| Manufacturer part number (MPN) | A9MEM1520 |
| EAN / GTIN | 3606480909122 |
| HS code | 8536.90 |
| Sales unit | pcs |
| Package quantity | 48 pcs |
| Rated current | 63 A |
| Number of poles | 1P |
| Range of product | PowerLogic |
| Product name | PowerTag A9 M63 |
| Product or component type | Energy sensor |
| Poles | 1P |
| Maximum current [Imax] | 63 A |
| [Ib] Basic current | 10 A |
| Starting current | 40 mA |
| Saturation current | 130 A |
| Product specific application | Load monitoring; Overload alarm; Cost allocation; Circuit monitoring; Energy management |
| Concentrator compatibility | EcoStruxure Panel Server Entry; EcoStruxure Panel Server Universal; EcoStruxure Panel Server Advanced; Wiser hub generation 2; Acti9 Smartlink SI B; Acti9 Smartlink SI D; Acti9 PowerTag Link; Acti9 PowerTag Link HD |
| Application | Buildings: breaker voltage monitoring; Buildings: cost allocation; Buildings: overload alarm |
| Range compatibility | Acti9 Acti9 iKQE RCBO; Multi9 Multi9 C60; Multi9 Multi9 ID; Multi9 Multi9 C32N; Multi9 Multi9 C65; Acti9 Acti9 iID; Acti9 Acti9 iID K; Acti9 Acti9 iK60; Acti9 Acti9 iKQ; Acti9 Acti9 K60; Acti9 Acti9 Reflex iC60; Acti9 Acti9 iC65; Acti9 Acti9 DT60; Acti9 Acti9 iC60 single terminal |
| Type of measurement | Voltage; Power factor; Active energy; Current; Active power |
| Accuracy class | Class 1 current conforming to IEC 61557-12; Class 0.5 voltage conforming to IEC 61557-12; Class 1 active power conforming to IEC 61557-12; Class 1 active energy conforming to IEC 61557-12; Class 1 power factor conforming to IEC 61557-12 |
| Mounting location | Top or bottom |
| Mounting support | On circuit breaker |
| Product destination | Switchboard |
| Event management | Voltage loss with measured current at voltage loss |
| Transmission support medium | Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4 |
| Emission power | 10 mW |
| Form factor | Monoconnect |
| Mounting mode | By screws (terminals) |
| Electrical connection (voltage sensing & power supply) | Connector tooth and wire |
| Cable cross section | 1 rigid cable 1.5…16 mm²; 2 stranded cable 1.5…2.5 mm²; 2 rigid cable 1.5…2.5 mm²; 1 stranded cable 1.5…16 mm² |
| Cable length | 1 m |
| supply voltage | 200...240 V AC, +/- 20 % |
| Cable composition | 1 x 0.33 mm² |
| Network frequency | 50 Hz; 60 Hz |
| Maximum power consumption | 1 VA |
| Standards | IEC 61557-12; IEC 61010-1; IEC 61010-2-030; IEC 61326-1; ETSI EN 300 328; ETSI EN 301 489-1 |
| Product certifications | IEC; DNV Marine |
| Height | 16.5 mm |
| Width | 18 mm |
| Depth | 43 mm |
| Product weight | 16.4 g |
| Colour | White (RAL 9003) |
| Compatibility code | PowerTag A9 M63 |
| Quality labels | CE |
| Directives | 2014/53/EU - radio equipment directive |
| Operating altitude | 0...2000 m |
| Ambient air temperature for operation | -25…60 °C |
| Ambient air temperature for storage | -40…85 °C |
| Overvoltage category | III conforming to IEC 61010-1 |
| Measurement category | Category III conforming to IEC 61010-2-030 |
| IP degree of protection | IP20 conforming to IEC 60529 |
| IK degree of protection | IK05 |
| Pollution degree | 3 |
| Relative humidity | 0…95 % at 45 °C conforming to IEC 60721-3-3 |
| Vibration resistance | 3M4 conforming to IEC 60721-3-3 |
| Electromagnetic compatibility | Industrial electromagnetic environment conforming to IEC 61326-1; Radiated EMC conforming to ETSI EN 301 489-17; Electromagnetic emission conforming to IEC 62311 |
| environmental characteristics | Dustproof class 3S3 conforming to IEC 60721-3-3; Salt mist class 3C2 conforming to IEC 60721-3-3; Indoor use |
| Country of origin | LV |
| Warranty (in months) | 18 |
