The i310 current probe offered by Fluke can be used to measure both DC and AC current for accurate measurements. Contact us for more information.
The i310 current probe offered by Fluke can be used to measure both DC and AC current for accurate measurements. Contact us for more information.
| Manufacturer part number (MPN) | 2840309 |
| Brand | Fluke |
| Category | Tools |
| Current ranges | 30 A and 300 A AC rms or ±45 A and 450 A DC |
| Measuring ranges | ±45 A and 450 A DC |
| AC rms or DC | ±45 A and 450 A |
| Inrush current | 600A AC rms MAX |
| Output sensitivity | 10 mV/A (30 A) |
| Accuracy (at +23°C) (30 A range) | ±1% of reading ±50 mA |
| Accuracy (at +23°C) (300 A range) | ±1% of reading ±300 mA |
| Bandwidth to meet accuracy specification | 1 kHz |
| Phase shift below 1 kHz | < 2 degrees |
| Resolution | ±50 mA (30 A) |
| Load impedance | > 10 k Ohms and ≤100 pF |
| Conductor position sensitivity | ±1.5% relative to centre reading |
| Frequency range (small signal) | DC to 20 kHz (-3 dB) |
| Temperature coefficient | ±0.1% of reading / °C |
| Power supply | 9 V Alkaline, MN1604/PP3 |
| Battery life | 30 Hours, low battery indicator |
| Working voltage (see Safety Standards section) | 300 V AC rms or DC |
| Maximum conductor size | 19 mm diameter |
| Output connection | Safety BNC connector |
| Output zero | Manual adjust via thumbwheel |
| Cable length | 2 metres |
| Operating temperature range | -10 to +50°C |
| Storage temperature range (with battery removed) | -20 to +85°C |
| Operating humidity | 15% to 85% (non-condensing) |
| Weight | 250 g |
| Safety | IEC 61010-1, Pollution Degree 2 |
| EMC Compatibility | IEC 61326-1: Portable Electromagnetic Environment |
| MOQ | 1 |