| Manufacturer part number (MPN) | EASY-E4-DC-12TCX1 |
| EAN / GTIN | 4015081939459 |
| Sales unit | pcs |
| Eaton catalogue number | 197214 |
| Depth | 58 mm |
| Height | 90 mm |
| Width | 72 mm |
| Weight | 0.2 kg |
| Compliances | Eaton supports the product until its end of life |
| Catalog Notes | Accuracy of the real-time clock depending on ambient air temperature - fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible |
| Drop and topple | 50 mm Drop height, Drop to IEC/EN 60068-2-31 |
| Height of fall (IEC/EN 60068-2-32) - max | 0.3 m |
| Mounting position | Horizontal; Vertical |
| Shock resistance | 15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts |
| Vibration resistance | 57 - 150 Hz, 2 g constant acceleration; 10 - 57 Hz, 0.15 mm constant amplitude; According to IEC/EN 60068-2-6 |
| Cable length | ≤ 30 m, screened, Analog inputs; 100 m, unscreened, Digital inputs 24 V DC |
| Cable type | Ethernet: CAT5 |
| Air pressure | 795 - 1080 hPa (operation) |
| Ambient operating temperature - max | 55 °C |
| Ambient storage temperature - max | 70 °C |
| Ambient operating temperature - min | -25 °C |
| Ambient storage temperature - min | -40 °C |
| Environmental conditions | Clearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201 |
| CSA-C22.2 NO. 61010-2-201; Condensation | prevent with appropriate measures |
| Relative humidity | 5 - 95 % (IEC 60068-2-30, IEC 60068-2-78) |
| Connection type | Ethernet: RJ45 plug, 8-pole; Screw terminal |
| Data transfer rate | 10/100 MBit/s |
| LED indicator | Status indication of Power/RUN; Status indication of Ethernet: LED |
| Static heat dissipation, non-current-dependent Pvs | 2 W |
| Conventional thermal current Ith of auxiliary contacts (1-pole, open) | 0.5 A |
| Heat dissipation | 3.4 W (at 24 V DC) |
| Inrush current | 12.5 A (for 6 ms) |
| Power consumption | 2 W |
| Power loss | 2 W |
| Rated operational current (Ie) | Max. 0.5 A at signal „1” DC per channel |
| Rated operational voltage | 24 V DC (transistor outputs); 20.4 - 28.8 V DC; 24 V DC (digital inputs); 24 V DC (-15 %/+ 20 % - power supply); 20.4 - 28.8 V DC (Transistor outputs) |
| Supply current | 24/44 mA, Normally⁄max., On 1 signal, Transistor outputs; 18/32 mA, Normally⁄max., On 0 signal, Transistor outputs |
| Supply voltage at DC - max | 28.8 VDC |
| Supply voltage at DC - min | 20.4 VDC |
| Air discharge | 8 kV |
| Burst impulse | 2 kV, Signal cable; 2 kV, Supply cable; According to IEC/EN 61000-4-4 |
| Contact discharge | 6 kV |
| Electromagnetic fields | 10 V/m at 0.8 - 1.0 GHz (according to IEC EN 61000-4-3); 1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3); 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3) |
| Immunity to line-conducted interference | 10 V (according to IEC/EN 61000-4-6) |
| Radio interference class | Class B (EN 61000-6-3) |
| Surge rating | 0.5 kV, Supply cables, symmetrical, power pulses (Surge), EMC; 1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC; According to IEC/EN 61000-4-5, power pulses (Surge), EMC |
| Voltage dips | 20 ms; ≤ 10 ms, Bridging voltage dips |
| Features | Expandable; Parallel connection of transistor outputs with resistive load, inductive load with external suppressor circuit, combination within a group - Group 1: Q1 to Q4; Networkable (Ethernet) |
| Fitted with | Timer; Real time clock |
| Functions | Thermal cutout |
| Degree of protection | IP20 |
| Frequency counter | Cable length: ≤ 20 m (screened |
| Digital inputs 24 V DC); Number | 4 (I1, I2, I3 |
| I4 - Digital inputs 24 V DC); Pulse shape | Square (digital inputs 24 V DC); Pulse pause ratio: 1:1 (Digital inputs 24 V DC); Counter frequency: 5 kHz (Digital inputs 24 V DC) |
| Insulation resistance | According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Mounting method | Top-hat rail fixing (according to IEC/EN 60715, 35 mm); Screw fixing using fixing brackets ZB4-101-GF1 (accessories); Rail mounting possible; Front build in possible; Wall mounting/direct mounting |
| Operating frequency | Dependent on the cycle- and transmission-time of the expansion devices; Dependent on the cycle time of the basic device; Depending on the suppressor circuit (Inductive load to EN 60947-5-1, with external suppressor circuit, Max. switching frequency, max. duty factor) |
| Overvoltage category | III |
| Pollution degree | 2 |
| Product category | Control relays easyE4 |
| Protocol | MODBUS; TCP/IP |
| Residual current | 0.1 mA (on signal "1" per channel) |
| Residual ripple | 5 % (transistor outputs); ≤ 5 % |
| Resolution | 1 min (Range H:M) 1 s (Range M:S) 12 Bit (value 0 - 4095, Analog inputs) 5 ms (Range S) |
| Software | EASYSOFT-SWLIC/easySoft |
| Type | easyE4 base device |
| Used with | easyE4 |
| Voltage type | DC |
| Accuracy | ± 2 %, (I5, I6, I7, I8) ± 0.12 V, of actual value, within a single device (Analog Inputs); ± 1 %, Repetition accuracy of timing relays (of values); ± 3 %, of actual value, two easy devices (Analog Inputs); ± 2 s/day, Real-time clock to inputs (± 0.2 h⁄Year) |
| Conversions | Each CPU cycle for Analog inputs |
| Incremental counter | Pulse pause ratio: 1:1; Number of counter inputs: 2 (I1 + I2 |
| I3 + I4); Pulse shape | Square; Signal offset: 90°; Value range: -2147483648 to +2147483647; Counter frequency: ≤ 5 kHz |
| Incremental encoder | Cable length: ≤ 20 m (screened) |
| Input | Voltage (DC) |
| Input current | 1 mA (Analog inputs); 2.2 mA (I5 - I8, at 24 V DC, at signal 1); 3.3 mA (I1 - I4, at 24 V DC, at signal 1); 80 mA |
| Input impedance | 13.3 kΩ |
| Input voltage | Status 0: ≤ 8 V DC (I5 - I8, Digital inputs |
| 24 V DC); Status 0 | ≤ 15 V DC (I1 - I4, Digital inputs |
| 24 V DC); Status 1 | ≥ 15 V DC (I1 - I4, Digital inputs |
| 24 V DC); Signal 0 | ≤ 5 V DC (I1 - I8, Digital inputs, 24 V DC) |
| Lamp load | Max. 3 W (without Rv per channel) |
| Number of inputs (analog) | 0; 4 |
| Number of inputs (digital) | 8 |
| Number of outputs (analog) | 0 |
| Number of outputs (digital) | 4 |
| Output | 2 A, Max. total current, Outputs; Parallel connection of max. 4 Transistor outputs; 4 Transistor Outputs; Voltage; Current |
| Output voltage | U = Uₑ - 1 V (signal 1 at Iₑ = 0.5 A, transistor outputs); Max. 2.5 V (at status 0 per channel, transistor outputs) |
| Rapid counter inputs | Pulse shape: Square; Value range: -2147483648 to +2147483647; Pulse pause ratio: 1:1; Counter frequency: ≤ 10 kHz; Number of rapid counter inputs: 4 (I1, I2, I3 |
| I4); Cable length | ≤ 20 m (shielded) |
| Signal range | 0 - 10 V DC, Analog inputs |
| Explosion safety category for dust | None |
| Explosion safety category for gas | None |
| Protection against polarity reversal | For transistor outputs (Caution: A short circuit will result if 0 V/earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles); Yes, for supply voltage (Siemens MPI optional) |
| Short-circuit current | 6.8 A, Transistor outputs |
| Short-circuit protection | ≥ 1A (T), Fuse, Power supply; Yes, electronic (Q1 - Q4), Transistor outputs |
| Short-circuit tripping current | 0.7 ≤ Ie ≤ 1.7 per output, For Ra ≤ 10 mΩ, Depending on number of active channels and their load, Transistor outputs |
| Screwdriver size | 3.5 x 0.8 mm, Terminal screw |
| Terminal capacity | 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule; 0.2 - 4 mm² (AWG 22 - 12), solid |
| Tightening torque | 0.6 Nm, Screw terminals |
| Certified for UL hazardous location division 1 | No |
| Certified for UL hazardous location division 2 | Yes |
| Certified for UL hazardous location group A (acetylene) | Yes |
| Certified for UL hazardous location group B (hydrogen) | Yes |
| Certified for UL hazardous location group C (ethylene) | Yes |
| Certified for UL hazardous location group D (propane) | Yes |
| Certified for UL hazardous location group E (metal dusts) | No |
| Certified for UL hazardous location class I | Yes |
| Certified for UL hazardous location class II | No |
| Certified for UL hazardous location class III | No |
| Supporting protocol for EtherCAT | No |
| Supply voltage DC | 20.4–28.8 V |
| Switching current | 0.5 A |
| Number of digital inputs | 8 |
| Number of digital outputs | 4 |
| With relay output | No |
| Number of HW-interfaces industrial Ethernet | 1 |
| With optical interface | No |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | Yes |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| Redundancy | No |
| With display | No |
| Basic device | Yes |
| Expandable | Yes |
| Expansion device | No |
| With time switch clock | Yes |
| Suitable for rail mounting | Yes |
| Wall mounting/direct mounting | Yes |
| Front built-in possible | Yes |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Country of origin | Estonia |
