stock bore	PHP38XH400RSB	SKF
40	50.8 mm	282.98 mm	Rough stock bore	PHP40XH200RSB	SKF
40	50.8 mm	282.98 mm	Taper bush	PHP40XH200TB	SKF
40	76.2 mm	282.98 mm	Rough stock bore	PHP40XH300RSB	SKF
40	76.2 mm	282.98 mm	Taper bush	PHP40XH300TB	SKF
40	101.6 mm	282.98 mm	Rough stock bore	PHP40XH400RSB	SKF
40	101.6 mm	282.98 mm	Taper bush	PHP40XH400TB	SKF
48	50.8 mm	339.57 mm	Rough stock bore	PHP48XH200RSB	SKF
48	50.8 mm	339.57 mm	Taper bush	PHP48XH200TB	SKF
48	76.2 mm	339.57 mm	Rough stock bore	PHP48XH300RSB	SKF
48	76.2 mm	339.57 mm	Taper bush	PHP48XH300TB	SKF
48	101.6 mm	339.57 mm	Rough stock bore	PHP48XH400RSB	SKF
48	101.6 mm	339.57 mm	Taper bush	PHP48XH400TB	SKF
60	50.8 mm	424.47 mm	Rough stock bore	PHP60XH200RSB	SKF
60	50.8 mm	424.47 mm	Taper bush	PHP60XH200TB	SKF
60	76.2 mm	424.47 mm	Rough stock bore	PHP60XH300RSB	SKF
60	76.2 mm	424.47 mm	Taper bush	PHP60XH300TB	SKF
60	101.6 mm	424.47 mm	Rough stock bore	PHP60XH400RSB	SKF
60	101.6 mm	424.47 mm	Taper bush	PHP60XH400TB	SKF

Part numbers and designations are those of the original manufacturers and are given for identification. cBallast is an independent supplier; confirm ratings against the nameplate of the installed equipment before ordering. Table generated from the cBallast catalogue on 2026-09-29.

Open / Download PDF

Compiled by cBallast for identification and cross-reference. Part numbers, designations and trademarks belong to their respective manufacturers. Confirm ratings and dimensions against the manufacturer's current documentation and the nameplate of the installed equipment before ordering or installation.