9500B oscilloscope calibrator from Fluke Calibration is fully automated, accurate & can deliver 6.0 GHz leveled its waves & pulse edges of only 70 ps.
9500B oscilloscope calibrator from Fluke Calibration is fully automated, accurate & can deliver 6.0 GHz leveled its waves & pulse edges of only 70 ps.
| Manufacturer part number (MPN) | 1623977 |
| Brand | Fluke |
| Category | Tools |
| Amplitude | ± 1 mV to ± 200V into 1M Ω ± 1 mV to ± 5V into 50 Ω |
| Accuracy | ± (0.025% + 25 µV) |
| Ranging | 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous |
| Deviation | ± 11.2% |
| Rise/Fall Time | =100V <200 ns |
| Aberrations | <2% peak for first 500 ns |
| Frequency | Range: 10 Hz to 100 kHz Accuracy: ± 0.25 ppm Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous |
| Mk/Sp Ratio | 1:9 |
| Styles | Square/Its, Pulse or Narrow Triangle |
| Square/Its | Period Square: 10 ns to 55s Period Its: 450 ps to 10ns 9500/600 = 1ns to 10ns 9560 = 180ps to 10ns |
| Pulse | Period: 1 µs to 55s Rise/Fall Time: 2.5% of period |
| Timing Accuracy | Normal: ± 0.25 ppm |
| Timing Jitter | 10 ps pk-pk |
| Sub-Division | Every 10th marker can be set to higher amplitude for periods ± 1 µs for all waveshapes |
| Amplitude (Leveled Its into 50Ù) | 0.1 Hz - 550 MHz 4.44 mV to 5.560V pk-pk 550 MHz - 2.5 GHz 4.44 mV to 3.336V pk-pk 2.5 GHz - 3.2 GHz 4.44 mV to 2.224V pk-pk 3.2 GHz - 6.4 GHz 25mV to 2 V pk-pk Accuracy: ± 1.5% at 50 kHz |
| Flatness (Leveled Its relative to 50kHz) | 0.1 Hz - 300 MHz ± 2% 300 MHz - 550 MHz ± 3% 550 MHz - 1.1 GHz ± 4% 1.1 GHz - 3.2 GHz ± 5% 3 GHz - 6.0 GHz ± 5% |
| Its Purity | 2nd Harmonic <-35 dBc 3rd Harmonic <-40 dBc All Other Spurious Signals <-40 dBc (typical) |
| Resistance Measurement (not available on 9550) | Range: 10Ω - 150Ω and 50 kΩ - 12 MΩ Accuracy: 10 - 40 (W) ± 0.5% 40 - 90 ± 0.1% 90 - 150 ± 0.5% 50k - 800k ± 0.5% 800k - 1.2M ± 0.1% 1.2M - 12M ± 0.5% |
| Pattern | White, gray or black |
| Sync Polarity | Positive or negative |
| Standards | 625-line 50 Hz or 525-line 60 Hz |
| Waveforms | 1V pk-pk sym. triangle |
| Ramp Time | 1 ms to 1s |
| Polarity | Positive or negative |
| Duration | 0.2s to 100s |
| Trigger | Manual |
| Unadjusted Skew | ± 25 ps ch to ch |
| Adjusted Skew | ± 5 ps ch to ch |
| Frequency Range | 10 Hz to 100 MHz |
| Output Leakage | Open Circuit: ± 50 pA Short Circuit: ± 15 µV |
| Signal Routing | Rear i/p to any Active Head |
| Maximum Input | Voltage: ± 40V pk-pk Current: ± 400 mA pk-pk |
| Rate | User Selectable: f (up to 120 MHz), f/10 or f/100 Free Run: 100 Hz |
| Reference Frequency Input | Frequency Range: 1 MHz to 20 MHz in 1 MHz steps Level: 90 mV to 1V pk-pk typ |
| Lock Range | ± 50 ppm |
| Reference Frequency Output | Frequency: 1 MHz or 10 MHz Level: Into 50W: 1V pk-pk (typical) |
| Temperature | Operating: 5°C to 40°C Storage: 0°C to 50°C |
| Humidity (non-condensing) | Operating: <90% over 5°C to 30°C <75% over 30°C to 40°C Storage: <95% over 0°C to 50°C |
| Power, battery life | Voltage: 95V to 132V rms or 209V to 264V rms Frequency: 48 Hz to 63 Hz Consumption: 400 VA |
| Warm up Time | 20 minutes |
| Calibration Documentation | 17025 accredited report of calibration included |
| Dimensions | Model 9500B Mainframe: H x W x D 133 x 427 x 440 mm (5.24 x 16.8 x 17.3 ins) Weight 12 kg (27 lbs) approx. Modules 9510, 9530, 9550: H x W x D 65 x 31 x 140 mm (2.56 x 1.22 x 5.51 ins) Weight: 0.45 kg (1-lb) approx. |
| Safety | Designed to UL3111 and EN61010-1-1:1993/A2:1995. CE Marked EMC (including options) Emissions: EN55011/22 Immunity: EN50082-1:1992 FCC Rules part 15 sub-part J class B |
| Warranty Period | Mainframe: 1-year Active Heads: 3-years |
| MOQ | 1 |