Schneider Electric ABL1REM24062 Phaseo ABL1 modular regulated SMPS, 100-240V AC input, 24V DC / 6A / 150W output. Compact DIN rail device with diagnostics LED.
Schneider Electric ABL1REM24062 Phaseo ABL1 modular regulated SMPS, 100-240V AC input, 24V DC / 6A / 150W output. Compact DIN rail device with diagnostics LED.
| Series | Phaseo ABL1 REM |
| Input Voltage | 100-240V AC, 1-phase, 50/60Hz |
| Output Voltage | 24V DC regulated |
| Output Current | 6A |
| Output Power | 150W |
| Protections | Short-circuit, overcurrent, over-temperature, overvoltage |
| Mounting | 35mm DIN rail |
| Ip Rating | IP20 |
| Voltage | 24 V |
| Range of product | Phaseo Dedicated |
| Product or component type | Power supply |
| Power supply type | Regulated switch mode |
| Rated power in W | 150 W |
| Main Input Voltage | 100...120 V AC single phase; 200...240 V AC single phase; 180...370 V DC |
| Output voltage | 24 V DC |
| Power supply output current | 6.2 A |
| Operating position | Any position |
| Vibration resistance | 2 gn (f= 9…150 Hz) conforming to EN/IEC 61131-2; 3.5 mm (f= 5…9 Hz) conforming to EN/IEC 61131-2 |
| Name of test | Conducted interference conforming to EN 61000-4-8 level 4; Electrostatic discharges conforming to EN/IEC 61000-4-2 level 3; Induced electromagnetic field conforming to EN/IEC 61000-4-6 level 3; Radiated electromagnetic field conforming to EN/IEC 61000-4-3 level 3; Rapid transient conforming to IEC 61000-4-4 level 3; Conducted/radiated emissions conforming to EN 55022 class B; Conducted/radiated emissions conforming to EN/IEC 55011; Emission conforming to EN/IEC 61000-6-3; Primary outage conforming to IEC 61000-4-11; Surge conforming to EN/IEC 61000-4-5 |
| Input voltage limits | 170...264 V; 85...132 V |
| Network frequency | 47...63 Hz |
| Inrush current | 50 A at 115 V AC; 100 A at 230 V AC |
| Cos phi | 0.65 |
| Efficiency | 80 % |
| Power dissipation in W | 37.5 W |
| Current consumption | 5 A at 100 V; 2.5 A at 240 V |
| Input protection type | Integrated fuse (not interchangeable) |
| Output voltage limits | 21.6...26.4 V |
| Line and load regulation | +/- 3 % |
| Holding time | >= 10 ms at 100 V; >= 40 ms at 240 V |
| Output protection type | Against overload, protection technology: 1.1...1.5 x In; Against overvoltage, protection technology: tripping if U > 1.25 x Un; Against short-circuits, protection technology: automatic reset; Thermal |
| Connections - terminals | For ground connection: screw type terminals, connection capacity: 1 x 4 mm² 12 AWG; For input connection: screw type terminals, connection capacity: 2 x 4 mm² 12 AWG; For output connection: screw type terminals, connection capacity: 4 x 4 mm² 12 AWG |
| Marking | CE |
| Mounting support | Reversible mounting bracket; Panel |
| Operating altitude | 2000 m |
| Output coupling | Series; Parallel |
| Overvoltage category | II |
| Meantime between failure [MTBF] | 100000 h at 40 °C |
| Status LED | 1 LED (green) output voltage |
| Product weight | 0.73 kg |
| Product certifications | TUV 60950-1; KC; RCM; cCSAus; CSA 22-2 No 60950-1; EAC; UL 508 |
| Environmental characteristic | EMC conforming to EN 50081-1; EMC conforming to EN 50082-2; EMC conforming to EN 61000-6-3; EMC conforming to EN/IEC 61000-6-2; Safety conforming to EN/IEC 60950-1; Safety conforming to SELV |
| IP degree of protection | IP20 conforming to EN/IEC 60950 |
| Ambient air temperature for operation | 0…45 °C (without derating); 45…60 °C (with derating factor) |
| Ambient air temperature for storage | -25…85 °C |
| Relative humidity | 20…90 % |
| Pollution degree | 2 |
| Dielectric strength | 1500 V between input and ground; 3000 V between input and output; 500 V between output and ground |
| Number of Units in Package 1 | 1 |
| Country of origin | CN |
| Warranty (in months) | 18 |
| EAN | 3389110638332 |
| Primary standard | IEC 61204; EN 60950-1 |
| MOQ | 1 |
Compact DIN-rail 24V DC SMPS for control circuits. Diagnostic LED for output OK indication.