cBallast Products Brands Categories Technical guides Information Contact Home › Technical guides › Press Fitting Finder — Geberit Mapress (Carbon SteelPress Fitting Finder — Geberit Mapress (Carbon Steel, Stainless, CuNiFe, Therm, Gas), Viega Sanpress / Sanpress Inox / Profipress / Prestabo / Megapress / Seapress, Uponor S-Press, Wavin, Roth by System, Type and Size
Size finder compiled by cBallast. 6-page PDF; the full content is on this page.
Press Fitting Finder
Press fittings are system-specific: the fitting profile (Geberit Mapress, Viega SC-Contur, Uponor S-Press), the pipe material (carbon steel zinc-plated, stainless 1.4401/1.4404, copper, CuNiFe for seawater, multilayer PE-X/Al) and the sealing element (EPDM for heating and potable water, HNBR for gas, FKM for solar and industrial) define the range, and fittings are only pressed with the jaws approved for that system. Within a system the fitting type (coupling, reducer, 45° and 90° bends, tee and reducing tee, adapter with male or female thread, union, flange adapter, end cap) and the pipe outside diameter (12, 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 mm) identify the part. The finder lists the catalogue by system, size and type so a fitting can be quoted for an installed pipe system.
Do not mix systems: a Mapress fitting on a Sanpress pipe, or a Prestabo (carbon steel) fitting on a stainless line, is not an approved joint. Carbon-steel press systems (Mapress C-Stahl, Prestabo) are for closed heating and cooling circuits only; potable water needs stainless or copper. Gas fittings carry a yellow marking and HNBR seal; seawater lines use CuNiFe (Mapress CuNiFe, Seapress).
Coverage: 1,300 of 1,496 catalogue rows with a readable size are listed (1,668 rows in these categories in total; the remainder can be found through the site search by part number).
Geberit FlowFit
Geberit Mapress (material not stated)
Type Size Part number Brand
bend 12 × 41 mm × 3/8" 20551 Geberit bend 45° 12 mm 30701 Geberit bend 90° 12 × 12 mm 3389574 Geberit bend 90° 12 mm × 1/2" 10030718 Geberit coupling 12 mm × 1/2" 33009 Geberit coupling 12 × 12 mm 22001 Geberit coupling 12 × 33 mm × 3/8" 21701 Geberit coupling 12 × 34 mm × 1/2" 21801 Geberit coupling 12 × 36 mm × 1/2" 21700 Geberit tee 12 × 12 mm × 3/8" 21301 Geberit threaded adapter 12 × 55 mm × 1/2" 21931 Geberit bend 15 mm 30932 Geberit bend 15 × 158 mm 20802 Geberit bend 15 × 35 mm × 1/2" 21613 Geberit bend 15 mm 30802 Geberit bend 15 mm 30892 Geberit bend 45° 15 mm 30702 Geberit bend 45° 15 × 15 mm 60702 Geberit bend 45° 15 mm 30872 Geberit bend 90° 15 × 15 mm 34500 Geberit bend 90° 15 mm × 1/2" 33403 Geberit bend 90° 15 × 15 × 49 mm 20302 Geberit bend 90° 15 mm 30102 Geberit bend 90° 15 × 15 mm 60302 Geberit coupling 15 × 15 mm 32002 Geberit coupling 15 mm × 3/4" 31731 Geberit coupling 15 × 37 mm × 1/2" 21802 Geberit coupling 15 mm × 1/2" 31703 Geberit coupling 15 × 15 mm 23932 Geberit coupling 15 × 15 mm 62002 Geberit fitting 15 mm 90452 Geberit fitting 15 × 15 mm 33932 Geberit reducer 15 × 12 mm 33002 Geberit sliding sleeve 15 × 15 mm 62102 Geberit tee 15 × 15 mm × 1/2" 31304 Geberit tee 15 × 15 × 12 mm 33005 Geberit tee 15 × 15 × 22 mm 21104 Geberit tee 15 × 15 mm × 1/2" 21304 Geberit tee 15 × 15 mm × 1/2" 31454 Geberit threaded adapter 15 mm × 3/4" 61714 Geberit threaded adapter 15 mm × 1/2" 61703 Geberit threaded adapter 15 mm × 1/2" 61932 Geberit union 15 mm × 3/4" 35301 Geberit union 15 mm × 1/2" 10030663 Geberit union 15 mm × 3/4" 35032 Geberit union 15 mm × 3/4" 35132 Geberit union 15 mm × 1 1/4" 35072 Geberit union 15 mm × 3/4" 35360 Geberit union 15 mm × 3/4" 35350 Geberit union 15 mm × 3/4" 35300 Geberit union 15 mm × 3/4" 35331 Geberit union 15 × 61 mm × 1/2" 25330 Geberit bend 18 × 52 mm × 1/2" 20555 Geberit bend 18 × 37 mm × 1/2" 21615 Geberit bend 18 mm 30933 Geberit bend 45° 18 × 18 mm 60703 Geberit bend 45° 18 × 18 mm 60603 Geberit bend 45° 18 × 18 mm 34522 Geberit bend 45° 18 × 18 × 37 mm 20703 Geberit bend 90° 18 × 18 × 53 mm 20103 Geberit bend 90° 18 mm × 1/2" 33405 Geberit bend 90° 18 × 18 mm 60103 Geberit bend 90° 18 × 18 mm 34508 Geberit bend 90° 18 mm × 1/2" 33425 Geberit coupling 18 mm 3248655 Geberit coupling 18 × 42 mm × 1/2" 21704 Geberit coupling 18 mm × 1/2" 90933 Geberit coupling 18 mm × 1/2" 34684 Geberit coupling 18 mm × 3/4" 90934 Geberit coupling 18 × 18 mm 32003 Geberit coupling 18 mm × 3/4" 31705 Geberit coupling 18 mm × 3/4" 34685 Geberit coupling 18 mm × 1/2" 31704 Geberit coupling 18 × 37 mm × 1/2" 21803 Geberit coupling 18 × 18 mm 62003 Geberit coupling 18 × 61 mm × 1/2" 21903 Geberit fitting 18 mm 90883 Geberit flange adapter 18 × 62 mm 10030646 Geberit reducer 18 × 12 mm 33003 Geberit reducer 18 × 12 mm 22302 Geberit reducer 18 × 15 mm 606673 Geberit sliding sleeve 18 × 18 mm 22103 Geberit sliding sleeve 18 × 18 mm 32103 Geberit tee 18 × 18 × 18 mm 31003 Geberit tee 18 × 18 mm × 1/2" 606632 Geberit tee 18 × 18 × 22 mm 21105 Geberit threaded adapter 18 mm × 1/2" 31933 Geberit threaded adapter 18 × 57 mm × 1/2" 21933 Geberit threaded adapter 18 mm × 1/2" 61704 Geberit threaded adapter 18 mm × 3/4" 61705 Geberit threaded adapter 18 mm × 1/2" 61933 Geberit threaded adapter 18 × 59 mm × 3/4" 21934 Geberit union 18 × 61 mm × 1/2" 25332 Geberit union 18 mm × 3/4" 35363 Geberit union 18 mm × 3/4" 35358 Geberit union 18 mm × 3/4" 35303 Geberit union 18 mm × 3/4" 35302 Geberit union 18 × 18 mm 35321 Geberit union 18 mm × 3/4" 10030772 Geberit union 18 × 37 mm × 3/4" 10031016 Geberit union 18 mm × 1/2" 35332 Geberit union 18 mm × 3/4" 25302 Geberit bend 22 mm × 3/4" 63855 Geberit bend 22 mm 30944 Geberit bend 22 mm 30934 Geberit bend 22 mm 30894 Geberit bend 22 × 41 mm × 3/4" 21618 Geberit bend 45° 22 × 22 mm 34516 Geberit bend 45° 22 × 22 × 42 mm 20704 Geberit bend 45° 22 × 22 mm 60704 Geberit bend 45° 22 × 22 × 42 mm 20604 Geberit bend 90° 22 × 22 mm 34502 Geberit bend 90° 22 mm × 3/4" 33805 Geberit bend 90° 22 mm × 3/4" 33407 Geberit bend 90° 22 mm 30104 Geberit bend 90° 22 × 22 mm 60104 Geberit bend 90° 22 × 22 × 61 mm 20304 Geberit bend 90° 22 mm × 3/4" 33427 Geberit coupling 22 × 44 mm × 3/4" 21707 Geberit coupling 22 mm × 1/2" 33846 Geberit coupling 22 × 40 mm × 1/2" 21715 Geberit coupling 22 × 22 mm 34603 Geberit coupling 22 × 22 mm 1334796 Geberit coupling 22 × 38 mm × 1/2" 21805 Geberit coupling 22 × 65 mm × 3/4" 21906 Geberit coupling 22 mm × 3/4" 31806 Geberit coupling 22 mm × 1" 31733 Geberit coupling 22 mm × 1" 31824 Geberit coupling 22 × 39 mm × 3/4" 21806 Geberit coupling 22 mm × 1/2" 31805 Geberit coupling 22 mm × 3/4" 31707 Geberit coupling 22 mm × 3/4" 3390051 Geberit coupling 22 mm × 1/2" 90935 Geberit coupling 22 × 62 mm × 1/2" 21905 Geberit fitting 22 mm 90454 Geberit flange adapter 22 × 65 mm 23754 Geberit reducer 22 × 15 mm 1156538 Geberit reducer 22 × 18 mm 1334838 Geberit reducer 22 × 18 mm 34617 Geberit sliding sleeve 22 × 22 mm 32104 Geberit sliding sleeve 22 × 22 mm 62104 Geberit tee 22 × 22 × 22 mm 31004 Geberit tee 22 × 18 × 15 mm 10045915 Geberit tee 22 × 22 mm × 3/4" 61395 Geberit tee 22 × 22 × 28 mm 21107 Geberit tee 22 × 22 × 15 mm 21206 Geberit tee 22 × 22 × 18 mm 21207 Geberit tee 22 × 22 × 22 mm 61004 Geberit tee 22 × 22 × 15 mm 3389798 Geberit tee 22 × 22 × 22 mm 21004 Geberit threaded adapter 22 mm × 3/4" 61936 Geberit threaded adapter 22 × 57 mm × 1/2" 21935 Geberit threaded adapter 22 mm × 3/4" 31936 Geberit union 22 mm × 1 1/2" 35045 Geberit union 22 mm × 1" 35366 Geberit union 22 × 22 mm 35322 Geberit union 22 mm × 1/2" 35334 Geberit union 22 × 68 mm × 3/4" 25335 Geberit union 22 mm × 1" 35336 Geberit bend 28 × 44 mm × 1/2" 21660 Geberit bend 28 mm 30955 Geberit bend 28 × 28 mm × 1/2" 20558 Geberit bend 45° 28 × 28 × 48 mm 20705 Geberit bend 45° 28 × 28 mm 34517 Geberit bend 45° 28 mm 30875 Geberit bend 90° 28 × 28 mm 60105 Geberit bend 90° 28 mm 30405 Geberit bend 90° 28 × 28 mm 34503 Geberit bend 90° 28 × 28 × 72 mm 20305 Geberit bend 90° 28 mm × 1" 33806 Geberit bend 90° 28 × 28 × 79 mm 20405 Geberit bend 90° 28 × 28 mm 60305 Geberit coupling 28 mm × 1" 3410677 Geberit coupling 28 × 28 mm 34604 Geberit coupling 28 mm × 3/4" 1257237 Geberit coupling 28 mm 20215 Geberit coupling 28 × 28 mm 23935 Geberit coupling 28 × 74 mm × 1/2" 10031013 Geberit coupling 28 mm × 1" 34689 Geberit coupling 28 mm × 1 1/4" 31734 Geberit coupling 28 × 15 mm 61275 Geberit coupling 28 × 46 mm × 3/4" 21717 Geberit coupling 28 × 28 mm 62005 Geberit coupling 28 × 48 mm × 1" 21708 Geberit coupling 28 mm × 3/4" 31819 Geberit flange adapter 28 mm 63706 Geberit reducer 28 × 15 mm 22307 Geberit reducer 28 × 22 mm 62309 Geberit sliding sleeve 28 × 28 mm 62105 Geberit tee 28 × 28 mm × 1" 21311 Geberit tee 28 × 28 mm × 1" 31461 Geberit tee 28 × 22 × 22 mm 31234 Geberit tee 28 × 28 × 15 mm 21209 Geberit tee 28 × 28 × 15 mm 31209 Geberit tee 28 × 28 mm × 1/2" 21309 Geberit tee 28 × 28 × 28 mm 21005 Geberit tee 28 × 28 mm × 1" 10030742 Geberit tee 28 × 28 × 22 mm 61261 Geberit union 28 × 75 mm × 1" 25337 Geberit union 28 mm × 1" 35046 Geberit union 28 mm × 1 1/2" 35075 Geberit bend 35 mm 30956 Geberit bend 35 mm 36105 Geberit bend 35 × 35 mm × 1 1/4" 23509 Geberit bend 45° 35 mm 32706 Geberit bend 45° 35 × 35 × 43 mm 1444181 Geberit bend 90° 35 mm × 1 1/4" 1156355 Geberit bend 90° 35 × 35 × 68 mm 23306 Geberit bend 90° 35 mm 930974 Geberit bend 90° 35 × 35 mm 60306 Geberit coupling 35 × 51 mm × 1" 21719 Geberit coupling 35 mm × 1 1/4" 31709 Geberit coupling 35 × 35 mm 23936 Geberit coupling 35 × 53 mm × 1 1/4" 21709 Geberit coupling 35 mm × 1" 31820 Geberit coupling 35 mm × 1/2" 33850 Geberit coupling 35 mm × 1" 1257260 Geberit coupling 35 × 35 mm 34605 Geberit coupling 35 × 35 mm 32006 Geberit coupling 35 × 45 mm × 1" 21820 Geberit
Geberit Mapress CuNiFe
Type Size Part number Brand
bend 15 × 15 mm 68726 Geberit bend 45° 15 × 15 mm 67702 Geberit bend 90° 15 mm × 1/2" 10031253 Geberit coupling 15 mm × 1/2" 67802 Geberit coupling 15 × 15 mm 67002 Geberit sliding sleeve 15 × 15 mm 67102 Geberit bend 45° 22 × 22 mm 67704 Geberit bend 90° 22 × 22 mm 68304 Geberit bend 90° 22 mm × 1/2" 67516 Geberit coupling 22 × 22 mm 67004 Geberit fitting 22 × 000 mm 56326 Geberit sliding sleeve 22 × 22 mm 67104 Geberit tee 22 × 22 mm × 3/4" 67348 Geberit threaded adapter 22 mm × 1/2" 68715 Geberit bend 28 × 28 mm 68719 Geberit bend 45° 28 × 28 mm 67705 Geberit bend 90° 28 × 28 mm 68105 Geberit bend 90° 28 mm × 1" 67518 Geberit reducer 28 × 22 mm 67309 Geberit reducer 28 × 15 mm 67307 Geberit tee 28 × 28 × 28 mm 68005 Geberit bend 45° 35 × 35 mm 67606 Geberit bend 90° 35 mm × 1/4" 67519 Geberit coupling 35 mm × 1/4" 67811 Geberit fitting 35 × 000 mm 56323 Geberit reducer 35 × 28 mm 67313 Geberit sliding sleeve 35 × 35 mm 67106 Geberit tee 35 × 35 mm × 1/2" 67352 Geberit tee 35 × 35 mm × 3/4" 67353 Geberit bend 42 × 42 mm 68731 Geberit bend 42 × 42 mm 68741 Geberit bend 45° 42 × 42 mm 67607 Geberit bend 90° 42 × 42 mm 68107 Geberit coupling 42 × 42 mm 67007 Geberit fitting 42 × 000 mm 56324 Geberit reducer 42 × 35 mm 67318 Geberit reducer 42 × 28 mm 67317 Geberit sliding sleeve 42 × 42 mm 67107 Geberit bend 54 × 54 mm 68722 Geberit bend 90° 54 mm × 2" 68711 Geberit bend 90° 54 mm × 2" 67511 Geberit bend 90° 54 × 54 mm 68308 Geberit coupling 54 × 54 mm 67008 Geberit coupling 54 mm × 2" 67818 Geberit reducer 54 × 35 mm 67323 Geberit reducer 54 × 42 mm 67324 Geberit
Geberit Mapress Gas
Type Size Part number Brand
bend 90° 15 mm × 1/2" 34149 Geberit tee 15 × 15 × 15 mm 34028 Geberit union 15 mm × 1/2" 34430 Geberit union 15 mm × 3/4" 34401 Geberit union 15 mm × 3/4" 34431 Geberit bend 45° 18 mm 34022 Geberit bend 90° 18 mm × 1/2" 34145 Geberit bend 90° 18 mm × 1/2" 34137 Geberit bend 90° 18 mm 34001 Geberit reducer 18 × 15 mm 34115 Geberit tee 18 × 18 mm × 1/2" 34053 Geberit union 18 mm × 1/2" 34402 Geberit union 18 mm × 3/4" 34403 Geberit union 18 mm × 1/2" 34432 Geberit bend 45° 22 mm 34016 Geberit bend 45° 22 mm 34023 Geberit bend 90° 22 mm × 3/4" 34146 Geberit bend 90° 22 mm 34002 Geberit coupling 22 mm × 1" 34347 Geberit flange adapter 22 mm 34204 Geberit reducer 22 × 18 mm 34117 Geberit reducer 22 × 15 mm 34116 Geberit sliding sleeve 22 × 22 mm 34110 Geberit tee 22 × 22 × 15 mm 10030902 Geberit tee 22 × 22 mm × 3/4" 34056 Geberit threaded adapter 22 mm × 1/2" 34069 Geberit union 22 mm × 1" 34405 Geberit union 22 mm × 1" 34436 Geberit bend 45° 28 mm 34017 Geberit bend 90° 28 mm × 1" 34152 Geberit bend 90° 28 mm × 3/4" 34154 Geberit bend 90° 28 mm × 1" 34147 Geberit reducer 28 × 15 mm 34118 Geberit reducer 28 × 22 mm 34120 Geberit tee 28 × 28 × 18 mm 34039 Geberit tee 28 × 28 × 28 mm 34031 Geberit tee 28 × 28 × 22 mm 34040 Geberit threaded adapter 28 mm × 3/4" 34068 Geberit union 28 mm × 1 3/8" 34159 Geberit bend 45° 35 mm 34196 Geberit bend 90° 35 mm × 1 1/4" 34148 Geberit coupling 35 mm 34466 Geberit reducer 35 × 28 mm 34124 Geberit tee 35 × 35 × 28 mm 34044 Geberit tee 35 × 35 × 22 mm 34043 Geberit tee 35 × 35 × 15 mm 34041 Geberit bend 45° 42 mm 34194 Geberit bend 90° 42 mm 34191 Geberit coupling 42 mm × 1 1/2" 34091 Geberit flange adapter 42 mm 34207 Geberit tee 42 × 42 × 22 mm 34045 Geberit tee 42 × 42 × 35 mm 34047 Geberit union 42 mm × 1 1/2" 10030699 Geberit bend 45° 54 mm 34195 Geberit bend 90° 54 mm 34192 Geberit coupling 54 × 54 mm 34107 Geberit coupling 54 mm × 2" 34092 Geberit coupling 54 mm 34468 Geberit reducer 54 × 28 mm 34133 Geberit tee 54 × 54 × 35 mm 34050 Geberit tee 54 × 54 mm × 3/4" 34264 Geberit tee 54 × 54 mm × 1/2" 34063 Geberit tee 54 × 54 × 22 mm 34048 Geberit tee 54 × 54 × 42 mm 34051 Geberit tee 54 × 54 × 54 mm 34034 Geberit tee 54 × 54 × 28 mm 34049 Geberit union 54 mm × 2" 34409 Geberit bend 45° 76.1 mm 34447 Geberit bend 45° 76.1 mm 34450 Geberit flange adapter 76.1 mm 34209 Geberit reducer 76.1 × 54 mm 34296 Geberit tee 76.1 × 76.1 mm × 3/4" 34266 Geberit tee 76.1 × 76.1 mm × 2" 34267 Geberit tee 76.1 × 76.1 × 76.1 mm 34285 Geberit threaded adapter 76.1 mm × 2 1/2" 34077 Geberit bend 90° 88.9 mm 34442 Geberit bend 90° 88.9 mm 34445 Geberit flange adapter 88.9 mm 34210 Geberit reducer 88.9 × 76.1 mm 34298 Geberit reducer 88.9 × 54 mm 34297 Geberit tee 88.9 × 88.9 mm × 2" 34269 Geberit tee 88.9 × 88.9 × 88.9 mm 34286 Geberit bend 90° 108 mm 34446 Geberit coupling 108 mm 34471 Geberit reducer 108 × 76.1 mm 34260 Geberit sliding sleeve 108 × 108 mm 34122 Geberit tee 108 × 108 × 108 mm 34287 Geberit
Geberit Mapress Stainless Steel
Type Size Part number Brand
fitting 15 × 000 mm 39042 Geberit valve 15 × 15 mm 94952 Geberit fitting 18 × 000 mm 39043 Geberit valve 18 × 18 mm 94953 Geberit fitting 22 × 000 mm 39004 Geberit valve 22 × 22 mm 94954 Geberit fitting 28 × 000 mm 39045 Geberit fitting 35 × 000 mm 39046 Geberit fitting 35 × 000 mm 39006 Geberit fitting 42 × 000 mm 39007 Geberit fitting 42 × 000 mm 39047 Geberit fitting 54 × 000 mm 39008 Geberit fitting 76.1 × 000 mm 39009 Geberit fitting 108 × 000 mm 39011 Geberit
Geberit Mapress Therm
Type Size Part number Brand
bend 90° 15 mm × 1/2" 43803 Geberit bend 90° 15 mm 41102 Geberit coupling 15 mm × 3/4" 10415377 Geberit coupling 15 × 23 mm 43212 Geberit coupling 15 mm × 3/8" 41801 Geberit coupling 15 mm × 3/4" 41714 Geberit coupling 15 mm × 3/8" 41726 Geberit coupling 15 × 15 mm 44002 Geberit fitting 15 × 000 mm 49102 Geberit tee 15 × 15 mm × 1/2" 41304 Geberit tee 15 × 15 × 15 mm 43002 Geberit union 15 mm × 1/2" 45402 Geberit union 15 mm × 1/2" 45430 Geberit bend 45° 18 mm 10415354 Geberit bend 90° 18 mm 40303 Geberit coupling 18 mm × 3/4" 10415378 Geberit coupling 18 mm × 3/4" 41804 Geberit coupling 18 mm × 1/2" 41704 Geberit fitting 18 × 000 mm 49103 Geberit sliding sleeve 18 × 18 mm 42103 Geberit tee 18 × 18 × 15 mm 41204 Geberit bend 45° 22 mm 40704 Geberit bend 90° 22 mm 40304 Geberit coupling 22 mm × 1" 45041 Geberit coupling 22 mm × 1/2" 41805 Geberit coupling 22 mm × 1 1/4" 45044 Geberit coupling 22 mm × 1" 41716 Geberit coupling 22 mm × 3/4" 41707 Geberit reducer 22 × 15 mm 42405 Geberit sliding sleeve 22 × 22 mm 42104 Geberit union 22 mm × 3/4" 45404 Geberit bend 45° 28 mm 42805 Geberit bend 90° 28 mm 40305 Geberit bend 90° 28 mm × 1" 43806 Geberit coupling 28 × 26 mm 43215 Geberit coupling 28 mm × 3/4" 41717 Geberit coupling 28 mm × 1/2" 41807 Geberit coupling 28 mm × 1" 41809 Geberit coupling 28 mm × 1" 41708 Geberit fitting 28 × 000 mm 49105 Geberit reducer 28 × 22 mm 42409 Geberit reducer 28 × 15 mm 42407 Geberit sliding sleeve 28 × 28 mm 42105 Geberit tee 28 × 28 mm × 3/4" 41350 Geberit tee 28 × 28 × 18 mm 41210 Geberit tee 28 × 28 × 15 mm 41209 Geberit union 28 mm × 1" 45406 Geberit bend 45° 35 mm 42706 Geberit coupling 35 mm × 1" 41719 Geberit coupling 35 mm × 1 1/2" 41826 Geberit coupling 35 mm × 1 1/2" 45036 Geberit sliding sleeve 35 × 35 mm 42106 Geberit tee 35 × 35 mm × 3/4" 41313 Geberit tee 35 × 35 × 15 mm 41212 Geberit tee 35 × 35 × 35 mm 43006 Geberit tee 35 × 35 × 18 mm 41213 Geberit union 35 mm × 1 1/4" 45407 Geberit bend 45° 42 mm 42807 Geberit bend 45° 42 mm 42707 Geberit coupling 42 × 33 mm 43217 Geberit coupling 42 mm × 1 1/2" 41710 Geberit coupling 42 × 42 mm 44007 Geberit sliding sleeve 42 × 42 mm 42107 Geberit tee 42 × 42 × 35 mm 41220 Geberit tee 42 × 42 mm × 1/2" 41316 Geberit tee 42 × 42 × 28 mm 41219 Geberit union 42 mm × 1 1/2" 45439 Geberit coupling 54 mm × 2 3/8" 45038 Geberit tee 54 × 54 × 42 mm 41226 Geberit tee 54 × 54 mm × 1/2" 41360 Geberit union 54 mm × 2" 45409 Geberit bend 45° 76.1 mm 42809 Geberit bend 45° 76.1 mm 42709 Geberit bend 90° 76.1 mm 43309 Geberit bend 90° 76.1 mm 41109 Geberit coupling 76.1 mm × 3" 45039 Geberit coupling 76.1 mm × 2 1/2" 41713 Geberit coupling 76.1 mm 43219 Geberit fitting 76.1 × 000 mm 49609 Geberit sliding sleeve 76.1 × 76.1 mm 42109 Geberit tee 76.1 × 76.1 mm × 3/4" 10415444 Geberit tee 76.1 × 76.1 × 54 mm 41233 Geberit tee 76.1 × 76.1 × 35 mm 10415425 Geberit bend 45° 88.9 mm 42810 Geberit bend 90° 88.9 mm 41110 Geberit coupling 88.9 × 88.9 mm 44010 Geberit coupling 88.9 × 67 mm 43220 Geberit coupling 88.9 mm × 3 1/2" 45040 Geberit fitting 88.9 × 000 mm 49610 Geberit flange adapter 88.9 × 125 mm 43740 Geberit reducer 88.9 × 76.1 mm 42439 Geberit reducer 88.9 × 54 mm 42438 Geberit sliding sleeve 88.9 × 88.9 mm 42110 Geberit tee 88.9 × 88.9 × 22 mm 41236 Geberit bend 45° 108 mm 10415365 Geberit bend 90° 108 mm 43311 Geberit coupling 108 × 108 mm 44011 Geberit fitting 108 × 000 mm 49611 Geberit flange adapter 108 × 130 mm 10415535 Geberit tee 108 × 108 × 54 mm 41248 Geberit tee 108 × 108 × 35 mm 10415432 Geberit tee 108 × 108 mm × 3/4" 41336 Geberit tee 108 × 108 × 108 mm 43011 Geberit
Geberit Mepla
Isiflo
Roth Alu-LaserPlus
Roth Alupex
Uponor S-Press
Type Size Part number Brand
bend 90° 16 mm × 1/2" 1070532 Uponor bend 90° 16 mm × 1/2" 1070539 Uponor bend 90° 16 mm × 1/2" 1070644 Uponor bend 90° 16 × 16 mm 1070523 Uponor coupling 16 × 16 mm 1039933 Uponor reducing tee 16 × 16 × 20 mm 1039948 Uponor threaded adapter 16 mm × 1/2" 1090686 Uponor bend 90° 20 mm × 1/2" 1070540 Uponor bend 90° 20 mm × 1/2" 1070533 Uponor reducing tee 20 × 16 × 16 mm 1039949 Uponor reducing tee 20 × 20 × 16 mm 1039950 Uponor sliding sleeve 20 × 20 mm 1118707 Uponor threaded adapter 20 mm × 3/4" 1090687 Uponor bend 45° 25 × 25 mm 1070545 Uponor bend 90° 25 mm × 1" 1070543 Uponor bend 90° 25 × 25 mm 1070525 Uponor bend 90° 25 mm × 3/4" 1070535 Uponor coupling 25 mm × 3/4" 1090689 Uponor end cap 25 mm 1070623 Uponor reducer 25 × 16 mm 1039938 Uponor reducer 25 mm 1039940 Uponor reducing tee 25 × 25 × 20 mm 1039957 Uponor reducing tee 25 × 20 × 20 mm 1039956 Uponor reducing tee 25 × 16 × 16 mm 1039953 Uponor bend 90° 32 × 32 mm 1070526 Uponor bend 90° 32 mm × 1" 1070544 Uponor bend 90° 32 × 32 mm 1039932 Uponor coupling 32 mm 1039936 Uponor reducing tee 32 × 25 × 25 mm 1039960 Uponor reducing tee 32 × 32 × 20 mm 1039959 Uponor sliding sleeve 32 × 32 mm 1118709 Uponor tee 32 × 32 × 32 mm 1039947 Uponor bend 90° 40 × 40 mm 1046386 Uponor bend 90° 40 mm × 1 1/2" 1046910 Uponor coupling 40 × 40 mm 1046401 Uponor reducer 40 × 25 mm 1039941 Uponor reducer 40 × 32 mm 1039942 Uponor reducing tee 40 × 32 × 25 mm 1039963 Uponor reducing tee 40 × 32 × 32 mm 1046919 Uponor reducing tee 40 × 40 × 32 mm 1039966 Uponor reducing tee 40 × 32 × 25 mm 1046917 Uponor reducing tee 40 × 32 × 32 mm 10014072 Uponor tee 40 × 40 × 40 mm 1046390 Uponor bend 45° 50 × 50 mm 1046914 Uponor bend 90° 50 mm × 1 1/2" 1046912 Uponor reducer 50 × 40 mm 1046406 Uponor reducing tee 50 × 40 × 25 mm 1046924 Uponor reducing tee 50 × 50 × 32 mm 1039969 Uponor tee 50 × 50 × 50 mm 1046391 Uponor coupling 63 × 63 mm 1032881 Uponor reducer 63 × 40 mm 1032883 Uponor coupling 75 mm × 2 1/2" 1032896 Uponor reducing tee 75 × 75 × 32 mm 1032892 Uponor coupling 90 mm × 3" 1029127 Uponor
Uponor Uni Pipe
Viega Easytop
Viega Megapress
Viega Prestabo
Type Size Part number Brand
bend 15 mm × 1/2" 558413 Viega bend 90° 15 × 15 mm 558192 Viega bend 90° 15 × 15 mm 558123 Viega coupling 15 mm × 3/8" 558994 Viega coupling 15 mm × 1/2" 559557 Viega fitting 15 × 000 mm 806415 Viega tee 15 × 15 mm × 1/2" 558888 Viega tee 15 × 15 × 22 mm 558857 Viega bend 18 mm × 1/2" 558420 Viega bend 18 × 18 mm 601249 Viega bend 18 mm × 1/2" 559533 Viega bend 45° 18 × 18 mm 558277 Viega bend 90° 18 × 18 mm 558130 Viega coupling 18 mm × 3/4" 559021 Viega coupling 18 mm × 1/2" 559014 Viega reducer 18 × 15 mm 558499 Viega bend 22 mm × 3/4" 559540 Viega bend 90° 22 × 22 mm 558147 Viega coupling 22 mm × 3/4" 559113 Viega coupling 22 mm × 3/4" 559038 Viega reducer 22 × 15 mm 558505 Viega sliding sleeve 22 × 22 mm 558079 Viega tee 22 × 22 × 15 mm 558697 Viega tee 22 × 22 × 18 mm 558703 Viega tee 22 × 22 mm × 3/4" 641962 Viega tee 22 × 22 mm × 1/2" 558901 Viega threaded adapter 22 mm 643461 Viega union 22 mm × 3/4" 559250 Viega coupling 28 mm × 1" 559045 Viega coupling 28 mm × 1" 559120 Viega coupling 28 × 28 mm 558017 Viega reducer 28 × 22 mm 558543 Viega tee 28 × 28 × 15 mm 558710 Viega tee 28 × 28 × 22 mm 558734 Viega tee 28 × 28 mm × 1/2" 558918 Viega union 28 mm × 1" 559267 Viega bend 45° 35 × 35 mm 558307 Viega coupling 35 mm × 1/4" 642204 Viega reducer 35 × 22 mm 558550 Viega tee 35 × 35 mm × 1/2" 558932 Viega tee 35 × 35 × 22 mm 558765 Viega tee 35 × 35 × 35 mm 558659 Viega bend 45° 42 × 42 mm 558314 Viega bend 90° 42 × 42 mm 558178 Viega coupling 42 mm × 1 1/2" 559069 Viega fitting 42 × 000 mm 559489 Viega sliding sleeve 42 × 42 mm 558109 Viega tee 42 × 42 × 28 mm 558796 Viega tee 42 × 42 × 35 mm 558802 Viega tee 42 × 42 × 22 mm 558789 Viega tee 42 × 42 mm × 3/4" 558963 Viega bend 90° 54 × 54 mm 562165 Viega coupling 54 mm × 2" 642228 Viega coupling 54 × 54 mm 558048 Viega reducer 54 × 42 mm 558604 Viega reducer 54 × 35 mm 642792 Viega tee 54 × 54 × 35 mm 558833 Viega tee 54 × 54 × 54 mm 558673 Viega reducer 76.1 × 54 mm 598129 Viega tee 76.1 × 76.1 × 35 mm 597894 Viega tee 76.1 × 76.1 mm × 3/4" 598075 Viega bend 45° 88.9 × 88.9 mm 597702 Viega bend 90° 88.9 × 88.9 mm 597665 Viega bend 90° 88.9 × 88.9 mm 597580 Viega coupling 88.9 × 88.9 mm 597740 Viega coupling 88.9 mm × 3" 2671790 Viega fitting 88.9 × 88.9 × 28 mm 597931 Viega reducer 88.9 × 54 mm 598136 Viega tee 88.9 × 88.9 × 88.9 mm 597825 Viega coupling 108 mm × 4" 629991 Viega fitting 108 × 000 mm 598358 Viega
Viega Profipress
Viega Raxofix
Type Size Part number Brand
bend 90° 16 mm × 1/2" 646103 Viega bend 90° 16 mm × 3/4" 645991 Viega fitting 16 × 18 mm 646561 Viega fitting 16 mm 645809 Viega union 16 mm 688431 Viega bend 90° 20 mm × 1/2" 646110 Viega bend 90° 20 mm × 3/4" 646127 Viega coupling 20 × 16 mm 646820 Viega coupling 20 × 22 mm 646745 Viega tee 20 × 20 mm × 1/2" 647131 Viega bend 90° 25 mm × 3/4" 646028 Viega coupling 25 × 22 mm 646752 Viega fitting 25 × 22 mm 646592 Viega tee 25 × 25 × 20 mm 647384 Viega bend 45° 32 × 32 mm 647087 Viega coupling 32 × 25 mm 646882 Viega coupling 32 × 32 mm 646868 Viega tee 32 × 32 mm × 3/4" 647179 Viega tee 32 × 32 × 20 mm 647445 Viega bend 45° 40 × 40 mm 647094 Viega bend 90° 40 × 40 mm 647049 Viega coupling 40 × 32 mm 646905 Viega tee 40 × 40 mm 647193 Viega tee 40 × 40 × 20 mm 647483 Viega tee 40 × 40 × 32 mm 647520 Viega bend 45° 50 × 50 mm 2368694 Viega coupling 50 × 50 mm 646912 Viega coupling 50 × 40 mm 646929 Viega tee 50 × 50 × 32 mm 647551 Viega bend 90° 63 × 63 mm 647063 Viega coupling 63 × 50 mm 646943 Viega tee 63 × 63 × 50 mm 647612 Viega tee 63 × 63 mm 647230 Viega
Viega Sanpress
Type Size Part number Brand
bend 90° 12 mm × 1/2" 291013 Viega bend 90° 15 mm × 1/2" 112950 Viega bend 90° 15 mm × 1/2" 107345 Viega coupling 15 mm × 3/4" 287764 Viega coupling 15 mm × 1/2" 295462 Viega coupling 15 mm × 3/4" 298098 Viega coupling 15 mm × 3/8" 298074 Viega coupling 15 mm × 1/2" 741975 Viega coupling 15 mm × 1/2" 380885 Viega fitting 15 mm 141523 Viega fitting 15 × 000 mm 807115 Viega fitting 15 × 000 mm 615994 Viega sliding sleeve 15 × 15 mm 119485 Viega threaded adapter 15 mm × 1/2" 115418 Viega union 15 mm 126148 Viega union 15 mm × 3/4" 265663 Viega bend 45° 18 × 18 mm 281533 Viega bend 90° 18 mm × 1/2" 436995 Viega bend 90° 18 mm × 3/4" 314354 Viega bend 90° 18 mm × 1/2" 281236 Viega bend 90° 18 × 18 mm 281267 Viega bend 90° 18 mm × 3/4" 298227 Viega coupling 18 mm × 1/2" 283490 Viega coupling 18 mm × 3/4" 283230 Viega coupling 18 mm × 3/4" 287108 Viega coupling 18 mm × 1/2" 287085 Viega fitting 18 × 000 mm 616007 Viega reducer 18 × 15 mm 287375 Viega sliding sleeve 18 × 18 mm 287061 Viega tee 18 × 18 mm × 1/2" 281359 Viega tee 18 × 18 × 18 mm 281410 Viega tee 18 × 18 × 15 mm 922195 Viega union 18 mm × 3/4" 283391 Viega bend 45° 22 × 22 mm 110949 Viega bend 90° 22 mm × 3/4" 116057 Viega coupling 22 mm × 3/4" 108465 Viega coupling 22 mm × 3/4" 104306 Viega fitting 22 mm 140557 Viega fitting 22 × 000 mm 102708 Viega reducer 22 × 15 mm 108250 Viega tee 22 × 18 × 18 mm 298401 Viega tee 22 × 22 × 15 mm 109165 Viega tee 22 × 15 × 22 mm 298418 Viega tee 22 × 22 × 22 mm 109257 Viega tee 22 × 22 mm × 3/4" 194123 Viega union 22 mm 126124 Viega union 22 mm × 3/4" 125318 Viega bend 45° 28 × 28 mm 111670 Viega bend 90° 28 × 28 mm 115159 Viega bend 90° 28 × 28 mm 106348 Viega coupling 28 × 28 mm 108618 Viega coupling 28 × 28 mm 690281 Viega coupling 28 mm × 1" 114329 Viega fitting 28 × 000 mm 807382 Viega reducer 28 × 15 mm 288228 Viega reducer 28 × 18 mm 298319 Viega reducer 28 × 22 mm 109974 Viega tee 28 × 28 mm × 3/4" 194130 Viega tee 28 × 28 mm × 3/4" 313968 Viega threaded adapter 28 mm × 1" 122034 Viega union 28 mm 124311 Viega bend 90° 35 × 35 mm 111953 Viega coupling 35 mm × 1" 297947 Viega coupling 35 mm × 1" 134730 Viega coupling 35 × 35 mm 690298 Viega coupling 35 mm × 1" 298111 Viega fitting 35 × 000 mm 108588 Viega reducer 35 × 28 mm 116934 Viega tee 35 × 35 mm × 3/4" 194147 Viega tee 35 × 35 × 18 mm 313616 Viega threaded adapter 35 mm × 1 1/4" 125288 Viega union 35 mm × 1 1/4" 138875 Viega union 35 mm 130947 Viega bend 45° 42 × 42 mm 134471 Viega bend 90° 42 mm × 1 1/2" 299415 Viega coupling 42 × 42 mm 116835 Viega coupling 42 × 42 mm 690304 Viega coupling 42 mm × 1 1/4" 298050 Viega fitting 42 mm 144999 Viega fitting 42 × 000 mm 113001 Viega reducer 42 × 22 mm 287368 Viega sliding sleeve 42 × 42 mm 131494 Viega tee 42 × 42 mm × 1" 361211 Viega tee 42 × 42 × 28 mm 283544 Viega threaded adapter 42 mm × 1 1/2" 132231 Viega union 42 mm × 1 1/2" 135966 Viega bend 90° 54 mm × 2" 197988 Viega coupling 54 mm × 2" 195267 Viega coupling 54 × 54 mm 690311 Viega coupling 54 × 54 mm 215835 Viega coupling 54 mm × 2" 199104 Viega fitting 54 × 000 mm 193676 Viega fitting 54 mm 187798 Viega reducer 54 × 35 mm 194222 Viega reducer 54 × 28 mm 194239 Viega reducer 54 × 42 mm 198879 Viega tee 54 × 54 × 28 mm 283568 Viega tee 54 × 54 × 54 mm 199364 Viega tee 54 × 54 × 22 mm 195991 Viega tee 54 × 54 × 35 mm 197469 Viega tee 54 × 54 mm × 1" 310929 Viega tee 54 × 54 mm × 1/2" 197353 Viega bend 45° 76.1 × 76.1 mm 351342 Viega bend 45° 88.9 × 88.9 mm 353698 Viega bend 90° 88.9 × 88.9 mm 353667 Viega bend 90° 88.9 × 88.9 mm 350680 Viega fitting 88.9 × 000 mm 354855 Viega reducer 88.9 × 76.1 mm 354688 Viega reducer 88.9 × 54 mm 354671 Viega sliding sleeve 88.9 × 88.9 mm 353322 Viega tee 88.9 × 88.9 mm × 3/4" 354589 Viega tee 88.9 × 88.9 mm × 2" 351441 Viega bend 90° 108 × 108 mm 353674 Viega bend 90° 108 × 108 mm 350703 Viega fitting 108 × 000 mm 354848 Viega reducer 108 × 76.1 mm 354701 Viega tee 108 × 108 × 108 mm 350642 Viega tee 108 × 108 × 76.1 mm 354435 Viega tee 108 × 108 × 54 mm 354428 Viega tee 108 × 108 mm × 3/4" 354596 Viega
Viega Sanpress Inox
Type Size Part number Brand
bend 90° 15 mm × 1/2" 436971 Viega bend 90° 15 mm × 1/2" 436896 Viega bend 90° 15 mm 435707 Viega threaded adapter 15 mm × 3/4" 436452 Viega union 15 mm × 1/2" 438258 Viega union 15 mm × 1/2" 437572 Viega bend 90° 18 mm × 1/2" 436902 Viega bend 90° 18 mm 435646 Viega bend 90° 18 mm × 1/2" 437305 Viega bend 90° 18 mm × 1/2" 437251 Viega coupling 18 mm × 3/4" 436605 Viega fitting 18 mm × 3/4" 436810 Viega sliding sleeve 18 × 18 mm 436384 Viega tee 18 × 18 × 18 mm 435868 Viega tee 18 × 18 × 15 mm 435929 Viega threaded adapter 18 mm × 3/4" 436476 Viega union 18 mm × 1/2" 437596 Viega union 18 mm × 1/2" 438272 Viega union 18 mm × 3/4" 437602 Viega bend 45° 22 mm 435790 Viega bend 90° 22 mm × 3/4" 437275 Viega coupling 22 mm × 1" 436636 Viega coupling 22 × 22 mm 436179 Viega fitting 22 mm × 3/4" 436834 Viega sliding sleeve 22 × 22 mm 436391 Viega tee 22 × 22 × 15 mm 435936 Viega tee 22 × 22 × 22 mm 1470871 Viega tee 22 × 22 × 18 mm 435943 Viega threaded adapter 22 mm × 1" 436506 Viega threaded adapter 22 mm × 3/4" 436490 Viega union 22 mm × 3/4" 438302 Viega union 22 mm × 3/4" 437619 Viega bend 45° 28 mm 435417 Viega bend 45° 28 mm 435806 Viega bend 90° 28 mm × 1" 437046 Viega bend 90° 28 mm × 1" 436933 Viega bend 90° 28 mm × 1" 437343 Viega bend 90° 28 mm 435660 Viega coupling 28 mm × 3/4" 436643 Viega reducer 28 × 18 mm 436261 Viega reducer 28 × 15 mm 436254 Viega tee 28 × 28 × 28 mm 435882 Viega tee 28 × 28 × 15 mm 435950 Viega union 28 mm × 1" 437534 Viega bend 45° 35 mm 435424 Viega bend 90° 35 mm × 1 1/4" 436940 Viega bend 90° 35 mm 435745 Viega reducer 35 × 18 mm 436285 Viega tee 35 × 35 × 22 mm 436001 Viega threaded adapter 35 mm × 1" 436537 Viega union 35 mm × 1 1/4" 437541 Viega bend 90° 42 mm × 1 1/2" 436957 Viega reducer 42 × 35 mm 436339 Viega reducer 42 × 28 mm 436322 Viega tee 42 × 42 × 42 mm 435905 Viega tee 42 × 42 × 22 mm 436032 Viega tee 42 × 42 × 28 mm 436049 Viega union 42 mm × 1 1/2" 438357 Viega bend 45° 54 mm 435370 Viega bend 90° 54 mm 435769 Viega bend 90° 54 mm 435691 Viega coupling 54 mm × 2" 436681 Viega coupling 54 × 54 mm 436216 Viega reducer 54 × 42 mm 436360 Viega tee 54 × 54 × 22 mm 435844 Viega union 54 mm × 2" 438364 Viega bend 45° 64 mm 578015 Viega bend 45° 64 mm 578008 Viega bend 90° 64 mm 577995 Viega bend 90° 64 mm 577988 Viega coupling 64 × 64 mm 578084 Viega tee 64 × 64 × 64 mm 578022 Viega bend 90° 76.1 mm 482596 Viega bend 90° 76.1 mm 482626 Viega flange adapter 76.1 mm 482978 Viega sliding sleeve 76.1 × 76.1 mm 482831 Viega threaded adapter 76.1 mm × 2 1/2" 482923 Viega bend 90° 88.9 mm 482602 Viega bend 90° 88.9 mm 482633 Viega coupling 88.9 mm × 3" 619978 Viega reducer 88.9 × 76.1 mm 483159 Viega tee 88.9 × 88.9 × 54 mm 482749 Viega threaded adapter 88.9 mm × 3" 483128 Viega bend 45° 108 mm 482701 Viega bend 90° 108 mm 482640 Viega reducer 108 × 88.9 mm 483180 Viega reducer 108 × 54 mm 483166 Viega tee 108 × 108 × 108 mm 482763 Viega tee 108 × 108 × 88.9 mm 482794 Viega
Viega Seapress
Type Size Part number Brand
bend 90° 15 × 15 mm 453169 Viega coupling 15 mm × 1/2" 453039 Viega sliding sleeve 15 × 15 mm 453299 Viega threaded adapter 15 mm × 1/2" 477226 Viega coupling 22 × 22 mm 453114 Viega reducer 22 × 15 mm 452810 Viega tee 22 × 22 × 22 mm 453480 Viega threaded adapter 22 mm × 3/4" 477196 Viega threaded adapter 22 mm × 1/2" 477189 Viega bend 45° 28 × 28 mm 453961 Viega coupling 28 mm × 1" 461201 Viega coupling 28 × 28 mm 453121 Viega threaded adapter 28 mm × 1" 452988 Viega bend 45° 35 × 35 mm 453978 Viega bend 45° 35 × 35 mm 453916 Viega coupling 35 mm × 1 1/4" 461218 Viega reducer 35 × 22 mm 452834 Viega threaded adapter 35 mm × 1 1/4" 461157 Viega bend 45° 42 × 42 mm 453923 Viega bend 90° 42 × 42 mm 453664 Viega coupling 42 × 42 mm 453145 Viega coupling 42 mm × 1 1/2" 453084 Viega flange adapter 42 × 42 mm 454098 Viega sliding sleeve 42 × 42 mm 453336 Viega tee 42 × 42 × 42 mm 453510 Viega tee 42 × 42 mm × 3/4" 461089 Viega threaded adapter 42 mm × 1 1/2" 461164 Viega bend 45° 54 × 54 mm 453992 Viega bend 90° 54 × 54 mm 453213 Viega coupling 54 mm × 2" 453091 Viega reducer 54 × 35 mm 453275 Viega reducer 54 × 42 mm 453282 Viega tee 54 × 42 × 54 mm 453558 Viega tee 54 × 54 × 54 mm 453527 Viega reducer 76.1 × 42 mm 453350 Viega reducer 76.1 × 54 mm 556648 Viega tee 76.1 × 76.1 mm × 3/4" 453770 Viega bend 90° 88.9 × 88.9 mm 556532 Viega flange adapter 88.9 × 88.9 mm 454128 Viega reducer 88.9 × 76.1 mm 556198 Viega tee 88.9 × 76.1 × 88.9 mm 453848 Viega tee 88.9 × 35 × 88.9 mm 453824 Viega tee 88.9 × 54 × 88.9 mm 453831 Viega bend 45° 108 × 108 mm 10416313 Viega bend 45° 108 × 108 mm 556631 Viega bend 90° 108 × 108 mm 556549 Viega bend 90° 108 × 108 mm 556556 Viega coupling 108 × 108 mm 556518 Viega reducer 108 × 76.1 mm 556204 Viega reducer 108 × 88.9 mm 556211 Viega tee 108 × 73.1 × 108 mm 453879 Viega tee 108 × 54 × 108 mm 453862 Viega tee 108 × 108 × 108 mm 556242 Viega
Wavin Tigris
Part numbers and designations are those of the original manufacturers and are given for identification. cBallast is an independent supplier; confirm ratings against the nameplate of the installed equipment before ordering. Table generated from the cBallast catalogue on 2026-09-29.
Compiled by cBallast for identification and cross-reference. Part numbers, designations and trademarks belong to their respective manufacturers. Confirm ratings and dimensions against the manufacturer's current documentation and the nameplate of the installed equipment before ordering or installation.