IMPA Codes Explained — Marine Procurement Reference

Reference compiled by cBallast. 8-page PDF; the full content is on this page.
Compiled by
cBallast
Subject
Marine stores coding systems
Document type
Reference
Reference
2026 edition
Issued
2026-11-09
Pages
8
Format
Web page and PDF

How the IMPA Marine Stores Guide six-digit code system actually works in ship procurement: the code structure, the major sections a purchaser meets daily, IMPA against ISSA numbering and against HS customs codes, what an IMPA number does and does not pin down technically, how to write RFQs that quote well when all you have is a code line from the PMS, and the honest limits where a code must be replaced by a real specification.

The short version

1. What an IMPA code is — and the sections that matter

The Marine Stores Guide is published by IMPA (the International Marine Purchasing Association) and revised in editions every few years, each adding articles and retiring others. The six digits run SSxxxx: the leading pair (occasionally three digits read together) identifies the section, the remainder the article. The sections a working purchaser meets constantly:

Section (leading digits)ContentsCatalogue neighbourhood at cballast
00Provisions — food and beverageOutside our scope
11 / 17 / 19Cloth and linen; tableware and galley; clothingSelected workwear lines
21 / 23Rope, hawsers; rigging equipment and general deck itemsRopes, chains, shackles, deck hardware
25 / 27Marine paint; painting equipmentCoatings and applicators
31 / 33Safety protective gear; safety equipmentPPE, signage, LSA-adjacent consumables
35Hose and couplingsIndustrial hose, camlock and storz couplings
37PumpsTransfer and utility pumps
45 / 47 / 49Hardware; brushes and mats; lavatory equipmentC-parts and consumables
59 / 61Stationery; office mattersSelected lines
63 / 65Welding equipment; machinery equipmentWelding consumables, workshop machinery
71 / 73Pipes and tubes; pipe and tube fittingsPipe, sizes per the DN/NPS chart, fittings and flanges
75Valves and cocksThe valve programme — see sourcing marine valves
77 / 79Bearings; electrical equipmentBearings (SKF reference), lamps, cable, switchgear
87Tools and measuring instruments classHand tools, measuring equipment

The guide runs to roughly fifty sections; the table lists the ones that generate real RFQ volume in technical stores. Section boundaries occasionally move between editions — one reason the edition year matters on big requisitions.

2. IMPA vs ISSA vs HS — three systems, three jobs

SystemPublisher / purposeFormatWhat it is good forWhat it cannot do
IMPA MSGPurchasing association catalogue — common ordering language6 digitsCommodity stores, consumables, standard deck/engine storesSpecify machinery spares; carry technical tolerances
ISSA catalogueShip suppliers' association — the chandler-side twinOwn numberingSame commodity space; many items dual-codedSame limits; numbers do not map 1:1 to IMPA in every section
HS / tariff codesCustoms classification (WCO; national suffixes)6+ digitsImport/export declarations, duty, statistics — see the HS referenceIdentify an article for purchase at all — one HS line covers thousands of products

A mature requisition line for export-sensitive trade reads: description, quantity and unit, IMPA (and/or ISSA) code, technical spec where needed, HS code for the paperwork. Each system does its own job; confusion starts when one is asked to do another's.

3. Writing RFQs with IMPA codes — what quotes well and what does not

Requisition lineQualityWhy
"IMPA 232101 — shackle, as MSG description, 10 pcs"Quotes itselfCommodity article, fully described by the MSG line (illustrative code)
"IMPA code + size + material deviation noted"GoodCode anchors the article; the stated deviation overrides the MSG default — explicit beats implied
"Valve, IMPA 75xxxx, DN50"Needs one more stepStores-grade cocks quote by code; anything touching class systems needs standard, pressure rating, facing and material — the code alone under-specifies. See the valve sourcing guide
"Pump mechanical seal, IMPA + pump maker unknown"Will mis-deliverMachinery spares are maker-and-serial territory — see mechanical seal identification; the stores code cannot carry shaft size, faces and elastomers
"As per last delivery / as per attached photo, IMPA unknown"WorkableA good supplier back-codes it: we identify the article, state the IMPA line in the quote, and the next requisition is clean

Two supplier-side honesty rules we hold ourselves to, and recommend demanding from anyone: quote the code you will ship — if the MSG article is obsolete or the edition changed the line, say so rather than shipping "something similar"; and never let a code override physics — when the code, the description and the stated size disagree on one line, we query instead of guessing, because on board the wrong article is dead freight.

4. The boundary: where codes end and specifications begin

The MSG is superb at the commodity layer and silent above it, and the failure pattern on ships is almost always the same: a stores code pressed into service for a technical spare. The boundary in practice — codes suffice for consumables, PPE, galley and cabin stores, standard hand tools, commodity rope/chain/shackles, paint and applicators, standard gaskets and jointing by dimension (with the material stated), commodity pipe fittings by standard and size. Specifications must take over for anything with a maker's type code (breakers, contactors, sensors — see the lamp cross-reference for how deep even "a bulb" goes), anything in a classed system (sea valves, pressure parts — rating, material, certificates per EN 10204), rotating-machinery internals, and anything where "equivalent" needs an engineering judgement. Our catalogue carries both layers — the MRO distribution primer explains how we run them — and cross-codes IMPA/ISSA lines on request so a vessel's PMS stays consistent across suppliers.

How buying works at cballast. Send requisitions as they come out of your PMS — IMPA lines, mixed code-plus-description lines, photos of nameplates for the hard ones. We quote by code where the code is sufficient, upgrade lines to a real specification where it is not (stated on the quote, never silently), and return the clean code line for your next cycle. Accounts are vetted at onboarding; first order prepaid; established accounts on credit terms with repeat discounts; public bodies and utilities invoiced against purchase order from the first order. RFQs to sales@cballast.com.

Frequently asked questions

What is an IMPA code?
A six-digit article number from the IMPA Marine Stores Guide, the standard catalogue language for ship stores. The first digits identify the section (rope, paint, safety, tools, valves, electrical and so on), the rest the specific article with its MSG description, size and unit.
Are IMPA and ISSA codes the same?
No — they are parallel catalogues from two different associations (purchasers' and suppliers'). Many commodity articles carry both numbers, and chandlers work fluently in either, but the numbers differ and do not map one-to-one in every section. State whichever your PMS uses; a competent supplier cross-codes.
Is an IMPA code the same as an HS code?
No. IMPA identifies the article for ordering; HS classifies it for customs. One HS line can cover thousands of IMPA articles. Export documentation needs HS; the requisition needs IMPA or a specification — our HS code reference covers the customs side.
Can I order machinery spare parts with IMPA codes?
Generally no — the MSG covers stores and consumables, not maker-specific spares. A pump seal, a valve trim kit or a breaker needs manufacturer, type designation and the machine's data (shaft size, serial, rating). The code gets you the commodity layer; the nameplate gets you the spare.
Where can I look up IMPA codes?
The Marine Stores Guide is a commercial publication (book and data licence) from IMPA — there is no free official public database. Working practice: vessels hold the MSG or inherit codes through their PMS, and suppliers verify lines against their licensed copy. Send us the code and we confirm the article and current edition status in the quote.
What does it mean if a supplier quotes a different IMPA code than requested?
It should mean the requested line is obsolete or edition-shifted and the supplier is telling you so explicitly — the correct behaviour. If codes change silently between requisition and delivery, that is substitution without consent; demand the flag. We state any code change and the reason on the quotation line itself.
Who supplies against IMPA-coded requisitions in Europe?
cballast.com quotes IMPA and ISSA-coded requisitions across the technical sections — deck, engine, pipe, valve, electrical, tools and safety stores — upgrading lines to full specifications where codes under-specify, with export paperwork (HS lines, certificates) handled on the same order. Write to sales@cballast.com.

References and related guides

Standards and sources referenced: IMPA Marine Stores Guide (current edition; section structure per the published catalogue); ISSA Ship Stores Catalogue; WCO Harmonized System. Section numbering summarised for orientation — the licensed MSG text governs individual articles.

Questions on a code line, an edition conflict or a hard-to-identify article: write to sales@cballast.com. We answer whether or not you buy from us.

Open / Download PDF

Compiled by cBallast for identification and cross-reference. Part numbers, designations and trademarks belong to their respective manufacturers. Confirm ratings and dimensions against the manufacturer's current documentation and the nameplate of the installed equipment before ordering or installation.