Schneider Electric SRTG20KXLI APC -UPS On-Line, 20kVA/20kW, Rack/Tower, 230V/400V, HW(3P+N+E)(1P+N+PE), NMC, without rail kit.
Schneider Electric SRTG20KXLI APC -UPS On-Line, 20kVA/20kW, Rack/Tower, 230V/400V, HW(3P+N+E)(1P+N+PE), NMC, without rail kit.
| Manufacturer part number (MPN) | SRTG20KXLI |
| EAN / GTIN | 0731304411901 |
| Sales unit | pcs |
| Voltage | 230 V |
| Main input voltage | 230 V AC 1 phase; 400 V AC 3 phases |
| Other input voltage | 380...415 V; 220...240 V |
| Maximum input current | 87 A |
| Input harmonic distortion | Less than 5 % for full load |
| Load power factor | From 0.9 leading to 1 lagging |
| Switching current capacity | 125 A |
| Efficiency at full load | 160...285 V full load; 100...285 V half load |
| Input connection | 1 hard wire 5 wire (3P + N + E); 1 hard wire 3-wire (1P + N + E) |
| Input frequency | 40...70 Hz auto-sensing |
| Output voltage | 230 V AC 1 phase; 400 V AC 3 phases |
| Other output voltage | 230 V |
| Rated power in W | 20000 W |
| Rated power in VA | 20000 VA |
| Output connection | 1 IEC 60320 |
| Bypass type | Internal bypass (automatic and manual) |
| Crest factor | 3 : 1 |
| Harmonic distortion | Less than 2 % |
| Maximum configurable power in VA | 20000 VA |
| Maximum configurable power in W | 20000 W |
| Output overload operation | 60 seconds at 125% and 30 seconds at 150% |
| UPS topology | On-Line |
| Waveform type | Its wave |
| Efficiency | 94.5 % |
| Output frequency | 50/60 Hz +/- 4 Hz sync to mains |
| Replacement battery | APCRBC172 |
| Run Time | View Runtime Graph |
| Additional information | Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage; Configurable for 220 : 230 or 240 nominal output voltage |
| Battery type | Lead-acid external included |
| Emergency power off | Yes |
| Free slot | 0 |
| Preinstalled device | Network management card 3 with environmental monitoring |
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| UPS connectivity | Serial port; USB port; Pre-installed network management card 3 |
| Surge energy rating | 600 J |
| Noise filtering | Full time multi-pole noise filtering : 0.3% IEEE surge light-through : zero clamping response time : meets UL 1449 |
| Number of rack unit | 7U |
| Color | Black (RAL 9005) |
| Height | 306 mm |
| Width | 440 mm |
| Depth | 835 mm |
| Product weight | 142.5 kg |
| Mounting location | Front |
| Mounting preference | Lower |
| Mounting mode | Rack-mounted |
| Two post mountable | 0 |
| USB compatible | Yes |
| Mounting position | Horizontal |
| Provided equipment | 1 x USB cable; 1 x RJ45 cable; 2 x rack mounting brackets; 2 x stabilization/wall mounting feet; 2 x installation manual; 1 x C13-C14 power cord; 1 x external battery pack; 1 x battery cable |
| Number of power module filled slots | 0 |
| Number of power module free slots | 0 |
| Redundant | No |
| Range of product | Smart-UPS On-Line |
| Product or component type | Uninterruptible power supply (UPS) |
| Product certification | CE; UKCA; TISI |
| Standard | EN/IEC 62040-1:2019/A11:2021; EN/IEC 62040-2:2006/AC:2006; EN/IEC 62040-2:2018 |
| Ambient air temperature for operation | 0…40 °C |
| Ambient air temperature for storage | -15…45 °C |
| Storage altitude | 0…15000 m |
| IP protection | IP20 |
| Relative humidity | 0…95 % non-condensing |
| Storage relative humidity | 0…95 % non-condensing |
| Acoustic level | 58 dBA |
| Heat dissipation | 3821 Btu/h |
| Operating altitude | 0...3000 m |
| Battery voltage | +/- 192 V |
| Extendable runtime | 1 |
| Included battery module | 0 |
| Empty battery slot | 0 |
| Typical recharge time | 4 h |
| RBC quantity | 2 |
| Battery life | 3…5 year(s) |
| Battery charging power | 2160 W rated |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 53.5 cm |
| Package 1 Width | 79.0 cm |
| Package 1 Length | 59.0 cm |
| Package 1 Weight | 157.2 kg |
| Country of origin | CN |
| Warranty (in months) | 36 UPS|24 Battery |
| MOQ | 1 |