| Manufacturer part number (MPN) | 2584912 Brand: Fluke Category: Tools Current ranges: 20 A 200 A 2000 A AC rms Output sensitivity (AC-coupled): 1 mV 10 mV 100 mV 1 mV per A Load impedance: 100 kΩ minimum Accuracy: at +25°C ±1% of range (45 Hz to 65 Hz) Linearity: 10% to 100% of range ±0.2% of reading Noise: 8 mV AC rms (30 A) 2 mV AC rms (300 A, 3000 A) Frequency range: 10 Hz to 20 kHz (-3 dB) Phase error: < ±1° (45 Hz to 65 Hz) ±10° (at 20 kHz) Position sensitivity (with cable > 25 mm from the coupling): Position sensitivity: From 1% up to 3% of range with cable, depending on distance from the center (see figure left). Measurements closer than 25 mm from the coupling are typically greater than 3% of range |
| External wire influence | 1% (-40 db) of external current >200 mm from head |
| External field | with cable > 200 mm from the head ±1% of range Power supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator Temperature Coefficient: ±0.08% of reading per °C Working voltage: see Safety standards section 600 V AC rms or DC Head Circumference: 610 mm (24 in) Head cable diameter: 14.3 mm (0.56 in) Head bend radius: 38.1 mm (1.5 in) Cable length (head to electronics): 2 m (6.56 ft) Output connection: Molded 4 mm safety plugs (not integrated) Operating temperature range: 0°C to +70°C (32°F to 158°F) (head and electronics) Storage temperature range: -40°C to +105°C (-40°F to 221°F) (head) -20°C to +85°C (-4°F to 185°F) (electronics) Operating humidity: 15% to 85% (non-condensing) Weight: 180 g (6.34 oz) (head) 190 g (6.70 oz) (electronics) Safety standards: EN 61010-031: 2002 EN 61010-2-032: 2002 EN 61010-1: 2001 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz |
| EMC standards | EN 61326: 1998 +A1, A2, and A3 Dimensions (H x W x D): 116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in) |
