Schneider Electric STBEPI2145K STB kit Tesys U motor starter, 12 in/8 out.
Schneider Electric STBEPI2145K STB kit Tesys U motor starter, 12 in/8 out.
| Manufacturer part number (MPN) | STBEPI2145K |
| EAN / GTIN | 3595863933130 |
| Sales unit | pcs |
| Package quantity | 10 pcs |
| Range of product | Modicon STB distributed I/O solution |
| Product or component type | Parallel interface kit |
| Product specific application | TeSys Quickfit; TeSys U |
| Kit composition | Terminal spring clamp connector; STBXBA3000 base; Terminal screw type connector; STBEPI2145 module |
| Number of input channels | 12 |
| input voltage | 24 V |
| Input voltage type | DC |
| Input voltage limits | 15...30 V at state 1; -3...5 V at state 0 |
| Current state 0 guaranteed | <= 0.5 mA |
| Current state 1 guaranteed | >= 2 mA |
| Number of output channels | 8 |
| output voltage | 24 V |
| Output voltage type | DC |
| Protection type | Power protection integrated fuse on PDM time lag 10 A; Overload protection; Short-circuit protection; Input protection resistor-limited |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs; User configurable standard NIMs |
| Electrical connection | 4 RJ45 connectors |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Product compatibility | Power distribution module STBPDT3100/3105; Mounting base STBXBA3000 |
| Current consumption | <= 100 mA at 24 V DC for sensor bus; <= 220 mA at 24 V DC for actuator bus for 150 ms; 100 mA at 5 V DC for logic bus; 50 mA at 24 V DC for actuator bus (with all 8 outputs at state 0); 80 mA at 24 V DC for actuator bus per output at state 1 |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (green) module status (RDY); 1 LED (red) module error (ERR); 2 LEDs (green) switch position (S1 and S2); 4 LEDs (green) output status |
| Depth | 170 mm |
| Height | 28.1 mm |
| Width | 128.3 mm |
| Product weight | 0.165 kg |
| Product certifications | FM Class 1 Division 2; UL; CSA |
| Pollution degree | 2 conforming to IEC 60664-1 |
| Operating altitude | <= 2000 m |
| IP degree of protection | IP20 conforming to IEC 61131-2 class 1 |
| Ambient air temperature for operation | -25…70 °C (without derating) |
| Ambient air temperature for storage | -40…85 °C |
| Relative humidity | 95 % at 60 °C without condensation |
| Vibration resistance | 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm at 10…58 Hz |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Number of Units in Package 1 | 1 |
| Number of Units in Package 2 | 20 |
| Number of Units in Package 3 | 320 |
| Country of origin | ID |
| Warranty (in months) | 18 |
| Certified for UL hazardous location division 1 | No |
| Certified for UL hazardous location division 2 | No |
| Certified for UL hazardous location group A (acetylene) | No |
| Certified for UL hazardous location group B (hydrogen) | No |
| Certified for UL hazardous location group C (ethylene) | No |
| Certified for UL hazardous location group D (propane) | No |
| Certified for UL hazardous location group E (metal dusts) | No |
| Certified for UL hazardous location class I | No |
| Certified for UL hazardous location class II | No |
| Certified for UL hazardous location class III | No |
| Supporting protocol for EtherCAT | No |
| Supply voltage DC | 24 V |
| Voltage type (supply voltage) | DC |
| Number of digital inputs | 12 |
| Number of digital outputs | 8 |
| Digital inputs configurable | No |
| Digital outputs configurable | Yes |
| Input current at signal 1 | 2 mA |
| Permitted voltage at input | -3–30 V |
| Type of voltage (input voltage) | DC |
| Output current | 0.8 A |
| Permitted voltage at output | 24 V |
| Type of output voltage | DC |
| Short-circuit protection, outputs available | Yes |
| Number of HW-interfaces other | 1 |
| With optical interface | No |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for PROFIBUS | Yes |
| Supporting protocol for CAN | Yes |
| Supporting protocol for INTERBUS | Yes |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | Yes |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | Yes |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | Yes |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| System accessory | Yes |
| Degree of protection (IP) | IP20 |
| Type of electric connection | Spring clamp connection |
| Time delay at signal change | 2 ms |
| Fieldbus connection over separate bus coupler possible | Yes |
| Suitable for rail mounting | No |
| Wall mounting/direct mounting | No |
| Front built-in possible | No |
| Rack-assembly possible | Yes |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| MOQ | 1 |