The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.
The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.
| Manufacturer part number (MPN) | 2584935 |
| Brand | Fluke |
| Category | Tools |
| Specified current range | 30 mA to 30 A DC, 30 mA to 20 A AC rms |
| Usable current range | 5 mA to 30 A DC, 30 mA to 20 A AC rms |
| Crest factor | 1.4 in |
| Output sensitivity | 100 mV/A |
| Accuracy (at +25°C) | DC ±1 % of reading ±2 mA AC ± 0.5 dB of reading ±2 mA |
| Resolution | ±1 mA |
| Load impedance | > 100 kΩ |
| Conductor position sensitivity | ±1% relative to center reading |
| Frequency range | DC to 100 kHz (-0.5 dB) |
| Phase shift below 1 kHz | < 2° |
| Temperature coefficient | ±0.01% of reading / °C |
| Power supply | 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator |
| Working voltage (see Safety Standards section) | 300 V AC rms or DC |
| Maximum conductor size | 19 mm diameter |
| Output connection | Safety BNC connector, supplied with safety 4 mm adapter |
| Output zero | Manual adjust via thumbwheel |
| Cable length | 2 m |
| Operating temperature range | 0°C to +50°C |
| Storage temperature range (with battery removed) | -20°C to +85°C |
| Operating humidity | 15% to 85% (non-condensing) |
| Weight | 250 g |
| Safety | IEC 61010-1, Pollution Degree 2 |
| EMC Compatibility | IEC 61326-1: Portable Electromagnetic Environment |
| MOQ | 1 |