Siemens SIMATIC Spares — 6ES7, 6AV Codes and Migration

Guide compiled by cBallast. 8-page PDF; the full content is on this page.
Brand
Siemens
Subject
SIMATIC PLC and HMI systems
Document type
Guide
Reference
2026 edition
Issued
2026-11-10
Pages
8
Format
Web page and PDF

Keeping SIMATIC-controlled plants and vessels running through the S7-300/400 phase-out: how 6ES7, 6AV, 6EP and 6GK article numbers decode into family, size and generation, what the lifecycle stages (active, phase-out, spare-parts window) mean for a maintenance stock, like-for-like replacement rules including the firmware-revision trap, HMI replacement from classic panels to Comfort and Unified with the project-conversion reality stated honestly, memory cards and batteries, the migration paths to S7-1200/1500, and the spares-stocking logic that turns a dead module at sea into an hour of work instead of a charter party claim.

The short version

1. The article-number grammar

Prefix + digitsFamilyExamples from stockLifecycle posture
6ES721x / 6ES722x / 6ES723xS7-1200 (CPUs, SMs, SBs)Quoted by codeCurrent
6ES751x / 6ES752x / 6ES759xS7-1500 (CPUs, I/O, accessories)6ES7592-1AM00-0XB0 front connectorCurrent mainline
6ES73xxS7-300 (CPUs 312–319, SM/FM/CP modules)Quoted by codePhase-out era — stock the installed base
6ES74xxS7-400 (racks, CPUs, SMs)6ES7431-7KF00 analog input, 6ES7468 interface cablePhase-out era — long-lead mindset
6ES7193 / 6ES715xET 200SP / ET 200 distributed I/O6ES7193-6AP00 BaseUnit class, 6AP20 variantET 200SP current; older ET 200 families per their own clocks
6ES797xSystem accessories6ES7972-0DA00 (PROFIBUS-class accessory)Accessories die first and are cheapest to stock
6AV2123 / 6AV2124 / 6AV2128HMI: KTP Basic / Comfort / MTP UnifiedKTP400 Basic, MTP1000 UnifiedBasic/Unified current; classic OP/TP/MP legacy
6EPSITOP power suppliesQuoted by codeThe most-replaced article in any cabinet
6GKCPs, SCALANCE switchesQuoted by codeNetwork parts age with Ethernet generations

Suffix anatomy (the part after the dash, e.g. -0AA0 / -0XB0): design/revision coding. For reordering, quote the complete string from the module's own label — and the firmware version printed or readable in the engineering tool for CPUs and intelligent modules. A photo of the label beats any prose description; the Siemens LV code decoder covers the switchgear side of the same plant.

2. Lifecycle reality — reading the phase-out clock

StageWhat it meansMaintenance posture
Active productOrderable, developed, long horizonOrder as needed
Phase-out announced / product cancellationLast-order dates published; successors namedCensus the installed base NOW; lay in lifetime stock of the cheap failure-prone articles (PSUs, batteries, connectors, one CPU per type)
Spare-parts availability windowRepair/spares supply for a defined period after cancellationBudget the migration inside this window, not after it
After the windowBroker market, refurbished units, repair shopsWorkable but provenance and warranty are per-piece judgements — stated per line when we quote this market

The honest planning sentence for an S7-300/400 plant or vessel in 2026: the hardware will outlive the easy supply. The cheap insurance is a census (every 6ES7/6AV/6EP code on board, with firmware), a small lifetime stock of the top failure items, and a migration decision taken calmly. We run the census from nameplate photos as part of quoting — it costs you an hour with a camera.

3. Replacement rules — what drops in and what does not

Replacement caseDrop-in?The catch
Same 6ES7 code, newer revision (I/O modules, connectors, accessories)Almost alwaysCheck the compatibility note when the suffix moved; wiring and addressing unchanged
CPU, same code, newer firmwareUsuallyThe project may need the newer firmware selected in STEP 7/TIA; memory card contents re-loaded — keep a project backup OFF the machine
Successor module (different code named as replacement)Physically often, logically sometimesAddress/parameter differences — engineering touch required; plan a commissioning window
Classic HMI → current panelNo — project conversion eventWinCC flexible/Comfort project converted to TIA WinCC (Comfort) or Unified; panel cut-outs differ by model — check the cabinet door, not just the code
Memory cardsFamily-specificS7-300 MMC, S7-1200/1500 SIMATIC Memory Card — not interchangeable; a CPU without its card is a brick, so the card is a spare article in its own right
Batteries / bufferingPer familyS7-400-era buffering and clock batteries are consumables — date-label them at install
SITOP PSUBy ratingMatch voltage/current/redundancy module; the most common 03:00-at-sea failure and the cheapest shelf spare

4. Migration without drama — and what to stock meanwhile

The migration shape for the installed base: S7-300 → S7-1500 (or S7-1200 for small machines), classic distributed I/O → ET 200SP, classic panels → Unified, engineering consolidated in TIA Portal. Siemens publishes migration tooling (project converters, module replacement lists), and the realistic unit of work is one machine or one system per window — a vessel does it per drydock (survey planning guide), a plant per summer stop. Until then, the bridge stock that actually prevents downtime, in observed failure order: SITOP PSUs per rating; HMI panels per cut-out (screens die young in engine-control rooms); memory cards per CPU family, pre-loaded where licensing allows; one spare CPU per type with the project backup current; the top I/O module types (analog inputs die first — they meet the field); PROFIBUS connectors/terminators (6ES7972 class) and patch hardware; and the front connectors (6ES7592 class) that turn a module swap into minutes. Panel-side relatives for the same cabinets live in our LV decoder, contactor cross-reference and fuse-system guide; process-side instruments in the SITRANS guide.

How buying works at cballast. We quote current SIMATIC articles, phase-out-era spares (channel and provenance stated per line — new, new-old-stock, or refurbished with source class), and run installed-base censuses from label photos so the quote doubles as your obsolescence register. Accounts are vetted at onboarding; first order prepaid; established accounts on credit terms with repeat discounts; public bodies and utilities invoiced against purchase order from the first order. RFQs to sales@cballast.com.

Frequently asked questions

What does a 6ES7 number mean?
It is the SIMATIC S7 automation article prefix; the digits after it name the family (3xx = S7-300, 4xx = S7-400, 2xx = S7-1200, 5xx = S7-1500, 193 = ET 200SP) and the rest of the string the exact module and revision. Quote the complete string from the label — it is the whole identification.
Is the Siemens S7-300 discontinued?
The S7-300/400 generation is in Siemens's phase-out process — cancellation dates announced, successors (S7-1500/1200, ET 200SP) named, and a spare-parts window running after cancellation. Modules remain obtainable (new stock, NOS, refurbished) but on a tightening clock: census your installed base, stock the failure-prone articles, and plan the migration inside the window.
Can I replace an S7-300 module with the same part number?
For I/O modules and accessories, a same-code article (any revision) is normally a drop-in. For CPUs, match or re-select the firmware in the project and re-load the memory card from your backup. The real rule: keep the project backup current and off the machine — the hardware swap is the easy half.
My SIMATIC HMI panel died — can I just buy a new panel?
Buy the current panel (Basic/Unified per duty), but plan the project conversion: classic WinCC flexible or Comfort projects must be migrated in TIA Portal, and Unified panels run only Unified projects. Check the cabinet cut-out against the new model too. Hardware plus engineering hours is the honest quote, and that is how we write it.
Which memory card does my S7 CPU need?
Per family: S7-300 uses MMC cards, S7-1200/1500 use the SIMATIC Memory Card — not interchangeable. The card carries the program; a CPU without it is inert. Stock a spare card per CPU family alongside the project backup.
Are refurbished or new-old-stock SIMATIC modules safe to buy?
They are how phase-out-era plants actually survive — with provenance stated, revision/firmware checked against your project, and a test-before-need policy. We mark every such line explicitly (new / NOS / refurbished with source class) so the register stays honest; unmarked "new" modules at too-good prices are the counterfeit risk zone.
What SIMATIC spares should a ship or plant keep on the shelf?
In failure order: SITOP power supplies per rating, an HMI per cut-out, memory cards per CPU family, one CPU per type (project backed up), the most-used analog and digital I/O modules, PROFIBUS/PROFINET connectors and terminators, and front connectors. That short shelf converts most control-system failures into under an hour of work.
Who supplies Siemens SIMATIC spares?
cballast.com quotes current and phase-out-era 6ES7/6AV/6EP/6GK articles with channel and provenance stated per line, plus the census service that turns nameplate photos into an obsolescence register. Write to sales@cballast.com.

References and related guides

Standards and sources referenced: Siemens SIMATIC catalogue structure and product-cancellation/lifecycle practice (S7-300/400 phase-out, successor naming, spare-parts windows), TIA Portal migration documentation, SIMATIC memory and buffering documentation per family.

Questions on a module you cannot identify or a migration scope: write to sales@cballast.com. We answer whether or not you buy from us.

Open / Download PDF

Compiled by cBallast for identification and cross-reference. Part numbers, designations and trademarks belong to their respective manufacturers. Confirm ratings and dimensions against the manufacturer's current documentation and the nameplate of the installed equipment before ordering or installation.