Siemens 6EP1962-2BA00 — SITOP DC power supply. DIN-rail primary-switched regulated 24 VDC power supply for automation panels. SITOP PSE202U Redundansmodul, In:/Out: 24 V DC Wattage <100 VA.
Siemens 6EP1962-2BA00 — SITOP DC power supply. DIN-rail primary-switched regulated 24 VDC power supply for automation panels. SITOP PSE202U Redundansmodul, In:/Out: 24 V DC Wattage <100 VA.
| Manufacturer part number (MPN) | 6EP1962-2BA00 |
| EAN / GTIN | 4025515153047 |
| Sales unit | pcs |
| Type of the power supply network | DC voltage |
| Supply voltage at DC | 24 V |
| Input voltage at DC | 19 ... 29 V |
| Voltage curve at output | Controlled, isolated DC voltage |
| Output voltage at DC rated value | 24 V |
| Formula for output voltage | Vin - approx. 0.5 V |
| Output voltage — at output 1 at DC rated value | 24 V |
| Output voltage adjustable | No |
| Display version for normal operation | Green LED for "both input voltages > switching threshold"; red LED for "at least one input voltage < switching threshold" or "output switched off" |
| Type of signal at output | Isolated relay contact (contact rating 6 A/42 V AC, 30 V DC, but max. 100 VA): Contact closed if one or both input voltages < switching threshold or output is switched off. Setting range of switching threshold 20 V ±0.5 V to 25 V ±0.5 V |
| Output current — rated value | 3.8 A |
| Output current — rated range | 3.5 A; 4.3 A at 19 V, 2.8 A at 28.5 V; maximum aggregate current in the event of an error according to NEC class 2 limit 8 A |
| Efficiency in percent | 94.8 % |
| Power loss [W] — at rated output voltage for rated value of the output current typical | 5 W |
| Power loss [W] — during no-load operation maximum | 2 W |
| Galvanic isolation between input and output | No |
| Galvanic isolation | relay contact: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| Operating resource protection class | Class III |
| Protection class IP | IP20 |
| Standard — for emitted interference | EN 55022 Class B |
| Standard — for interference immunity | EN 61000-6-2 |
| Shipbuilding approval | No |
| Ambient temperature — during operation | -20 ... +70 °C; with natural convection |
| Ambient temperature — during transport | -40 ... +85 °C |
| Ambient temperature — during storage | -40 ... +85 °C |
| Type of electrical connection | screw terminal |
| Type of electrical connection — at input | Input, output and ground: removable screw terminal, each 1 x 0.5 ... 2.5 mm² single-core/finely stranded |
| Type of electrical connection — for auxiliary contacts | Relay contact: 2 screw terminals for 0.5 ... 2.5 mm² single-core/finely stranded |
| Width × height × depth of the enclosure | 30 × 80 × 100 mm |
| Installation width × mounting height | 30 mm × 180 mm |
| Required spacing — top | 50 mm |
| Required spacing — bottom | 50 mm |
| Fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| Fastening method — DIN-rail mounting | Yes |
| Fastening method — S7 rail mounting | No |
| Fastening method — wall mounting | No |
| Housing can be lined up | Yes |
| Mechanical data — net weight | 0.125 kg |
| Electrical accessories | Removable spring-type terminal 6EP1971-5BA00 |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| Voltage type (supply voltage) | DC |
| 1st secondary output voltage | 24 V |
| Max. output current 1 | 3.5 A |
| Secondary voltage adjustable | No |
| Nominal value output voltage 1 | 24 V |
| Nominal value output current 1 | 3.8 A |
| Rated supply voltage DC | 24 V |
| Output voltage stabilized | Yes |
| Type of electric connection | Screw connection |
| Suitable for rail mounting | Yes |
| Wall mounting possible | No |
| Suitable for distribution board | Yes |
| Built-in width | 30 mm |
| Built-in height | 180 mm |
| Direct mounting possible | No |
| Width | 30 mm |
| Height | 80 mm |
| Depth | 100 mm |
| Suitable for safety functions | No |
| Degree of protection (IP) | IP20 |
| Suitable for wall mounting | No |
| Country of origin | Germany |
| MOQ | 1 |