Eaton XNE-4AO-U/I Analog Output Module XI/ON ECO, 24 V DC, 4A(voltage, current).
Eaton XNE-4AO-U/I Analog Output Module XI/ON ECO, 24 V DC, 4A(voltage, current).
| Manufacturer part number (MPN) | XNE-4AO-U/I |
| EAN / GTIN | 7640130095304 |
| Sales unit | pcs |
| Eaton catalogue number | 140034 |
| Depth | 161.5 mm |
| Height | 74.5 mm |
| Width | 13 mm |
| Weight | 0.064 kg |
| Certifications | cULus; IEC/EN 61131-2; CE; IEC/EN 61000-6-4; Rated data for terminations according to IEC/EN 60947-7-1; IEC/EN 6113-2; IEC/EN 61000-6-2 |
| Drop and topple | According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Shock resistance | Continuous according to IEC/EN 60068-2-29; Mechanical, According to IEC/EN 60068-2-27 |
| Vibration resistance | According to IEC/EN 60068-2-6 |
| Ambient operating temperature - max | 55 °C |
| Ambient storage temperature - max | 85 °C |
| Ambient operating temperature - min | 0 °C |
| Ambient storage temperature - min | -25 °C |
| Environmental conditions | Harmful gasses - SO2: 10 ppm (relative humidity < 75%, no condensation); Harmful gasses - H2S: 1 ppm (relative humidity < 75%, no condensation) |
| Relative humidity | 5 - 95 % (indoor, Level RH-2, non-condensing for storage at 45°C) |
| Connection type | Push-In spring-cage terminals, Connection design in TOP direction |
| Protocol | Other bus systems |
| Equipment heat dissipation, current-dependent Pvid | 3 W |
| Heat dissipation capacity Pdiss | 0 W |
| Heat dissipation per pole, current-dependent Pvid | 0 W |
| Rated operational current for specified heat dissipation (In) | 0 A |
| Static heat dissipation, non-current-dependent Pvs | 3 W |
| Power loss | 3 W |
| Rated operational voltage | 24 V DC (supply terminal) |
| Supply voltage at AC, 50 Hz - min | 0 VAC |
| Supply voltage at DC - max | 28.8 VDC |
| Supply voltage at DC - min | 20.4 VDC |
| Short-circuit current | 40 mA, Analog output modules |
| Air discharge | According to EN 61100-4-2 |
| Burst impulse | According to IEC/EN 61000-4-4 |
| Contact discharge | According to EN 61100-4-2 |
| Electromagnetic fields | According to IEC EN 61100-4-2 |
| Emitted interference | 230 - 1000 MHz (radiated, high frequency, according to EN 55016-2-3); 30 - 230 MHz (radiated, high frequency, according to EN 55016-2-3) |
| Radiated RFI | IEC/EN 61100-4-6 |
| Surge rating | According to IEC/EN 61000-4-5 Level 4 |
| Voltage dips | According to EN 61131-2 (Voltage fluctuations/voltage dips) |
| Electric connection type | Plug-in connection |
| Features | Analog outputs configurable; Output, current; Fieldbus connection over separate bus coupler possible; Output, voltage; Output signal configurable |
| Current consumption | 40 mA, from module bus, Analog input modules; 150 mA, from supply terminal |
| Degree of protection | IP20; NEMA 1 |
| Mounting method | Rail mounting possible |
| Product category | XNE Slice module |
| Type | XI/ON I/O module |
| Voltage type | DC |
| Number of channels | 4 |
| Frequency | 20 Hz (Transfer) |
| Load resistance | < 450 Ω (Current); > 1 µF (capacitive load); < 0.001 h (inductive load); > 1000 Ω (Voltage) |
| Measured value representation | Standard/extended range/PA (NE43); 16-bit signed integer; 12-bit full range, flush left |
| Measured variables | Current; Voltage |
| Number of inputs (analog) | 0 |
| Number of outputs (analog) | 4 |
| Output | 4 Analog Outputs |
| Output current | 0/4 - 20 mA |
| Output voltage | -10 - 10 V DC |
| Settling time | 2 ms, Inductive load, Analog output modules; 1 ms, Resistive load, Analog output modules; 2 ms, Capacitive load, Analog output modules |
| Timing cycle | 0.1 % Offset error |
| Explosion safety category for dust | None |
| Explosion safety category for gas | None |
| Potential isolation | Through optocoupler: yes |
| Gauge pin | A1 (according to IEC/EN 60947-1) |
| Stripping length (main cable) | 8 mm |
| Terminal capacity | 0.25 - 1.5 mm², with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight); 0.25 - 1.5 mm², flexible without ferrule, H07V-K; 0.25 - 1.5 mm², solid, H07V-U; 0.25 - 0.75 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
| MOQ | 1 |