This kit helps electricians and HVAC technicians test for overheated electrical devices and use the clamp meter and voltage detector to find out more about the problem.
This kit helps electricians and HVAC technicians test for overheated electrical devices and use the clamp meter and voltage detector to find out more about the problem.
| Manufacturer part number (MPN) | 4296076 |
| Brand | Fluke |
| Category | Tools |
| Temperature range | -30°C to 650°C (-22°F to 1202°F) |
| Accuracy | ±1.0°C or ±1.0% of reading, whichever is greater -10°C to 0°C: ±2.0 -30°C to -10°C: ±3.0 |
| Response time (95%) | < 300 ms (95% of reading) |
| Spectral response | 8 to 14 microns |
| Emissivity | 0.10 to 1.00 |
| Optical resolution | 12:1 (calculated at 90% energy) |
| Display resolution | 0.1°C (0.2°F) |
| Repeatability of readings | ±0.5% of reading or < ±0.5°C (1°F), whichever is greater |
| Power | AA battery |
| Battery life | 8 hours with laser and backlight on |
| Weight | 255 g (8.99 oz) |
| Size | 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in) |
| Operating temperature | 0°C to 50°C (32°F to 122°F) |
| Storage temperature | -20°C to 60°C (-4°F to 140°F), (without battery) |
| Operating humidity | 10% to 90% RH non-condensing at 30°C (86°F) |
| Operating altitude | 2000 meters above mean sea level |
| Storage altitude | 12,000 meters above mean sea level |
| IP rating | IP 54 per IEC 60529 |
| Drop test | 3 meters |
| Vibration and shock | IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms |
| EMC | EN 61326-1:2006 EN 61326-2:2006 |
| Standards and agency approval Compliance | EN/IEC 61010-1: 2001 |
| Standards and agency approval Laser safety | FDA and EN 60825-1 Class II |
| AC current Range | 400.0 A |
| AC current Accuracy | 2% ±5 digits (45 Hz to 65 Hz) 2.5% ±5 digits (65 Hz to 400 Hz) |
| AC voltage Range | 600.0 V |
| AC voltage Accuracy | 1.5% ±5 digits |
| DC voltage Range | 600.0 V |
| DC voltage Accuracy | 1.0% ±5 digits |
| Resistance Range | 400.0 Ω/ 4000 Ω |
| Resistance Accuracy | 1.0% ±5 digits |
| Continuity | ≤ 70 Ω |
| AC response | True-rms |
| Data hold | Yes |
| Size H x W x D (mm) | 207 x 75 x 34 |
| Size Max wire diameter | 30 mm (600 MCM) |
| Size Weight | 265 g |
| Category rating | CAT III 600 V CAT IV 300 V |
| Warranty | Two-year |
| Operating principle | Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage sensing ranges | Nominally, 90 VAC to 1000 VAC or 200 VAC to 1000 VAC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model |
| Detector tip style | Blade or round, depending on model |
| Light source | One high intensity red LED |
| Agency approvals | c CSA us, CE, C-Tick |
| Safety rating | 1000 V, CAT IV |
| Operating humidity ranges 0% to 95% | (0°C to 30°C) |
| Operating humidity ranges 0% to 75% | (30°C to 40°C) |
| Operating humidity ranges 0% to 45% | (40°C to 55°C) |
| Batteries | 2 AAA alkaline batteries included |
| MOQ | 1 |