cBallast Products Brands Categories Technical guides Information Contact Home › Technical guides › V-Ring Seal Finder — VAV-Ring Seal Finder — VA, VS, VL and VE Types by Shaft Diameter and Lip Material (NBR / FKM) (SKF)
Size finder compiled by cBallast. 6-page PDF; the full content is on this page.
V-Ring Seal Finder
A V-ring is an all-rubber axial seal that rotates with the shaft and seals with a flexible lip against a counterface at right angles to the shaft; it excludes dust, water and grease and is used as a secondary seal in front of radial shaft seals and in bearing housings. Types differ in cross-section: VA (standard), VS (narrow, for restricted space), VL (wide-lip for large gaps) and VE (extra-wide for very large shafts). The size number is the nominal shaft diameter and each ring covers a range (VA 100 fits 99–105 mm); the material suffix R = NBR nitrile (−40 to +100 °C), V = FKM fluoro rubber (−20 to +150 °C). The finder lists the catalogue by type and shaft range.
The V-ring is stretched over the shaft — no groove is needed — but it must be positioned at the correct axial distance (B) from the counterface stated in the tables, and above about 8 m/s the ring needs an axial support to stop it lifting. Counterfaces should be smooth (Ra ≤ 2 µm); rings can be fitted with a slight interference to shafts up to 2 % larger than nominal.
Coverage: 915 of 915 catalogue rows with a readable size are listed (997 rows in these categories in total; the remainder can be found through the site search by part number).
VA type
Shaft range Type Lip material Seal width Part number Brand
3.5 – 4.5 mm VA Nitrile 3.7 mm 4VAR SKF 3.5 – 4.5 mm VA Fluoro 3.7 mm 4VAV SKF 4.5 – 5.5 mm VA Nitrile 3.7 mm 5VAR SKF 4.5 – 5.5 mm VA Fluoro 3.7 mm 5VAV SKF 5.5 – 6.5 mm VA Nitrile 3.7 mm 6VAR SKF 5.5 – 6.5 mm VA Fluoro 3.7 mm 6VAV SKF 6.5 – 8 mm VA Nitrile 3.7 mm 7VAR SKF 6.5 – 8 mm VA Fluoro 3.7 mm 7VAV SKF 8 – 9.5 mm VA Nitrile 3.7 mm 8VAR SKF 8 – 9.5 mm VA Fluoro 3.7 mm 8VAV SKF 9.5 – 11.5 mm VA Nitrile 5.5 mm 10VAR SKF 9.5 – 11.5 mm VA Fluoro 5.5 mm 10VAV SKF 11.5 – 12.5 mm VA Nitrile 5.5 mm 12VAR SKF 11.5 – 12.5 mm VA Fluoro 5.5 mm 12VAV SKF 12.5 – 13.5 mm VA Nitrile 5.5 mm 13VAR SKF 12.5 – 13.5 mm VA Fluoro 5.5 mm 13VAV SKF 13.5 – 15.5 mm VA Nitrile 5.5 mm 14VAR SKF 13.5 – 15.5 mm VA Fluoro 5.5 mm 14VAV SKF 15.5 – 17 mm VA Nitrile 5.5 mm 16VAR SKF 15.5 – 17 mm VA Fluoro 5.5 mm 16VAV SKF 17.5 – 19 mm VA Nitrile 5.5 mm 18VAR SKF 17.5 – 19 mm VA Fluoro 5.5 mm 18VAV SKF 19 – 21 mm VA Nitrile 7.5 mm 20VAR SKF 19 – 21 mm VA Fluoro 7.5 mm 20VAV SKF 21 – 24 mm VA Nitrile 7.5 mm 22VAR SKF 21 – 24 mm VA Fluoro 7.5 mm 22VAV SKF 24 – 27 mm VA Nitrile 7.5 mm 25VAR SKF 24 – 27 mm VA Fluoro 7.5 mm 25VAV SKF 27 – 29 mm VA Nitrile 7.5 mm 28VAR SKF 27 – 29 mm VA Fluoro 7.5 mm 28VAV SKF 29 – 31 mm VA Nitrile 7.5 mm 30VAR SKF 29 – 31 mm VA Fluoro 7.5 mm 30VAV SKF 31 – 33 mm VA Nitrile 7.5 mm 32VAR SKF 31 – 33 mm VA Fluoro 7.5 mm 32VAV SKF 33 – 36 mm VA Nitrile 7.5 mm 35VAR SKF 33 – 36 mm VA Fluoro 7.5 mm 35VAV SKF 36 – 38 mm VA Nitrile 7.5 mm 38VAR SKF 36 – 38 mm VA Fluoro 7.5 mm 38VAV SKF 38 – 43 mm VA Nitrile 9 mm 40VAR SKF 38 – 43 mm VA Fluoro 9 mm 40VAV SKF 43 – 48 mm VA Nitrile 9 mm 45VAR SKF 43 – 48 mm VA Fluoro 9 mm 45VAV SKF 48 – 53 mm VA Nitrile 9 mm 50VAR SKF 48 – 53 mm VA Fluoro 9 mm 50VAV SKF 50 mm nominal VA — — VA-50 Trelleborg 53 – 58 mm VA Nitrile 9 mm 55VAR SKF 53 – 58 mm VA Fluoro 9 mm 55VAV SKF 58 – 63 mm VA Nitrile 9 mm 60VAR SKF 58 – 63 mm VA Fluoro 9 mm 60VAV SKF 63 – 68 mm VA Nitrile 9 mm 65VAR SKF 63 – 68 mm VA Fluoro 9 mm 65VAV SKF 68 – 73 mm VA Nitrile 11 mm 70VAR SKF 68 – 73 mm VA Fluoro 11 mm 70VAV SKF 73 – 78 mm VA Nitrile 11 mm 75VAR SKF 73 – 78 mm VA Fluoro 11 mm 75VAV SKF 78 – 83 mm VA Nitrile 11 mm 80VAR SKF 78 – 83 mm VA Fluoro 11 mm 80VAV SKF 83 – 88 mm VA Nitrile 11 mm 85VAR SKF 83 – 88 mm VA Fluoro 11 mm 85VAV SKF 88 – 93 mm VA Nitrile 11 mm 90VAR SKF 88 – 93 mm VA Fluoro 11 mm 90VAV SKF 93 – 98 mm VA Nitrile 11 mm 95VAR SKF 93 – 98 mm VA Fluoro 11 mm 95VAV SKF 98 – 105 mm VA Nitrile 11 mm 100VAR SKF 98 – 105 mm VA Fluoro 11 mm 100VAV SKF 105 – 115 mm VA Nitrile 12.8 mm 110VAR SKF 105 – 115 mm VA Fluoro 12.8 mm 110VAV SKF 115 – 125 mm VA Nitrile 12.8 mm 120VAR SKF 115 – 125 mm VA Fluoro 12.8 mm 120VAV SKF 125 – 135 mm VA Nitrile 12.8 mm 130VAR SKF 125 – 135 mm VA Fluoro 12.8 mm 130VAV SKF 135 – 145 mm VA Nitrile 12.8 mm 140VAR SKF 135 – 145 mm VA Fluoro 12.8 mm 140VAV SKF 145 – 155 mm VA Nitrile 12.8 mm 150VAR SKF 145 – 155 mm VA Fluoro 12.8 mm 150VAV SKF 155 – 165 mm VA Nitrile 14.5 mm 160VAR SKF 155 – 165 mm VA Fluoro 14.5 mm 160VAV SKF 165 – 175 mm VA Nitrile 14.5 mm 170VAR SKF 165 – 175 mm VA Fluoro 14.5 mm 170VAV SKF 175 – 185 mm VA Nitrile 14.5 mm 180VAR SKF 175 – 185 mm VA Fluoro 14.5 mm 180VAV SKF 185 – 195 mm VA Nitrile 14.5 mm 190VAR SKF 185 – 195 mm VA Fluoro 14.5 mm 190VAV SKF 190 – 210 mm VA Nitrile 25 mm 200VAR SKF 190 – 210 mm VA Fluoro 25 mm 200VAV SKF 195 – 210 mm VA Nitrile 14.5 mm 199VAR SKF 195 – 210 mm VA Fluoro 14.5 mm 199VAV SKF 210 – 235 mm VA Nitrile 25 mm 220VAR SKF 210 – 235 mm VA Fluoro 25 mm 220VAV SKF 235 – 265 mm VA Nitrile 25 mm 250VAR SKF 235 – 265 mm VA Fluoro 25 mm 250VAV SKF 265 – 290 mm VA Nitrile 25 mm 275VAR SKF 265 – 290 mm VA Fluoro 25 mm 275VAV SKF 290 – 310 mm VA Nitrile 25 mm 300VAR SKF 290 – 310 mm VA Fluoro 25 mm 300VAV SKF 310 – 335 mm VA Nitrile 25 mm 325VAR SKF 310 – 335 mm VA Fluoro 25 mm 325VAV SKF 335 – 365 mm VA Nitrile 25 mm 350VAR SKF 335 – 365 mm VA Fluoro 25 mm 350VAV SKF 365 – 390 mm VA Nitrile 25 mm 375VAR SKF 365 – 390 mm VA Fluoro 25 mm 375VAV SKF 390 – 430 mm VA Nitrile 25 mm 400VAR SKF 390 – 430 mm VA Fluoro 25 mm 400VAV SKF 430 – 480 mm VA Nitrile 25 mm 450VAR SKF 430 – 480 mm VA Fluoro 25 mm 450VAV SKF 480 – 530 mm VA Nitrile 25 mm 500VAR SKF 480 – 530 mm VA Fluoro 25 mm 500VAV SKF 530 – 580 mm VA Nitrile 25 mm 550VAR SKF 530 – 580 mm VA Fluoro 25 mm 550VAV SKF 580 – 630 mm VA Nitrile 25 mm 600VAR SKF 580 – 630 mm VA Fluoro 25 mm 600VAV SKF 630 – 665 mm VA Nitrile 25 mm 650VAR SKF 630 – 665 mm VA Fluoro 25 mm 650VAV SKF 665 – 705 mm VA Nitrile 25 mm 700VAR SKF 665 – 705 mm VA Fluoro 25 mm 700VAV SKF 705 – 745 mm VA Nitrile 25 mm 725VAR SKF 705 – 745 mm VA Fluoro 25 mm 725VAV SKF 745 – 785 mm VA Nitrile 25 mm 750VAR SKF 745 – 785 mm VA Fluoro 25 mm 750VAV SKF 785 – 830 mm VA Nitrile 25 mm 800VAR SKF 785 – 830 mm VA Fluoro 25 mm 800VAV SKF 830 – 875 mm VA Nitrile 25 mm 850VAR SKF 830 – 875 mm VA Fluoro 25 mm 850VAV SKF 875 – 920 mm VA Nitrile 25 mm 900VAR SKF 875 – 920 mm VA Fluoro 25 mm 900VAV SKF 920 – 965 mm VA Nitrile 25 mm 950VAR SKF 920 – 965 mm VA Fluoro 25 mm 950VAV SKF 965 – 1015 mm VA Nitrile 25 mm 1000VAR SKF 1015 – 1065 mm VA Nitrile 25 mm 1050VAR SKF 1065 – 1115 mm VA Nitrile 25 mm 1100VAR SKF 1115 – 1165 mm VA Nitrile 25 mm 1150VAR SKF 1165 – 1215 mm VA Nitrile 25 mm 1200VAR SKF 1215 – 1270 mm VA Nitrile 25 mm 1250VAR SKF 1270 – 1320 mm VA Nitrile 25 mm 1300VAR SKF 1320 – 1370 mm VA Nitrile 25 mm 1350VAR SKF 1370 – 1420 mm VA Nitrile 25 mm 1400VAR SKF 1420 – 1470 mm VA Nitrile 25 mm 1450VAR SKF 1470 – 1520 mm VA Nitrile 25 mm 1500VAR SKF 1520 – 1570 mm VA Nitrile 25 mm 1550VAR SKF 1570 – 1620 mm VA Nitrile 25 mm 1600VAR SKF 1620 – 1670 mm VA Nitrile 25 mm 1650VAR SKF 1720 – 1770 mm VA Nitrile 25 mm 1750VAR SKF 1970 – 2020 mm VA Nitrile 25 mm 2000VAR SKF 2270 – 2320 mm VA Nitrile 25 mm 2300VAR SKF 2310 – 2360 mm VA Nitrile 25 mm 2340VAR SKF
VS type
Shaft range Type Lip material Seal width Part number Brand
4.5 – 5.5 mm VS Nitrile 5.2 mm 5VSR SKF 4.5 – 5.5 mm VS Fluoro 5.2 mm 5VSV SKF 5.5 – 6.5 mm VS Nitrile 5.2 mm 6VSR SKF 5.5 – 6.5 mm VS Fluoro 5.2 mm 6VSV SKF 6.5 – 8 mm VS Nitrile 5.2 mm 7VSR SKF 6.5 – 8 mm VS Fluoro 5.2 mm 7VSV SKF 8 – 9.5 mm VS Nitrile 5.2 mm 8VSR SKF 8 – 9.5 mm VS Fluoro 5.2 mm 8VSV SKF 9.5 – 11.5 mm VS Nitrile 7.7 mm 10VSR SKF 9.5 – 11.5 mm VS Fluoro 7.7 mm 10VSV SKF 11.5 – 13.5 mm VS Nitrile 7.7 mm 12VSR SKF 11.5 – 13.5 mm VS Fluoro 7.7 mm 12VSV SKF 13.5 – 15.5 mm VS Nitrile 7.7 mm 14VSR SKF 13.5 – 15.5 mm VS Fluoro 7.7 mm 14VSV SKF 15.5 – 17.5 mm VS Nitrile 7.7 mm 16VSR SKF 15.5 – 17.5 mm VS Fluoro 7.7 mm 16VSV SKF 17.5 – 19 mm VS Nitrile 7.7 mm 18VSR SKF 17.5 – 19 mm VS Fluoro 7.7 mm 18VSV SKF 19 – 21 mm VS Nitrile 10.5 mm 20VSR SKF 19 – 21 mm VS Fluoro 10.5 mm 20VSV SKF 21 – 24 mm VS Nitrile 10.5 mm 22VSR SKF 21 – 24 mm VS Fluoro 10.5 mm 22VSV SKF 24 – 27 mm VS Nitrile 10.5 mm 25VSR SKF 24 – 27 mm VS Fluoro 10.5 mm 25VSV SKF 27 – 29 mm VS Nitrile 10.5 mm 28VSR SKF 27 – 29 mm VS Fluoro 10.5 mm 28VSV SKF 29 – 31 mm VS Nitrile 10.5 mm 30VSR SKF 29 – 31 mm VS Fluoro 10.5 mm 30VSV SKF 31 – 33 mm VS Nitrile 10.5 mm 32VSR SKF 31 – 33 mm VS Fluoro 10.5 mm 32VSV SKF 33 – 36 mm VS Nitrile 10.5 mm 35VSR SKF 33 – 36 mm VS Fluoro 10.5 mm 35VSV SKF 36 – 38 mm VS Nitrile 10.5 mm 38VSR SKF 36 – 38 mm VS Fluoro 10.5 mm 38VSV SKF 38 – 43 mm VS Nitrile 13 mm 40VSR SKF 38 – 43 mm VS Fluoro 13 mm 40VSV SKF 43 – 48 mm VS Nitrile 13 mm 45VSR SKF 43 – 48 mm VS Fluoro 13 mm 45VSV SKF 48 – 53 mm VS Nitrile 13 mm 50VSR SKF 48 – 53 mm VS Fluoro 13 mm 50VSV SKF 53 – 58 mm VS Nitrile 13 mm 55VSR SKF 53 – 58 mm VS Fluoro 13 mm 55VSV SKF 58 – 63 mm VS Nitrile 13 mm 60VSR SKF 58 – 63 mm VS Fluoro 13 mm 60VSV SKF 63 – 68 mm VS Nitrile 13 mm 65VSR SKF 63 – 68 mm VS Fluoro 13 mm 65VSV SKF 68 – 73 mm VS Nitrile 15.5 mm 70VSR SKF 68 – 73 mm VS Fluoro 15.5 mm 70VSV SKF 73 – 78 mm VS Nitrile 15.5 mm 75VSR SKF 73 – 78 mm VS Fluoro 15.5 mm 75VSV SKF 78 – 83 mm VS Nitrile 15.5 mm 80VSR SKF 78 – 83 mm VS Fluoro 15.5 mm 80VSV SKF 83 – 88 mm VS Nitrile 15.5 mm 85VSR SKF 83 – 88 mm VS Fluoro 15.5 mm 85VSV SKF 88 – 93 mm VS Nitrile 15.5 mm 90VSR SKF 88 – 93 mm VS Fluoro 15.5 mm 90VSV SKF 93 – 98 mm VS Nitrile 15.5 mm 95VSR SKF 93 – 98 mm VS Fluoro 15.5 mm 95VSV SKF 98 – 105 mm VS Nitrile 15.5 mm 100VSR SKF 98 – 105 mm VS Fluoro 15.5 mm 100VSV SKF 105 – 115 mm VS Nitrile 18 mm 110VSR SKF 105 – 115 mm VS Fluoro 18 mm 110VSV SKF 115 – 125 mm VS Nitrile 18 mm 120VSR SKF 115 – 125 mm VS Fluoro 18 mm 120VSV SKF 125 – 135 mm VS Nitrile 18 mm 130VSR SKF 125 – 135 mm VS Fluoro 18 mm 130VSV SKF 135 – 145 mm VS Nitrile 18 mm 140VSR SKF 135 – 145 mm VS Fluoro 18 mm 140VSV SKF 145 – 155 mm VS Nitrile 18 mm 150VSR SKF 145 – 155 mm VS Fluoro 18 mm 150VSV SKF 155 – 165 mm VS Nitrile 20.5 mm 160VSR SKF 155 – 165 mm VS Fluoro 20.5 mm 160VSV SKF 165 – 175 mm VS Nitrile 20.5 mm 170VSR SKF 165 – 175 mm VS Fluoro 20.5 mm 170VSV SKF 175 – 185 mm VS Nitrile 20.5 mm 180VSR SKF 175 – 185 mm VS Fluoro 20.5 mm 180VSV SKF 185 – 195 mm VS Nitrile 20.5 mm 190VSR SKF 185 – 195 mm VS Fluoro 20.5 mm 190VSV SKF 195 – 210 mm VS Nitrile 20.5 mm 199VSR SKF 195 – 210 mm VS Fluoro 20.5 mm 199VSV SKF
VL type
Shaft range Type Lip material Seal width Part number Brand
105 – 115 mm VL Nitrile 10.5 mm 110VLR SKF 105 – 115 mm VL Fluoro 10.5 mm 110VLV SKF 115 – 125 mm VL Nitrile 10.5 mm 120VLR SKF 115 – 125 mm VL Fluoro 10.5 mm 120VLV SKF 125 – 135 mm VL Nitrile 10.5 mm 130VLR SKF 125 – 135 mm VL Fluoro 10.5 mm 130VLV SKF 135 – 145 mm VL Nitrile 10.5 mm 140VLR SKF 135 – 145 mm VL Fluoro 10.5 mm 140VLV SKF 145 – 155 mm VL Nitrile 10.5 mm 150VLR SKF 145 – 155 mm VL Fluoro 10.5 mm 150VLV SKF 155 – 165 mm VL Nitrile 10.5 mm 160VLR SKF 155 – 165 mm VL Fluoro 10.5 mm 160VLV SKF 165 – 175 mm VL Nitrile 10.5 mm 170VLR SKF 165 – 175 mm VL Fluoro 10.5 mm 170VLV SKF 175 – 185 mm VL Nitrile 10.5 mm 180VLR SKF 175 – 185 mm VL Fluoro 10.5 mm 180VLV SKF 185 – 195 mm VL Nitrile 10.5 mm 190VLR SKF 185 – 195 mm VL Fluoro 10.5 mm 190VLV SKF 195 – 210 mm VL Nitrile 10.5 mm 200VLR SKF 195 – 210 mm VL Fluoro 10.5 mm 200VLV SKF 210 – 233 mm VL Nitrile 10.5 mm 220VLR SKF 210 – 233 mm VL Fluoro 10.5 mm 220VLV SKF 233 – 260 mm VL Nitrile 10.5 mm 250VLR SKF 233 – 260 mm VL Fluoro 10.5 mm 250VLV SKF 260 – 285 mm VL Nitrile 10.5 mm 275VLR SKF 260 – 285 mm VL Fluoro 10.5 mm 275VLV SKF 285 – 310 mm VL Nitrile 10.5 mm 300VLR SKF 285 – 310 mm VL Fluoro 10.5 mm 300VLV SKF 310 – 335 mm VL Nitrile 10.5 mm 325VLR SKF 310 – 335 mm VL Fluoro 10.5 mm 325VLV SKF 335 – 365 mm VL Nitrile 10.5 mm 350VLR SKF 335 – 365 mm VL Fluoro 10.5 mm 350VLV SKF 365 – 385 mm VL Nitrile 10.5 mm 375VLR SKF 365 – 385 mm VL Fluoro 10.5 mm 375VLV SKF 385 – 410 mm VL Nitrile 10.5 mm 400VLR SKF 385 – 410 mm VL Fluoro 10.5 mm 400VLV SKF 410 – 440 mm VL Nitrile 10.5 mm 425VLR SKF 410 – 440 mm VL Fluoro 10.5 mm 425VLV SKF 440 – 475 mm VL Nitrile 10.5 mm 450VLR SKF 440 – 475 mm VL Fluoro 10.5 mm 450VLV SKF 475 – 510 mm VL Nitrile 10.5 mm 500VLR SKF 475 – 510 mm VL Fluoro 10.5 mm 500VLV SKF 510 – 540 mm VL Nitrile 10.5 mm 525VLR SKF 510 – 540 mm VL Fluoro 10.5 mm 525VLV SKF 540 – 575 mm VL Nitrile 10.5 mm 550VLR SKF 540 – 575 mm VL Fluoro 10.5 mm 550VLV SKF 575 – 625 mm VL Nitrile 10.5 mm 600VLR SKF 575 – 625 mm VL Fluoro 10.5 mm 600VLV SKF 615 – 675 mm VL Nitrile 10.5 mm 650VLR SKF 615 – 675 mm VL Fluoro 10.5 mm 650VLV SKF 675 – 710 mm VL Nitrile 10.5 mm 700VLR SKF 675 – 710 mm VL Fluoro 10.5 mm 700VLV SKF 710 – 740 mm VL Nitrile 10.5 mm 725VLR SKF 710 – 740 mm VL Fluoro 10.5 mm 725VLV SKF 740 – 775 mm VL Nitrile 10.5 mm 750VLR SKF 740 – 775 mm VL Fluoro 10.5 mm 750VLV SKF 775 – 825 mm VL Nitrile 10.5 mm 800VLR SKF 775 – 825 mm VL Fluoro 10.5 mm 800VLV SKF 825 – 875 mm VL Nitrile 10.5 mm 850VLR SKF 875 – 925 mm VL Nitrile 10.5 mm 900VLR SKF 975 – 1025 mm VL Nitrile 10.5 mm 1000VLR SKF 1075 – 1125 mm VL Nitrile 10.5 mm 1100VLR SKF 1175 – 1225 mm VL Nitrile 10.5 mm 1200VLR SKF 1575 – 1625 mm VL Nitrile 10.5 mm 1600VLR SKF 1875 – 1925 mm VL Nitrile 10.5 mm 1900VLR SKF
VE type
Shaft range Type Lip material Seal width Part number Brand
300 – 305 mm VE Nitrile 65 mm 300VER SKF 310 – 315 mm VE Nitrile 65 mm 310VER SKF 315 – 320 mm VE Nitrile 65 mm 315VER SKF 320 – 325 mm VE Nitrile 65 mm 320VER SKF 330 – 335 mm VE Nitrile 65 mm 330VER SKF 345 – 350 mm VE Nitrile 65 mm 345VER SKF 350 – 355 mm VE Nitrile 65 mm 350VER SKF 360 – 365 mm VE Nitrile 65 mm 360VER SKF 370 – 375 mm VE Nitrile 65 mm 370VER SKF 375 – 380 mm VE Nitrile 65 mm 375VER SKF 380 – 385 mm VE Nitrile 65 mm 380VER SKF 390 – 395 mm VE Nitrile 65 mm 390VER SKF 395 – 400 mm VE Nitrile 65 mm 395VER SKF 400 – 405 mm VE Nitrile 65 mm 400VER SKF 405 – 410 mm VE Nitrile 65 mm 405VER SKF 420 – 425 mm VE Nitrile 65 mm 420VER SKF 430 – 435 mm VE Nitrile 65 mm 430VER SKF 435 – 440 mm VE Nitrile 65 mm 435VER SKF 440 – 445 mm VE Nitrile 65 mm 440VER SKF 445 – 450 mm VE Nitrile 65 mm 445VER SKF 450 – 455 mm VE Nitrile 65 mm 450VER SKF 455 – 460 mm VE Nitrile 65 mm 455VER SKF 460 – 465 mm VE Nitrile 65 mm 460VER SKF 465 – 470 mm VE Nitrile 65 mm 465VER SKF 470 – 475 mm VE Nitrile 65 mm 470VER SKF 475 – 480 mm VE Nitrile 65 mm 475VER SKF 480 – 485 mm VE Nitrile 65 mm 480VER SKF 485 – 490 mm VE Nitrile 65 mm 485VER SKF 490 – 495 mm VE Nitrile 65 mm 490VER SKF 495 – 500 mm VE Nitrile 65 mm 495VER SKF 500 – 505 mm VE Nitrile 65 mm 500VER SKF 505 – 510 mm VE Nitrile 65 mm 505VER SKF 510 – 515 mm VE Nitrile 65 mm 510VER SKF 515 – 520 mm VE Nitrile 65 mm 515VER SKF 520 – 525 mm VE Nitrile 65 mm 520VER SKF 525 – 530 mm VE Nitrile 65 mm 525VER SKF 530 – 535 mm VE Nitrile 65 mm 530VER SKF 535 – 540 mm VE Nitrile 65 mm 535VER SKF 545 – 550 mm VE Nitrile 65 mm 545VER SKF 550 – 555 mm VE Nitrile 65 mm 550VER SKF 555 – 560 mm VE Nitrile 65 mm 555VER SKF 560 – 565 mm VE Nitrile 65 mm 560VER SKF 570 – 575 mm VE Nitrile 65 mm 570VER SKF 575 – 580 mm VE Nitrile 65 mm 575VER SKF 580 – 585 mm VE Nitrile 65 mm 580VER SKF 585 – 590 mm VE Nitrile 65 mm 585VER SKF 590 – 600 mm VE Nitrile 65 mm 590VER SKF 600 – 610 mm VE Nitrile 65 mm 600VER SKF 610 – 620 mm VE Nitrile 65 mm 610VER SKF 620 – 630 mm VE Nitrile 65 mm 620VER SKF 630 – 640 mm VE Nitrile 65 mm 630VER SKF 640 – 650 mm VE Nitrile 65 mm 640VER SKF 650 – 660 mm VE Nitrile 65 mm 650VER SKF 660 – 670 mm VE Nitrile 65 mm 660VER SKF 670 – 680 mm VE Nitrile 65 mm 670VER SKF 680 – 690 mm VE Nitrile 65 mm 680VER SKF 690 – 700 mm VE Nitrile 65 mm 690VER SKF 700 – 710 mm VE Nitrile 65 mm 700VER SKF 710 – 720 mm VE Nitrile 65 mm 710VER SKF 720 – 730 mm VE Nitrile 65 mm 720VER SKF 730 – 740 mm VE Nitrile 65 mm 730VER SKF 740 – 750 mm VE Nitrile 65 mm 740VER SKF 750 – 758 mm VE Nitrile 65 mm 750VER SKF 758 – 766 mm VE Nitrile 65 mm 760VER SKF 766 – 774 mm VE Nitrile 65 mm 770VER SKF 792 – 801 mm VE Nitrile 65 mm 800VER SKF 801 – 810 mm VE Nitrile 65 mm 810VER SKF 810 – 821 mm VE Nitrile 65 mm 820VER SKF 821 – 831 mm VE Nitrile 65 mm 830VER SKF 831 – 841 mm VE Nitrile 65 mm 840VER SKF 841 – 851 mm VE Nitrile 65 mm 850VER SKF 851 – 861 mm VE Nitrile 65 mm 860VER SKF 861 – 871 mm VE Nitrile 65 mm 870VER SKF 882 – 892 mm VE Nitrile 65 mm 890VER SKF 892 – 912 mm VE Nitrile 65 mm 900VER SKF 912 – 922 mm VE Nitrile 65 mm 920VER SKF 922 – 933 mm VE Nitrile 65 mm 930VER SKF 933 – 944 mm VE Nitrile 65 mm 940VER SKF 944 – 955 mm VE Nitrile 65 mm 950VER SKF 966 – 977 mm VE Nitrile 65 mm 970VER SKF 977 – 988 mm VE Nitrile 65 mm 980VER SKF 988 – 999 mm VE Nitrile 65 mm 990VER SKF 999 – 1010 mm VE Nitrile 65 mm 1000VER SKF 1010 – 1025 mm VE Nitrile 65 mm 1020VER SKF 1025 – 1045 mm VE Nitrile 65 mm 1040VER SKF 1045 – 1065 mm VE Nitrile 65 mm 1060VER SKF 1065 – 1085 mm VE Nitrile 65 mm 1080VER SKF 1085 – 1105 mm VE Nitrile 65 mm 1100VER SKF 1105 – 1125 mm VE Nitrile 65 mm 1120VER SKF 1125 – 1145 mm VE Nitrile 65 mm 1140VER SKF 1135 – 1155 mm VE Nitrile 65 mm 1150VER SKF 1145 – 1165 mm VE Nitrile 65 mm 1160VER SKF 1165 – 1185 mm VE Nitrile 65 mm 1180VER SKF 1185 – 1205 mm VE Nitrile 65 mm 1200VER SKF 1245 – 1270 mm VE Nitrile 65 mm 1260VER SKF 1295 – 1315 mm VE Nitrile 65 mm 1300VER SKF 1340 – 1365 mm VE Nitrile 65 mm 1350VER SKF 1390 – 1415 mm VE Nitrile 65 mm 1400VER SKF 1465 – 1490 mm VE Nitrile 65 mm 1475VER SKF 1490 – 1515 mm VE Nitrile 65 mm 1500VER SKF 1570 – 1600 mm VE Nitrile 65 mm 1575VER SKF 1640 – 1680 mm VE Nitrile 65 mm 1650VER SKF 1810 – 1855 mm VE Nitrile 65 mm 1850VER SKF
Other designs (VR1, VR2 …)
Shaft range Type Lip material Seal width Part number Brand
3.5 – 4.5 mm VR1 Nitrile 3.7 mm 400040 SKF 3.5 – 4.5 mm VR1 Fluoro 3.7 mm 400044 SKF 4.5 – 5.5 mm VR1 Nitrile 3.7 mm 400050 SKF 4.5 – 5.5 mm VR2 Nitrile 5.2 mm 400051 SKF 4.5 – 5.5 mm VR1 Fluoro 3.7 mm 400054 SKF 4.5 – 5.5 mm VR2 Fluoro 5.2 mm 400055 SKF 5.5 – 6.5 mm VR1 Nitrile 3.7 mm 400060 SKF 5.5 – 6.5 mm VR2 Nitrile 5.2 mm 400061 SKF 5.5 – 6.5 mm VR1 Fluoro 3.7 mm 400064 SKF 5.5 – 6.5 mm VR2 Fluoro 5.2 mm 400065 SKF 6.5 – 8 mm VR1 Nitrile 3.7 mm 400070 SKF 6.5 – 8 mm VR2 Nitrile 5.2 mm 400071 SKF 6.5 – 8 mm VR1 Fluoro 3.7 mm 400074 SKF 6.5 – 8 mm VR2 Fluoro 5.2 mm 400075 SKF 8 – 9.5 mm VR1 Nitrile 3.7 mm 400080 SKF 8 – 9.5 mm VR2 Nitrile 5.2 mm 400081 SKF 8 – 9.5 mm VR1 Fluoro 3.7 mm 400084 SKF 8 – 9.5 mm VR2 Fluoro 5.2 mm 400085 SKF 9.5 – 11.5 mm VR1 Nitrile 5.5 mm 400100 SKF 9.5 – 11.5 mm VR2 Nitrile 7.7 mm 400101 SKF 9.5 – 11.5 mm VR1 Fluoro 5.5 mm 400104 SKF 9.5 – 11.5 mm VR2 Fluoro 7.7 mm 400105 SKF 11.5 – 12.5 mm VR1 Nitrile 5.5 mm 400120 SKF 11.5 – 12.5 mm VR2 Nitrile 7.7 mm 400121 SKF 11.5 – 12.5 mm VR1 Fluoro 5.5 mm 400124 SKF 11.5 – 12.5 mm VR2 Fluoro 7.7 mm 400125 SKF 12.5 – 13.5 mm VR1 Nitrile 5.5 mm 400130 SKF 12.5 – 13.5 mm VR1 Fluoro 5.5 mm 400134 SKF 13.5 – 15.5 mm VR1 Nitrile 5.5 mm 400140 SKF 13.5 – 15.5 mm VR2 Nitrile 7.7 mm 400141 SKF 13.5 – 15.5 mm VR1 Fluoro 5.5 mm 400144 SKF 13.5 – 15.5 mm VR2 Fluoro 7.7 mm 400145 SKF 15.5 – 17 mm VR1 Nitrile 5.5 mm 400160 SKF 15.5 – 17.5 mm VR2 Nitrile 7.7 mm 400161 SKF 15.5 – 17 mm VR1 Fluoro 5.5 mm 400164 SKF 15.5 – 17.5 mm VR2 Fluoro 7.7 mm 400165 SKF 17.5 – 19 mm VR1 Nitrile 5.5 mm 400180 SKF 17.5 – 19 mm VR2 Nitrile 7.7 mm 400181 SKF 17.5 – 19 mm VR1 Fluoro 5.5 mm 400184 SKF 17.5 – 19 mm VR2 Fluoro 7.7 mm 400185 SKF 19 – 21 mm VR1 Nitrile 7.5 mm 400200 SKF 19 – 21 mm VR2 Nitrile 10.5 mm 400201 SKF 19 – 21 mm VR1 Fluoro 7.5 mm 400204 SKF 19 – 21 mm VR2 Fluoro 10.5 mm 400205 SKF 21 – 24 mm VR1 Nitrile 7.5 mm 400220 SKF 21 – 24 mm VR2 Nitrile 10.5 mm 400221 SKF 21 – 24 mm VR1 Fluoro 7.5 mm 400224 SKF 21 – 24 mm VR2 Fluoro 10.5 mm 400225 SKF 24 – 27 mm VR1 Nitrile 7.5 mm 400250 SKF 24 – 27 mm VR2 Nitrile 10.5 mm 400251 SKF 24 – 27 mm VR1 Fluoro 7.5 mm 400254 SKF 24 – 27 mm VR2 Fluoro 10.5 mm 400255 SKF 27 – 29 mm VR1 Nitrile 7.5 mm 400280 SKF 27 – 29 mm VR2 Nitrile 10.5 mm 400281 SKF 27 – 29 mm VR1 Fluoro 7.5 mm 400284 SKF 27 – 29 mm VR2 Fluoro 10.5 mm 400285 SKF 29 – 31 mm VR1 Nitrile 7.5 mm 400300 SKF 29 – 31 mm VR2 Nitrile 10.5 mm 400301 SKF 29 – 31 mm VR1 Fluoro 7.5 mm 400304 SKF 29 – 31 mm VR2 Fluoro 10.5 mm 400305 SKF 31 – 33 mm VR1 Nitrile 7.5 mm 400320 SKF 31 – 33 mm VR2 Nitrile 10.5 mm 400321 SKF 31 – 33 mm VR1 Fluoro 7.5 mm 400324 SKF 31 – 33 mm VR2 Fluoro 10.5 mm 400325 SKF 33 – 36 mm VR1 Nitrile 7.5 mm 400350 SKF 33 – 36 mm VR2 Nitrile 10.5 mm 400351 SKF 33 – 36 mm VR1 Fluoro 7.5 mm 400354 SKF 33 – 36 mm VR2 Fluoro 10.5 mm 400355 SKF 36 – 38 mm VR1 Nitrile 7.5 mm 400380 SKF 36 – 38 mm VR2 Nitrile 10.5 mm 400381 SKF 36 – 38 mm VR1 Fluoro 7.5 mm 400384 SKF 36 – 38 mm VR2 Fluoro 10.5 mm 400385 SKF 38 – 43 mm VR1 Nitrile 9 mm 400400 SKF 38 – 43 mm VR2 Nitrile 13 mm 400401 SKF 38 – 43 mm VR2 Fluoro 13 mm 400405 SKF 38 – 43 mm VR1 Fluoro 9 mm 400409 SKF 43 – 48 mm VR1 Nitrile 9 mm 400450 SKF 43 – 48 mm VR2 Nitrile 13 mm 400451 SKF 43 – 48 mm VR1 Fluoro 9 mm 400454 SKF 43 – 48 mm VR2 Fluoro 13 mm 400455 SKF 48 – 53 mm VR1 Nitrile 9 mm 400500 SKF 48 – 53 mm VR2 Nitrile 13 mm 400501 SKF 48 – 53 mm VR1 Fluoro 9 mm 400504 SKF 48 – 53 mm VR2 Fluoro 13 mm 400505 SKF 53 – 58 mm VR1 Nitrile 9 mm 400550 SKF 53 – 58 mm VR2 Nitrile 13 mm 400551 SKF 53 – 58 mm VR1 Fluoro 9 mm 400554 SKF 53 – 58 mm VR2 Fluoro 13 mm 400555 SKF 58 – 63 mm VR1 Nitrile 9 mm 400600 SKF 58 – 63 mm VR2 Nitrile 13 mm 400601 SKF 58 – 63 mm VR1 Fluoro 9 mm 400604 SKF 58 – 63 mm VR2 Fluoro 13 mm 400605 SKF 63 – 68 mm VR1 Nitrile 9 mm 400650 SKF 63 – 68 mm VR2 Nitrile 13 mm 400651 SKF 63 – 68 mm VR1 Fluoro 9 mm 400654 SKF 63 – 68 mm VR2 Fluoro 13 mm 400655 SKF 68 – 73 mm VR1 Nitrile 11 mm 400700 SKF 68 – 73 mm VR2 Nitrile 15.5 mm 400701 SKF 68 – 73 mm VR1 Fluoro 11 mm 400704 SKF 68 – 73 mm VR2 Fluoro 15.5 mm 400705 SKF 73 – 78 mm VR1 Nitrile 11 mm 400750 SKF 73 – 78 mm VR2 Nitrile 11 mm 400751 SKF 73 – 78 mm VR2 Fluoro 15.5 mm 400755 SKF 78 – 83 mm VR1 Nitrile 11 mm 400800 SKF 78 – 83 mm VR2 Nitrile 15.5 mm 400801 SKF 78 – 83 mm VR1 Fluoro 11 mm 400804 SKF 78 – 83 mm VR2 Fluoro 15.5 mm 400805 SKF 83 – 88 mm VR1 Nitrile 11 mm 400850 SKF 83 – 88 mm VR2 Nitrile 15.5 mm 400851 SKF 83 – 88 mm VR1 Fluoro 11 mm 400854 SKF 83 – 88 mm VR2 Fluoro 15.5 mm 400855 SKF 88 – 93 mm VR1 Nitrile 11 mm 400900 SKF 88 – 93 mm VR2 Nitrile 15.5 mm 400901 SKF 88 – 93 mm VR1 Fluoro 11 mm 400904 SKF 88 – 93 mm VR2 Fluoro 15.5 mm 400905 SKF 93 – 98 mm VR1 Nitrile 11 mm 400950 SKF 93 – 98 mm VR2 Nitrile 15.5 mm 400951 SKF 93 – 98 mm VR1 Fluoro 11 mm 400954 SKF 93 – 98 mm VR2 Fluoro 15.5 mm 400955 SKF 98 – 105 mm VR1 Nitrile 11 mm 401000 SKF 98 – 105 mm VR2 Nitrile 15.5 mm 401001 SKF 98 – 105 mm VR1 Fluoro 11 mm 401004 SKF 98 – 105 mm VR2 Fluoro 15.5 mm 401005 SKF 105 – 115 mm VR1 Nitrile 12.8 mm 401100 SKF 105 – 115 mm VR2 Nitrile 18 mm 401101 SKF 105 – 115 mm VR3 Nitrile 10.5 mm 401102 SKF 105 – 115 mm VR1 Fluoro 12.8 mm 401104 SKF 105 – 115 mm VR2 Fluoro 18 mm 401105 SKF 105 – 115 mm VR3 Fluoro 10.5 mm 401106 SKF 115 – 125 mm VR1 Nitrile 12.8 mm 401200 SKF 115 – 125 mm VR2 Nitrile 18 mm 401201 SKF 115 – 125 mm VR3 Nitrile 10.5 mm 401202 SKF 115 – 125 mm VR1 Fluoro 12.8 mm 401204 SKF 115 – 125 mm VR2 Fluoro 18 mm 401205 SKF 115 – 125 mm VR3 Fluoro 10.5 mm 401206 SKF 125 – 135 mm VR1 Nitrile 12.8 mm 401300 SKF 125 – 135 mm VR2 Nitrile 18 mm 401301 SKF 125 – 135 mm VR3 Nitrile 10.5 mm 401302 SKF 125 – 135 mm VR1 Fluoro 12.8 mm 401304 SKF 125 – 135 mm VR2 Fluoro 18 mm 401305 SKF 125 – 135 mm VR3 Fluoro 10.5 mm 401306 SKF 135 – 145 mm VR1 Nitrile 12.8 mm 401400 SKF 135 – 145 mm VR2 Nitrile 18 mm 401401 SKF 135 – 145 mm VR3 Nitrile 10.5 mm 401402 SKF 135 – 145 mm VR1 Fluoro 12.8 mm 401404 SKF 135 – 145 mm VR2 Fluoro 18 mm 401405 SKF 135 – 145 mm VR3 Fluoro 10.5 mm 401406 SKF 145 – 155 mm VR1 Nitrile 12.8 mm 401500 SKF 145 – 155 mm VR2 Nitrile 18 mm 401501 SKF 145 – 155 mm VR3 Nitrile 10.5 mm 401502 SKF 145 – 155 mm VR1 Fluoro 12.8 mm 401504 SKF 145 – 155 mm VR2 Fluoro 18 mm 401505 SKF 145 – 155 mm VR3 Fluoro 10.5 mm 401506 SKF 155 – 165 mm VR1 Nitrile 14.5 mm 401600 SKF 155 – 165 mm VR2 Nitrile 20.5 mm 401601 SKF 155 – 165 mm VR3 Nitrile 10.5 mm 401602 SKF 155 – 165 mm VR1 Fluoro 14.5 mm 401604 SKF 155 – 165 mm VR2 Fluoro 20.5 mm 401605 SKF 155 – 165 mm VR3 Fluoro 10.5 mm 401606 SKF 165 – 175 mm VR1 Nitrile 14.5 mm 401700 SKF 165 – 175 mm VR2 Nitrile 20.5 mm 401701 SKF 165 – 175 mm VR3 Nitrile 10.5 mm 401702 SKF 165 – 175 mm VR1 Fluoro 14.5 mm 401704 SKF 165 – 175 mm VR2 Fluoro 20.5 mm 401705 SKF 165 – 175 mm VR3 Fluoro 10.5 mm 401706 SKF 175 – 185 mm VR1 Nitrile 14.5 mm 401800 SKF 175 – 185 mm VR2 Nitrile 20.5 mm 401801 SKF 175 – 185 mm VR3 Nitrile 10.5 mm 401802 SKF 175 – 185 mm VR1 Fluoro 14.5 mm 401804 SKF 175 – 185 mm VR2 Fluoro 20.5 mm 401805 SKF 175 – 185 mm VR3 Fluoro 10.5 mm 401806 SKF 185 – 195 mm VR1 Nitrile 14.5 mm 401900 SKF 185 – 195 mm VR2 Nitrile 20.5 mm 401901 SKF 185 – 195 mm VR3 Nitrile 10.5 mm 401902 SKF 185 – 195 mm VR1 Fluoro 14.5 mm 401904 SKF 185 – 195 mm VR2 Fluoro 20.5 mm 401905 SKF 185 – 195 mm VR3 Fluoro 10.5 mm 401906 SKF 190 – 210 mm VR1 Nitrile 25 mm 402000 SKF 190 – 210 mm VR1 Fluoro 25 mm 402004 SKF 195 – 210 mm VR1 Nitrile 14.5 mm 401990 SKF 195 – 210 mm VR2 Nitrile 20.5 mm 401991 SKF 195 – 210 mm VR1 Fluoro 14.5 mm 401994 SKF 195 – 210 mm VR2 Fluoro 20.5 mm 401995 SKF 195 – 210 mm VR3 Nitrile 10.5 mm 4020022 SKF 195 – 210 mm VR3 Fluoro 10.5 mm 402006 SKF 210 – 235 mm VR1 Nitrile 25 mm 402200 SKF 210 – 233 mm VR3 Nitrile 10.5 mm 402202 SKF 210 – 235 mm VR1 Fluoro 25 mm 402204 SKF 210 – 233 mm VR3 Fluoro 10.5 mm 402206 SKF 233 – 260 mm VR3 Nitrile 10.5 mm 402502 SKF 233 – 260 mm VR3 Fluoro 10.5 mm 402506 SKF 235 – 265 mm VR1 Nitrile 25 mm 402500 SKF 235 – 265 mm VR1 Fluoro 25 mm 402504 SKF 260 – 285 mm VR3 Nitrile 10.5 mm 402752 SKF 260 – 285 mm VR3 Fluoro 10.5 mm 402756 SKF 265 – 290 mm VR1 Nitrile 25 mm 402750 SKF 265 – 290 mm VR1 Fluoro 25 mm 402754 SKF 285 – 310 mm VR3 Nitrile 10.5 mm 403002 SKF 285 – 310 mm VR3 Fluoro 10.5 mm 403006 SKF 290 – 310 mm VR1 Nitrile 25 mm 403000 SKF 290 – 310 mm VR1 Fluoro 25 mm 403004 SKF 300 – 305 mm VR4 Nitrile 65 mm 403003 SKF 300 – 305 mm VR6 Nitrile 65 mm 470301 SKF 305 – 310 mm VR4 Nitrile 65 mm 403053 SKF 310 – 315 mm VRME Nitrile 65 mm 310VRMER SKF 310 – 315 mm VR4 Nitrile 65 mm 403103 SKF 310 – 335 mm VR1 Nitrile 25 mm 403250 SKF 310 – 335 mm VR3 Nitrile 10.5 mm 403252 SKF 310 – 335 mm VR1 Fluoro 25 mm 403254 SKF 310 – 335 mm VR3 Fluoro 10.5 mm 403256 SKF 310 – 315 mm VR6 Nitrile 65 mm 470311 SKF 315 – 320 mm VR4 Nitrile 65 mm 403153 SKF 320 – 325 mm VR4 Nitrile 65 mm 403203 SKF 325 – 330 mm VR4 Nitrile 65 mm 403253 SKF 325 – 330 mm VR6 Nitrile 65 mm 470326 SKF 330 – 335 mm VR4 Nitrile 65 mm 403303 SKF 335 – 340 mm VR4 Nitrile 65 mm 403353 SKF 335 – 365 mm VR1 Nitrile 25 mm 403500 SKF 335 – 365 mm VR3 Nitrile 10.5 mm 403502 SKF 335 – 365 mm VR1 Fluoro 25 mm 403504 SKF 335 – 365 mm VR3 Fluoro 10.5 mm 403506 SKF 340 – 345 mm VR4 Nitrile 65 mm 403403 SKF 340 – 345 mm VR6 Nitrile 65 mm 470341 SKF 345 – 350 mm VR4 Nitrile 65 mm 403453 SKF 350 – 355 mm VR6 Nitrile 65 mm 470351 SKF 360 – 365 mm VR4 Nitrile 65 mm 403603 SKF 365 – 370 mm VR4 Nitrile 65 mm 403653 SKF 365 – 390 mm VR1 Nitrile 25 mm 403750 SKF 365 – 385 mm VR3 Nitrile 10.5 mm 403752 SKF 365 – 390 mm VR1 Fluoro 25 mm 403754 SKF 365 – 385 mm VR3 Fluoro 10.5 mm 403756 SKF 370 – 375 mm VR4 Nitrile 65 mm 403703 SKF 370 – 375 mm VR6 Nitrile 65 mm 470371 SKF 375 – 380 mm VR4 Nitrile 65 mm 403753 SKF 375 – 380 mm VR6 Nitrile 65 mm 470376 SKF 380 – 385 mm VR4 Nitrile 65 mm 403803 SKF 380 – 385 mm VR6 Nitrile 65 mm 470381 SKF 385 – 390 mm VR4 Nitrile 65 mm 403853 SKF 385 – 410 mm VR3 Nitrile 10.5 mm 404002 SKF 385 – 410 mm VR3 Fluoro 10.5 mm 4040066 SKF 390 – 395 mm VRME Nitrile 65 mm 390VRMER SKF 390 – 395 mm VR4 Nitrile 65 mm 403903 SKF 390 – 430 mm VR1 Nitrile 25 mm 404000 SKF 390 – 430 mm VR1 Fluoro 25 mm 4040044 SKF 390 – 395 mm VR6 Nitrile 65 mm 470391 SKF 395 – 400 mm VR4 Nitrile 65 mm 403953 SKF 400 – 405 mm VR4 Nitrile 65 mm 4040033 SKF 400 – 405 mm VR6 Nitrile 65 mm 470401 SKF 405 – 410 mm VR4 Nitrile 65 mm 404053 SKF 410 – 415 mm VR4 Nitrile 65 mm 404103 SKF 410 – 440 mm VR3 Nitrile 10.5 mm 404252 SKF 410 – 440 mm VR3 Fluoro 10.5 mm 404256 SKF 410 – 415 mm VR6 Nitrile 65 mm 470411 SKF 415 – 420 mm VR4 Nitrile 65 mm 404153 SKF 420 – 425 mm VR4 Nitrile 65 mm 404203 SKF 420 – 425 mm VRME Nitrile 65 mm 420VRMER SKF 420 – 425 mm VR6 Nitrile 65 mm 470421 SKF 430 – 435 mm VR4 Nitrile 65 mm 404303 SKF 430 – 480 mm VR1 Nitrile 25 mm 404500 SKF 430 – 480 mm VR1 Fluoro 25 mm 404504 SKF 435 – 440 mm VR4 Nitrile 65 mm 404353 SKF 440 – 445 mm VR4 Nitrile 65 mm 4044033 SKF 440 – 475 mm VR3 Nitrile 10.5 mm 404502 SKF 440 – 475 mm VR3 Fluoro 10.5 mm 404506 SKF 450 – 455 mm VR4 Nitrile 65 mm 404503 SKF 450 – 455 mm VR5 Nitrile 100 mm 470450 SKF 455 – 460 mm VR4 Nitrile 65 mm 404553 SKF 460 – 465 mm VR4 Nitrile 65 mm 4046033 SKF 460 – 465 mm VR6 Nitrile 65 mm 470461 SKF 465 – 470 mm VR4 Nitrile 65 mm 404653 SKF 470 – 475 mm VR4 Nitrile 65 mm 404703 SKF 475 – 480 mm VR4 Nitrile 65 mm 404753 SKF 475 – 510 mm VR3 Nitrile 10.5 mm 405002 SKF 475 – 510 mm VR3 Fluoro 10.5 mm 405009 SKF 475 – 480 mm VR6 Nitrile 65 mm 470476 SKF 480 – 485 mm VR4 Nitrile 65 mm 404803 SKF 480 – 530 mm VR1 Nitrile 25 mm 405000 SKF 480 – 530 mm VR1 Fluoro 25 mm 405004 SKF 485 – 490 mm VR4 Nitrile 65 mm 404853 SKF 490 – 495 mm VR4 Nitrile 65 mm 404903 SKF 495 – 500 mm VR6 Nitrile 65 mm 470496 SKF 500 – 505 mm VR4 Nitrile 65 mm 405003 SKF 505 – 510 mm VR4 Nitrile 65 mm 405053 SKF 510 – 515 mm VR4 Nitrile 65 mm 405103 SKF 510 – 540 mm VR3 Nitrile 10.5 mm 405252 SKF 510 – 540 mm VR3 Fluoro 10.5 mm 405256 SKF 515 – 520 mm VR4 Nitrile 65 mm 405153 SKF 520 – 525 mm VR4 Nitrile 65 mm 405203 SKF 525 – 530 mm VR4 Nitrile 65 mm 405253 SKF 525 – 530 mm VR6 Nitrile 65 mm 470526 SKF 530 – 535 mm VR4 Nitrile 65 mm 405303 SKF 530 – 580 mm VR1 Nitrile 25 mm 405500 SKF 530 – 580 mm VR1 Fluoro 25 mm 405504 SKF 535 – 540 mm VR4 Nitrile 65 mm 405353 SKF 540 – 545 mm VR4 Nitrile 65 mm 405403 SKF 540 – 575 mm VR3 Nitrile 10.5 mm 405502 SKF 540 – 575 mm VR3 Fluoro 10.5 mm 405506 SKF 545 – 550 mm VR4 Nitrile 65 mm 405453 SKF 550 – 555 mm VR4 Nitrile 65 mm 405503 SKF 550 – 555 mm VR5 Nitrile 100 mm 470550 SKF 555 – 560 mm VR4 Nitrile 65 mm 405553 SKF 560 – 565 mm VR4 Nitrile 65 mm 405603 SKF 565 – 570 mm VR4 Nitrile 65 mm 405653 SKF 570 – 575 mm VR4 Nitrile 65 mm 405703 SKF 575 – 580 mm VR4 Nitrile 65 mm 405753 SKF 575 – 625 mm VR3 Nitrile 10.5 mm 4060022 SKF 580 – 585 mm VR4 Nitrile 65 mm 405803 SKF 580 – 630 mm VR1 Nitrile 25 mm 406000 SKF 585 – 590 mm VR4 Nitrile 65 mm 405853 SKF 590 – 600 mm VR4 Nitrile 65 mm 405903 SKF 600 – 610 mm VR4 Nitrile 65 mm 406003 SKF 600 – 610 mm VR5 Nitrile 100 mm 470600 SKF 610 – 620 mm VR4 Nitrile 65 mm 4061033 SKF 615 – 675 mm VR3 Nitrile 10.5 mm 406502 SKF 615 – 675 mm VR3 Fluoro 10.5 mm 406506 SKF 620 – 630 mm VR4 Nitrile 65 mm 4062033 SKF 630 – 640 mm VR4 Nitrile 65 mm 4063033 SKF 630 – 665 mm VR1 Nitrile 25 mm 406500 SKF 630 – 665 mm VR1 Fluoro 25 mm 406504 SKF 640 – 650 mm VR4 Nitrile 65 mm 4064033 SKF 650 – 660 mm VR4 Nitrile 65 mm 406503 SKF 650 – 660 mm VR5 Nitrile 100 mm 470650 SKF 650 – 660 mm VR6 Nitrile 65 mm 470651 SKF 650 – 660 mm VRME Nitrile 65 mm 650VRMER SKF 660 – 670 mm VR4 Nitrile 65 mm 4066033 SKF 660 – 670 mm VR6 Nitrile 65 mm 470661 SKF 665 – 705 mm VR1 Nitrile 25 mm 407000 SKF 665 – 705 mm VR1 Fluoro 25 mm 407004 SKF 670 – 680 mm VR4 Nitrile 65 mm 406703 SKF 670 – 680 mm VR6 Nitrile 65 mm 470671 SKF 670 – 680 mm VRME Nitrile 65 mm 670VRMER SKF 675 – 710 mm VR3 Nitrile 10.5 mm 407002 SKF 675 – 710 mm VR3 Fluoro 10.5 mm 407006 SKF 680 – 690 mm VR4 Nitrile 65 mm 406803 SKF 680 – 690 mm VR6 Nitrile 65 mm 470681 SKF 680 – 690 mm VRME Nitrile 65 mm 680VRMER SKF 690 – 700 mm VR4 Nitrile 65 mm 406903 SKF 690 – 700 mm VR6 Nitrile 65 mm 470691 SKF 690 – 700 mm VRME Nitrile 65 mm 690VRMER SKF 700 – 710 mm VR4 Nitrile 65 mm 407003 SKF 700 – 710 mm VR5 Nitrile 100 mm 470700 SKF 705 – 745 mm VR1 Nitrile 25 mm 407250 SKF 705 – 745 mm VR1 Fluoro 25 mm 407254 SKF 710 – 740 mm VR3 Fluoro 10.5 mm 407256 SKF 720 – 730 mm VR4 Nitrile 65 mm 407203 SKF 730 – 740 mm VR4 Nitrile 65 mm 407309 SKF 740 – 750 mm VR4 Nitrile 65 mm 407403 SKF 740 – 775 mm VR3 Nitrile 10.5 mm 407502 SKF 740 – 775 mm VR3 Fluoro 10.5 mm 407506 SKF 745 – 785 mm VR1 Nitrile 25 mm 407500 SKF 745 – 785 mm VR1 Fluoro 25 mm 407504 SKF 750 – 758 mm VR4 Nitrile 65 mm 407503 SKF 750 – 758 mm VR5 Nitrile 100 mm 470750 SKF 750 – 758 mm VR6 Nitrile 65 mm 470751 SKF 750 – 758 mm VRME Nitrile 65 mm 750VRMER SKF 758 – 766 mm VR6 Nitrile 65 mm 470761 SKF 758 – 766 mm VRME Nitrile 65 mm 760VRMER SKF 766 – 774 mm VR4 Nitrile 65 mm 407703 SKF 775 – 825 mm VR3 Nitrile 10.5 mm 408002 SKF 775 – 825 mm VR3 Fluoro 10.5 mm 408006 SKF 783 – 792 mm VR4 Nitrile 65 mm 407903 SKF 783 – 792 mm VR6 Nitrile 65 mm 470791 SKF 785 – 830 mm VR1 Nitrile 25 mm 408000 SKF 785 – 830 mm VR1 Fluoro 25 mm 408004 SKF 792 – 801 mm VR4 Nitrile 65 mm 408003 SKF 792 – 801 mm VR5 Nitrile 100 mm 470800 SKF 792 – 801 mm VR6 Nitrile 65 mm 470801 SKF 801 – 810 mm VR4 Nitrile 65 mm 408103 SKF 810 – 821 mm VR4 Nitrile 65 mm 408203 SKF 821 – 831 mm VRME Nitrile 65 mm 830VRMER SKF 825 – 875 mm VR3 Nitrile 10.5 mm 408502 SKF 825 – 875 mm VR3 Fluoro 10.5 mm 408506 SKF 830 – 875 mm VR1 Nitrile 25 mm 408500 SKF 831 – 841 mm VR4 Nitrile 65 mm 408403 SKF 841 – 851 mm VR4 Nitrile 65 mm 408503 SKF 841 – 851 mm VR5 Nitrile 100 mm 470850 SKF 851 – 861 mm VR4 Nitrile 65 mm 408603 SKF 861 – 871 mm VR4 Nitrile 65 mm 408703 SKF 871 – 882 mm VR4 Nitrile 65 mm 408803 SKF 871 – 882 mm VR6 Nitrile 65 mm 470881 SKF 871 – 882 mm VRME Nitrile 65 mm 880VRMER SKF 875 – 920 mm VR1 Nitrile 25 mm 409000 SKF 875 – 920 mm VR1 Fluoro 25 mm 409004 SKF 875 – 925 mm VR3 Fluoro 10.5 mm 409006 SKF 882 – 892 mm VR4 Nitrile 65 mm 408903 SKF 892 – 912 mm VR4 Nitrile 65 mm 409003 SKF 892 – 912 mm VR5 Nitrile 100 mm 470900 SKF 892 – 912 mm VR6 Nitrile 65 mm 470901 SKF 892 – 912 mm VRME Nitrile 65 mm 900VRMER SKF 912 – 922 mm VR4 Nitrile 65 mm 409203 SKF 920 – 965 mm VR1 Nitrile 25 mm 409500 SKF 920 – 965 mm VR1 Fluoro 25 mm 409504 SKF 922 – 933 mm VR4 Nitrile 65 mm 409303 SKF 925 – 975 mm VR3 Nitrile 10.5 mm 409502 SKF 925 – 975 mm VR3 Fluoro 10.5 mm 409506 SKF 933 – 944 mm VR4 Nitrile 65 mm 409403 SKF 944 – 955 mm VR4 Nitrile 65 mm 409503 SKF 944 – 955 mm VR5 Nitrile 100 mm 470950 SKF 955 – 966 mm VR4 Nitrile 65 mm 409603 SKF 966 – 977 mm VR4 Nitrile 65 mm 409703 SKF 975 – 1025 mm VR3 Nitrile 10.5 mm 410002 SKF 975 – 1025 mm VR3 Fluoro 10.5 mm 410006 SKF 977 – 988 mm VR4 Nitrile 65 mm 409803 SKF 977 – 988 mm VR6 Nitrile 65 mm 470981 SKF 977 – 988 mm VRME Nitrile 65 mm 980VRMER SKF 988 – 999 mm VR4 Nitrile 65 mm 409903 SKF 999 – 1010 mm VR4 Nitrile 65 mm 410003 SKF 999 – 1010 mm VR5 Nitrile 100 mm 471000 SKF 1010 – 1025 mm VR4 Nitrile 65 mm 410203 SKF 1015 – 1065 mm VR1 Nitrile 25 mm 410500 SKF 1025 – 1045 mm VR4 Nitrile 65 mm 410403 SKF 1025 – 1075 mm VR3 Nitrile 10.5 mm 410502 SKF 1025 – 1045 mm VR6 Nitrile 65 mm 471041 SKF 1045 – 1065 mm VR4 Nitrile 65 mm 410603 SKF 1065 – 1085 mm VR4 Nitrile 65 mm 410803 SKF 1065 – 1115 mm VR1 Nitrile 25 mm 411000 SKF 1075 – 1125 mm VR3 Nitrile 10.5 mm 411002 SKF 1075 – 1125 mm VR3 Fluoro 10.5 mm 411006 SKF 1085 – 1105 mm VR4 Nitrile 65 mm 411003 SKF 1085 – 1105 mm VR5 Nitrile 100 mm 471100 SKF 1105 – 1125 mm VR4 Nitrile 65 mm 411203 SKF 1115 – 1165 mm VR1 Nitrile 25 mm 411500 SKF 1125 – 1145 mm VR4 Nitrile 65 mm 411403 SKF 1125 – 1175 mm VR3 Nitrile 10.5 mm 411502 SKF 1125 – 1175 mm VR3 Fluoro 10.5 mm 411506 SKF 1145 – 1165 mm VR4 Nitrile 65 mm 411603 SKF 1165 – 1185 mm VR4 Nitrile 65 mm 411803 SKF 1165 – 1215 mm VR1 Nitrile 25 mm 412000 SKF 1175 – 1225 mm VR3 Nitrile 10.5 mm 412002 SKF 1185 – 1205 mm VR4 Nitrile 65 mm 412003 SKF 1185 – 1205 mm VR5 Nitrile 100 mm 471200 SKF 1185 – 1205 mm VR6 Nitrile 65 mm 471201 SKF 1205 – 1225 mm VR4 Nitrile 65 mm 412203 SKF 1215 – 1270 mm VR1 Nitrile 25 mm 412500 SKF 1225 – 1275 mm VR3 Nitrile 10.5 mm 412502 SKF 1225 – 1275 mm VR3 Fluoro 10.5 mm 412506 SKF 1270 – 1295 mm VR4 Nitrile 65 mm 412803 SKF 1270 – 1380 mm VR1 Nitrile 25 mm 413000 SKF 1275 – 1325 mm VR3 Nitrile 10.5 mm 413002 SKF 1275 – 1325 mm VR3 Fluoro 10.5 mm 413006 SKF 1295 – 1315 mm VR4 Nitrile 65 mm 413003 SKF 1295 – 1315 mm VR5 Nitrile 100 mm 471300 SKF 1315 – 1340 mm VR4 Nitrile 65 mm 413253 SKF 1320 – 1370 mm VR1 Nitrile 25 mm 413500 SKF 1325 – 1375 mm VR3 Nitrile 10.5 mm 413502 SKF 1325 – 1375 mm VR3 Fluoro 10.5 mm 413506 SKF 1340 – 1365 mm VR5 Nitrile 100 mm 471350 SKF 1365 – 1390 mm VR4 Nitrile 65 mm 413753 SKF 1370 – 1420 mm VR1 Nitrile 25 mm 414000 SKF 1375 – 1425 mm VR3 Nitrile 10.5 mm 414002 SKF 1375 – 1425 mm VR3 Fluoro 10.5 mm 414006 SKF 1390 – 1415 mm VR4 Nitrile 65 mm 414003 SKF 1390 – 1415 mm VR5 Nitrile 100 mm 471400 SKF 1415 – 1440 mm VR4 Nitrile 65 mm 414253 SKF 1415 – 1440 mm VR6 Nitrile 65 mm 471426 SKF 1425 – 1475 mm VR3 Nitrile 10.5 mm 414502 SKF 1425 – 1475 mm VR3 Fluoro 10.5 mm 414506 SKF 1440 – 1465 mm VR4 Nitrile 65 mm 414503 SKF 1440 – 1465 mm VR5 Nitrile 100 mm 471450 SKF 1440 – 1465 mm VR6 Nitrile 65 mm 471451 SKF 1465 – 1490 mm VR4 Nitrile 65 mm 414753 SKF 1470 – 1520 mm VR1 Nitrile 25 mm 415000 SKF 1475 – 1525 mm VR3 Nitrile 10.5 mm 415002 SKF 1490 – 1515 mm VR4 Nitrile 65 mm 415003 SKF 1490 – 1515 mm VR5 Nitrile 100 mm 471500 SKF 1490 – 1515 mm VR6 Nitrile 65 mm 471501 SKF 1515 – 1540 mm VR4 Nitrile 65 mm 415253 SKF 1520 – 1570 mm VR1 Nitrile 25 mm 415500 SKF 1525 – 1575 mm VR3 Nitrile 10.5 mm 415502 SKF 1525 – 1575 mm VR3 Fluoro 10.5 mm 415506 SKF 1540 – 1570 mm VR4 Nitrile 65 mm 415503 SKF 1540 – 1570 mm VR5 Nitrile 100 mm 471550 SKF 1540 – 1570 mm VR6 Nitrile 65 mm 471551 SKF 1570 – 1600 mm VR4 Nitrile 65 mm 415753 SKF 1570 – 1620 mm VR1 Nitrile 25 mm 416000 SKF 1575 – 1625 mm VR3 Nitrile 10.5 mm 416002 SKF 1575 – 1625 mm VR3 Fluoro 10.5 mm 416006 SKF 1600 – 1640 mm VR4 Nitrile 65 mm 416003 SKF 1600 – 1640 mm VR5 Nitrile 100 mm 471600 SKF 1620 – 1670 mm VR1 Nitrile 25 mm 416500 SKF 1625 – 1675 mm VR3 Nitrile 10.5 mm 416502 SKF 1625 – 1675 mm VR3 Fluoro 10.5 mm 416506 SKF 1640 – 1680 mm VR4 Nitrile 65 mm 416503 SKF 1640 – 1680 mm VR5 Nitrile 100 mm 471650 SKF 1670 – 1720 mm VR1 Nitrile 25 mm 417000 SKF 1675 – 1725 mm VR3 Nitrile 10.5 mm 417002 SKF 1675 – 1725 mm VR3 Fluoro 10.5 mm 417006 SKF 1680 – 1720 mm VR4 Nitrile 65 mm 417003 SKF 1680 – 1720 mm VR5 Nitrile 100 mm 471700 SKF 1680 – 1720 mm VR6 Nitrile 65 mm 471701 SKF 1720 – 1765 mm VR4 Nitrile 65 mm 417503 SKF 1720 – 1765 mm VR5 Nitrile 100 mm 471750 SKF 1720 – 1765 mm VR6 Nitrile 65 mm 471751 SKF 1725 – 1775 mm VR3 Nitrile 10.5 mm 417502 SKF 1725 – 1775 mm VR3 Fluoro 10.5 mm 417506 SKF 1765 – 1810 mm VR4 Nitrile 65 mm 418003 SKF 1765 – 1810 mm VR5 Nitrile 100 mm 471800 SKF 1775 – 1825 mm VR3 Nitrile 10.5 mm 418002 SKF 1775 – 1825 mm VR3 Fluoro 10.5 mm 418006 SKF 1810 – 1855 mm VR4 Nitrile 65 mm 418503 SKF 1810 – 1855 mm VR5 Nitrile 100 mm 471850 SKF 1810 – 1855 mm VR6 Nitrile 65 mm 471851 SKF 1820 – 1870 mm VR1 Nitrile 25 mm 418500 SKF 1825 – 1875 mm VR3 Nitrile 10.5 mm 418502 SKF 1825 – 1875 mm VR3 Fluoro 10.5 mm 418506 SKF 1855 – 1905 mm VR4 Nitrile 65 mm 419003 SKF 1855 – 1905 mm VR5 Nitrile 100 mm 471900 SKF 1855 – 1905 mm VR6 Nitrile 65 mm 471901 SKF 1870 – 1920 mm VR1 Nitrile 25 mm 419000 SKF 1875 – 1925 mm VR3 Nitrile 10.5 mm 419002 SKF 1875 – 1925 mm VR3 Fluoro 10.5 mm 419006 SKF 1905 – 1955 mm VR4 Nitrile 65 mm 419503 SKF 1905 – 1955 mm VR5 Nitrile 100 mm 471950 SKF 1905 – 1955 mm VR6 Nitrile 65 mm 471951 SKF 1920 – 1970 mm VR1 Nitrile 25 mm 419500 SKF 1925 – 1975 mm VR3 Nitrile 10.5 mm 419502 SKF 1925 – 1975 mm VR3 Fluoro 10.5 mm 419506 SKF 1955 – 2010 mm VR4 Nitrile 65 mm 420003 SKF 1955 – 2010 mm VR5 Nitrile 100 mm 472000 SKF 1970 – 2020 mm VR1 Nitrile 25 mm 420000 SKF 1975 – 2025 mm VR3 Nitrile 10.5 mm 420002 SKF 1975 – 2025 mm VR3 Fluoro 10.5 mm 420006 SKF
Part numbers and designations are those of the original manufacturers and are given for identification. cBallast is an independent supplier; confirm ratings against the nameplate of the installed equipment before ordering. Table generated from the cBallast catalogue on 2026-09-29.
Compiled by cBallast for identification and cross-reference. Part numbers, designations and trademarks belong to their respective manufacturers. Confirm ratings and dimensions against the manufacturer's current documentation and the nameplate of the installed equipment before ordering or installation.