| Manufacturer part number (MPN) | XNE-GWBR-2ETH-IP |
| EAN / GTIN | 7640130095281 |
| Sales unit | pcs |
| Eaton catalogue number | 140047 |
| Depth | 129 mm |
| Height | 75 mm |
| Width | 33.5 mm |
| Weight | 0.136 kg |
| Certifications | IEC/EN 61131-2; IEC/EN 61000-6-2; cULus; IEC/EN 61000-6-4; Rated data for terminations according to IEC/EN 60947-7-1; CE |
| Drop and topple | According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Shock resistance | Mechanical, According to IEC/EN 60068-2-27; Continuous according to IEC/EN 60068-2-29 |
| Vibration resistance | According to IEC/EN 60068-2-6 |
| Ambient operating temperature - max | 55 °C |
| Ambient storage temperature - max | 85 °C |
| Ambient operating temperature - min | 0 °C |
| Ambient storage temperature - min | -25 °C |
| Environmental conditions | Harmful gasses - SO2: 10 ppm (relative humidity < 75%, no condensation); Harmful gasses - H2S: 1 ppm (relative humidity < 75%, no condensation) |
| Relative humidity | 5 - 95 % (indoor, Level RH-2, non-condensing for storage at 45°C) |
| Addressing | Address set via decimal rotary coding switch, BootP, DHCP or I/Oassistant; Address set via DIP switch, BootP |
| DHCP or PGM; Address range | 1 - 254 decimal |
| Connection type | Push-In spring-cage terminals, Connection design in TOP direction; Screw terminals, Field bus/Supply voltage); 2 x RJ45 (Ethernet Switch), Field bus |
| Data transfer rate | 100 MBit/s, Networking; Setting automatically; 10/100 MBit/s; 10 MBit/s, Networking |
| Field voltage | 24 V DC (UL) |
| Interfaces | Mini-USB (Service interface); Ethernet (Ethernet-IP protocol), Field bus connection |
| Protocol | EtherNet/IP; Ethernet; Other bus systems; TCP/IP |
| Static heat dissipation, non-current-dependent Pvs | 8 W |
| Supply voltage | 4.7 - 5.3 V DC |
| Supply voltage at AC |
| Supply voltage at AC |
| Supply voltage at DC - max | 30 V |
| Supply voltage at DC - min | 18 V |
| Air discharge | According to EN 61100-4-2 |
| Burst impulse | According to IEC/EN 61000-4-4 |
| Contact discharge | According to EN 61100-4-2 |
| Electromagnetic fields | According to IEC EN 61100-4-2 |
| Emitted interference | 230 - 1000 MHz (radiated, high frequency, according to EN 55016-2-3); 30 - 230 MHz (radiated, high frequency, according to EN 55016-2-3) |
| Radiated RFI | IEC/EN 61100-4-6 |
| Surge rating | According to IEC/EN 61000-4-5 Level 4 |
| Voltage dips | According to EN 61131-2 (Voltage fluctuations/voltage dips) |
| Features | Fieldbus connection over separate bus coupler possible |
| Fitted with | Bus refreshing module; Potential separation |
| Accessories | 1 x end plate XN-ABPL and 2 x end bracket XN-WEW-32/2-SW included with supplied equipment. |
| Admissible range | 18 - 30 V DC, Networking |
| Configuration | Maximum station configuration: 74 cards (XN |
| XNE) of slice design or max. length of station | 1 m |
| Degree of protection | IP20 |
| Mounting method | Rail mounting possible |
| Residual ripple | According to EN 61131-2 |
| Type | XI/ON ECO gateways XNE-Gateway with integrated supply |
| Voltage type | DC |
| Explosion safety category for dust | None |
| Explosion safety category for gas | None |
| Potential isolation | Through optocoupler: yes |
| Gauge pin | A1 (according to IEC/EN 60947-1) |
| Stripping length (main cable) | 8 mm |
| Terminal capacity | 0.25 - 0.75 mm², with ferrules with plastic collar; 0.25 - 1.5 mm², solid; 0.25 - 1.5 mm², flexible without ferrule; 0.25 - 1.5 mm², with ferrules without plastic collar |
| Certified for UL hazardous location division 1 | No |
| Certified for UL hazardous location division 2 | No |
| Certified for UL hazardous location group A (acetylene) | No |
| Certified for UL hazardous location group B (hydrogen) | No |
| Certified for UL hazardous location group C (ethylene) | No |
| Certified for UL hazardous location group D (propane) | No |
| Certified for UL hazardous location group E (metal dusts) | No |
| Certified for UL hazardous location class I | No |
| Certified for UL hazardous location class II | No |
| Certified for UL hazardous location class III | No |
| Supporting protocol for EtherCAT | No |
| Supply voltage DC | 18–30 V |
| Supporting protocol for TCP/IP | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | Yes |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard eGPRS | No |
| Radio standard GSM | No |
| Radio standard LTE | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| System accessory | Yes |
| With potential separation | No |
| Fieldbus connection over separate bus coupler possible | Yes |
| Suitable for rail mounting | Yes |
| Wall mounting/direct mounting | No |
| Front built-in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Country of origin | Germany |
