The Fluke 113 is an easy-to-use basic multimeter with VCHEK™ LoZlow impedance measurement function for ghost voltage detection which can measure and display both AC and DC voltages.
The Fluke 113 is an easy-to-use basic multimeter with VCHEK™ LoZlow impedance measurement function for ghost voltage detection which can measure and display both AC and DC voltages.
| Manufacturer part number (MPN) | 3078875 |
| Brand | Fluke |
| Category | Tools |
| VCHEK1 2 3 Range | 6.000 V / 60.00 V / 600.0 V |
| VCHEK1 2 3 Resolution | 0.001 V / 0.01 V/ 0.1 V |
| VCHEK1 2 3 Accuracy | DC, 45 to 500 Hz: 2.0% + 3 500 Hz to 1 kHz: 4.0% + 3 |
| Diode test4 Range | 2.000 V |
| Diode test4 Resolution | 0.001 V |
| Diode test4 Accuracy | 2.0% + 3 |
| Continuity4 Accuracy | Beeper on 250 Ω detects opens or shorts of 500 μs or longer |
| Ω4 Range | 600.0 Ω / 6.000 kΩ / 60.00 kΩ |
| Ω4 Resolution | 0.1 Ω / 0.001 kΩ / 0.01 kΩ |
| Ω4 Accuracy | 0.9% + 2 / 0.9% + 1 / 0.9% + 1 |
| Capacitance4 Range | 1000 nF / 10.00 μF / 100.0 μF / 9999 μF |
| Capacitance4 Resolution | 1 nF / 0.01 μF / 0.1 μF / 1 μF |
| Capacitance4 Accuracy | 1.9% + 2 100 μF - 1000 μF: 1.9% + 2 1000 μF: 5% + 20 |
| Maximum voltage between any terminal and earth ground | 600 V |
| Display | 3 3/4-digits, 6000 counts, updates 4/sec |
| Operating temperature | -10°C to 50°C (14°F to 122°F) |
| Storage temperature | -40°C to 60°C (-22°F to 140°F) |
| Temperature coefficient | 0.1 x (specified accuracy) / °C ( 28°C) |
| Operating altitude | 2,000 m |
| Storage altitude | 10,000 m |
| Relative humidity | 95% to 30°C 75% to 40°C 45% to 50°C |
| Battery type | 9 Volt Alkaline, IEC 6F22 |
| Battery life | Alkaline: 300 hours typical, without backlight |
| Size (H x W x L) | 167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in) |
| Weight | 13.0 oz (404 g) |
| Safety | IEC 61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600V |
| EMI regulations | Complies with FCC Part 15, Class B |
| VCHEK Input impedance (nominal) | ~3 kΩ < 300 pF |
| VCHEK Common mode rejection ratio (1 kΩ unbalanced) | > 60 dB at DC, 50 or 60 Hz |
| Ω Open circuit test voltage | < 2.7 VDC |
| Ω Full scale voltage | < 0.7 VDC |
| Diode test Open circuit test voltage | 2.7 VDC |
| Diode test Full scale voltage | 2.000 VDC |
| Ω Short circuit current | < 350 μA |
| Diode test Short circuit current | < 1.0 mA |
| MOQ | 1 |