The Fluke U1500S 1,500V DC Voltage Sensor allows you to safely connect to DC bus bars at up to 1.5kV, connects to the instrument voltage input.The voltage can be scaled in the instrument to provide results in real units.
The Fluke U1500S 1,500V DC Voltage Sensor allows you to safely connect to DC bus bars at up to 1.5kV, connects to the instrument voltage input.The voltage can be scaled in the instrument to provide results in real units.
| Manufacturer part number (MPN) | 5132942 |
| Brand | Fluke |
| Category | Tools |
| Modules | U1500s |
| Maximum Voltage | 1000 V ac rms, continous, 1500 V dc (Single-range) |
| Dimensions | 138 mm x 75 mm x 45 mm |
| Weight | 295 g, battery included |
| Input teminal | 4 mm banana jacks |
| Output terminal | BNC (female) |
| Accessory Cable | BNC to Banana, 1.6 m |
| Ingress Protection | IEC 60529: IP40 (Terminals Mated) |
| Battery Type | 4 AA, IEC LR6 |
| Battery Life | 168 hours (typical) |
| Indicator | Low battery flashes red Working flashes green |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -30 °C to 60 °C |
| Operating Humidity | Non-condensing (<10 °C) ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C) |
| Operating Altitude | 2000 m |
| Storage Altitude | 12 000 m |
| Safety General | IEC 61010-1: Pollution Degree 2 |
| Safety Measurement | IEC 61010-2-030: CAT III 1000 V, CAT IV 600 V, DC 1500 V |
| Measurement Range | 1000 V ac rms, 1500 V dc |
| Accuracy | 0.1 % of reading +0.1 % of Range |
| Bandwidth | 100 kHz (Max) |
| Input Impedance | 2M Ω/ <10pF |
| Scale | 4 mV/V |
| Common Mode Rejection Ratio | 60 dB at 50 Hz |
| Temperature Coefficients | 0.05 % / °C (28 °C) |
| Over-range Protection | 10 % over range |
| MOQ | 1 |