Siemens 6ES7136-6PA00-0BC0 — SIMATIC S7 automation module. Compact controller or expansion module for the S7-1200 or S7-1500 PLC platform. Failsafe powermodul F-PM.
Siemens 6ES7136-6PA00-0BC0 — SIMATIC S7 automation module. Compact controller or expansion module for the S7-1200 or S7-1500 PLC platform. Failsafe powermodul F-PM.
| Manufacturer part number (MPN) | 6ES7136-6PA00-0BC0 |
| EAN / GTIN | 4025515082767 |
| Sales unit | pcs |
| Product type designation | F-PM-E 24 V DC/8 A PPM ST |
| Usable BaseUnits | BU type C0 |
| Color code for module-specific color-coded label | CC52 |
| Product function — I&M data | Yes; I&M0 to I&M3 |
| Engineering with — STEP 7 TIA Portal configurable/integrated from version | V12 |
| Engineering with — STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| Engineering with — PROFINET from GSD version/GSD revision | V2.31 |
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 20.4 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Current consumption (rated value) | 75 mA; without load |
| Current consumption, max. | 21 mA; From the backplane bus |
| Number of outputs | 2 |
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 2.1 A) |
| Output current — up to 60 °C, max. | 0.3 A |
| 24 V encoder supply — 24 V | Yes; min. L+ (-1.5 V) |
| 24 V encoder supply — Output current, max. | 600 mA; Total current of all encoders |
| Power consumption from the backplane bus | 70 mW |
| Power loss, typ. | 5 W |
| Address space per module — Inputs | 7 byte |
| Address space per module — Outputs | 5 byte |
| Number of digital inputs | 2 |
| Input voltage — Rated value (DC) | 24 V |
| Input voltage — for signal "0" | -30 to +5 V |
| Input voltage — for signal "1" | +15 to +30 V |
| Input current — for signal "1", typ. | 3.7 mA |
| For standard inputs — at "0" to "1", min. | 0.4 ms |
| For standard inputs — at "0" to "1", max. | 20 ms |
| For standard inputs — at "1" to "0", min. | 0.4 ms |
| For standard inputs — at "1" to "0", max. | 20 ms |
| Cable length — shielded, max. | 1 000 m |
| Cable length — unshielded, max. | 500 m |
| Number of digital outputs | 1 |
| Digital outputs, parameterizable — Response threshold, typ. | > 14.8 A |
| Open-circuit detection — Response threshold, typ. | 8 mA |
| Overload protection — Response threshold, typ. | 8.8 A |
| Limitation of inductive shutdown voltage to | Max. -1.5 V |
| Switching capacity of the outputs — with resistive load, max. | 8 A |
| Switching capacity of the outputs — on lamp load, max. | 100 W |
| Load resistance range — lower limit | 3 Ω |
| Load resistance range — upper limit | 2 000 Ω |
| Output voltage — for signal "1", min. | 24 V; L+ (-0.5 V) |
| Output current — for signal "1" rated value | 8 A |
| Output current — for signal "0" residual current, max. | 1.5 mA; PP-switching: max. 1.5 mA; PM-switching: max. 1 mA |
| Switching frequency — with resistive load, max. | 10 Hz; Symmetrical |
| Switching frequency — with inductive load, max. | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical |
| Switching frequency — on lamp load, max. | 4 Hz; Symmetrical |
| Total current of the outputs — Current per channel, max. | 8 A; note derating data in the manual |
| Total current of the outputs — Current per module, max. | 8 A; note derating data in the manual |
| Isolation tested with | 707 V DC (type test) |
| Highest safety class achievable in safety mode — SIL acc. to IEC 61508 | SIL 3 |
| Ambient temperature during operation — horizontal installation, min. | 0 °C |
| Ambient temperature during operation — horizontal installation, max. | 60 °C |
| Ambient temperature during operation — vertical installation, min. | 0 °C |
| Ambient temperature during operation — vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level — Installation altitude above sea level, max. | 4 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP System Manual |
| Dimensions — Width | 20 mm |
| Dimensions — Height | 73 mm |
| Dimensions — Depth | 58 mm |
| Weight, approx. | 70 g |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Suitable for safety functions | Yes |
| Type of voltage (input voltage) | DC |
| Redundancy | No |
| Output voltage DC | 20.4–28.8 V |
| Input voltage DC | 20.4–28.8 V |
| Type of output voltage | DC |
| Country of origin | Germany |
| MOQ | 1 |