Graco Round Pattern Automatic Fusion Mechanical Purge Gun with 0.070 in (1.8 mm) Ceramic Tip and 0.057 in (1.45 mm) Impingement Port

Part Number
248387 · HS 8424.20

Graco 248387 Round Pattern Automatic Fusion Mechanical Purge Gun with 0.070 in (1.8 mm) Ceramic Tip and 0.057 in (1.45 mm) Impingement Port, part number 248387. Fusion MP Auto plural-component impingement-mix spray gun, 0.070 in (1.78 mm) fluid orifice, Round spray pattern. Maximum fluid pressure 3500 psi (241 bar). Maximum fluid temperature 200 °F. Compatible material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam. All values read from the Graco product page (248387 on graco.com).

Technical Specifications

Brand

Graco Model: Fusion MP Series: Auto Part number: 248387 Type: Spray Gun Compatible material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam

No-Heat Foam Spray pattern

Round Fluid orifice size: 0.070 in (1.78 mm) Maximum fluid pressure: 3500 psi (241 bar) Maximum air inlet pressure: 130 psi (9 bar) minimum air inlet pressure: 80 psi (5.5 bar) Maximum fluid temperature: 200 °F (93 °C) Maximum flow rate @ pressure: 50 lb/min Sound pressure level: 70 dB(A) Sound power level: 79.9 dB(A) Overall length: 7.6 in (193 mm) Overall height: 3.75 in (95 mm) Overall width: 3.1 in (79 mm)

Fusion is Graco's plural-component impingement-mix spray-gun line for the Reactor proportioner range. Auto series; 0.070 in fluid orifice; Round spray pattern. Confirm orifice size, mix chamber/module and spray pattern match the material and output before ordering.

Pressure rating	3500 psi (241 bar) max fluid
Temperature range	up to 200 °F (93 °C)
MOQ	1

Graco Round Pattern Automatic Fusion Mechanical Purge Gun with 0.070 in (1.8 mm) Ceramic Tip and 0.057 in (1.45 mm) Impingement Port

Technical Specifications

Properties

Compatibility

Attached Documents