Siemens 6EP3336-3SB00-0AX0 — SITOP DC power supply. DIN-rail primary-switched regulated 24 VDC power supply for automation panels. SITOP PSU4200 1AC 5A input: 120 - 240V AC output: 24V DC/20A.
Siemens 6EP3336-3SB00-0AX0 — SITOP DC power supply. DIN-rail primary-switched regulated 24 VDC power supply for automation panels. SITOP PSU4200 1AC 5A input: 120 - 240V AC output: 24V DC/20A.
| Manufacturer part number (MPN) | 6EP3336-3SB00-0AX0 EAN / GTIN: 4025515156277 Sales unit: pcs Type of the power supply network: 1-phase AC Supply voltage at AC — minimum rated value: 120 V Supply voltage at AC — maximum rated value: 240 V Wide range input: Yes Buffering time for rated value of the output current in the event of power failure minimum: 15 ms Operating condition of the mains buffering: at Vin = 120/240 V Line frequency: 50/60 Hz Input current — at rated input voltage 120 V: 4.5 A Input current — at rated input voltage 230 V: 2.4 A Current limitation of inrush current at 25 °C maximum: 20 A I2t value maximum: 3 A²·s Fuse protection type: 6.3 A Fuse protection type in the feeder: Recommended miniature circuit breaker: from 10 A characteristic C to from 16 A characteristic C Voltage curve at output: Controlled, isolated DC voltage Output voltage at DC rated value: 24 V Output voltage adjustable: Yes; via potentiometer Adjustable output voltage: 24 ... 28 V Relative overall tolerance of the voltage: 3 % Residual ripple — maximum: 150 mV Display version for normal operation: Green LED for 24 V OK Type of signal at output: Signal contact (signal load capacity: 10 mA) for DC OK Behavior of the output voltage when switching on: No overshoot of Vout (soft start) Output current — rated value: 20 A Output current — rated range: 0 ... 20 A; +60 ... +70 °C: Derating 3%/K Supplied active power typical: 480 W Bridging of equipment: Yes Efficiency in percent: 93 % Power loss [W] — at rated output voltage for rated value of the output current typical: 37 W Design of the overvoltage protection: < 32 V Property of the output short-circuit proof: Yes Design of short-circuit protection: Shutdown and periodic restart attempts Enduring short circuit current RMS value — typical: 6 A Galvanic isolation: Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) Operating resource protection class: Class I Leakage current — maximum: 0.7 mA Protection class IP: IP20 Standard — for emitted interference: EN 55032 Class A Standard — for interference immunity: EN 61000-6-2 MTBF at 40 °C: 1 065 000 h Ambient temperature — during operation: -25 ... +70 °C; with natural convection Ambient temperature — during storage: -40 ... +85 °C Type of electrical connection: push-in terminals Connection method — at input: L |
| N PE | push-in for 0.5 ... 4 mm² Connection method — at output: +, -: push-in for 0.5 ... 6 mm² Width × height × depth of the enclosure: 70 × 135 × 125 mm Installation width × mounting height: 70 mm × 225 mm Fastening method: Snaps onto DIN rail EN 60715 35x7.5/15 Mechanical data — net weight: 0.93 kg Voltage type (supply voltage): AC 1st secondary output voltage: 24 V Max. output current 1: 20 A Secondary voltage adjustable: Yes Nominal value output voltage 1: 24 V Nominal value output current 1: 20 A Short-circuit-proof: Yes Rated supply voltage AC 50 Hz: 240 V Rated supply voltage AC 60 Hz: 120 V Output voltage stabilized: Yes Power output: 480 W Stabilized: Yes Type of electric connection: Spring clamp connection Suitable for rail mounting: Yes Wall mounting possible: No Suitable for distribution board: Yes Built-in width: 70 mm Built-in height: 225 mm Direct mounting possible: No Width: 70 mm Height: 135 mm Depth: 125 mm Degree of protection (IP): IP20 Suitable for wall mounting: No Country of origin: Austria |
| MOQ | 1 |