Graco 233487 Triton 308 8.5 gpm aluminum bare pump package, wall mount, part number 233487. Pneumatic Diaphragm Pump, 1:1 pump ratio. Maximum working pressure 100 psi (7 bar); maximum fluid flow 8.5 gpm (32 lpm). Aluminum fluid section. Wall Mount. Bare package — no applicator supplied. All values read from the Graco product page (233487 on graco.com).
| Brand | Graco |
| Model | Triton |
| Series | 308 |
| Part number | 233487 |
| Product type | Bare Package |
| Material | Aluminum |
| Pump type | Pneumatic Diaphragm Pump |
| Pump ratio | 1:1 |
| Power source | Air |
| Maximum working pressure | 100 psi (7 bar) |
| Maximum flow rate | 8.5 gpm (32 lpm) |
| Maximum air inlet pressure | 100 psi (7 bar) |
| Pressure type | Low Pressure |
| Gun technology | Bare Package |
| Gun type | No Applicator |
| Sprayer type | Air Spray |
| Mount type | Wall Mount |
| Fluid inlet size | 3/4 in. (19.05 mm) |
| Fluid inlet thread type | NPT |
| Fluid outlet size | 3/8 in. (9.525 mm) |
| Fluid outlet thread type | NPT |
| Compatible material | CARC, Enamel, High Solids, Latex, Lacquer, Metallics, Solventborne Paints, Solventborne, Epoxy Coating, Single-Component |
| Weight | 18.96 lb (8.6 kg) |
| Material | Aluminum |
| Pressure rating | 100 psi (7 bar) max working |
| MOQ | 1 |
Triton is Graco's air-powered (pneumatic diaphragm) finishing pump line. The 1:1 pump ratio feeds fluid at supply-air pressure; the aluminum fluid section is matched to the coating being handled. This is a bare package; select and add the applicator, hoses and tip to suit the application. Confirm the compressed-air supply and mount suit the installation before ordering.