cBallast
Industrial Parts Catalog
Datasheet generated 2026-10-07
sales@cballast.com
cballast.com

Eaton N3-4-500-S1-DC

Eaton · Switchgear & Protection · Disconnect Switches · Ireland · eaton.com
Part Number
N3-4-500-S1-DC  ·  HS 8536.20
Eaton N3-4-500-S1-DC

Technical Specifications

Manufacturer part number (MPN)N3-4-500-S1-DC
EAN / GTIN4015081389988
Sales unitpcs
Eaton catalogue number142268
Depth166 mm
Height275 mm
Width185 mm
Weight7.3 kg
CompliancesRoHS conform
CertificationsIEC
FunctionsVoltage release optional; Interlockable; Photovoltaic applications; Disconnectors/main switches
Amperage Rating500 A
ApplicationOpen areas Utility buildings
Circuit breaker frame typeN3
FeaturesVersion as maintenance-/service switch; Motor drive optional; Version as emergency stop installation; Remote operation with shunt releases / remote operator; Version as main switch
Number of polesFour-pole
TypeDC switch-disconnector
Ambient operating temperature - max70 °C
Ambient storage temperature - max70 °C
Ambient operating temperature - min-25 °C
Equipment heat dissipation, current-dependent150 W
Rated operational current for specified heat dissipation (In)500 A
Current rating (Iu) at 40°C with terminal jumpers500 A
Current rating (Iu) at 65°C with terminal jumpers500 A
Electrical connection type of main circuitScrew connection
Handle typeRocker lever
Number of operations per hour - max60
Overvoltage categoryIII
Pollution degree3
Rated conditional short-circuit current with back-up fuse15 kA at 1000 V; 2 x 250 AgR
Rated insulation voltage (Ui)1250 V
Rated operational current500 A (DC 22-A)
Rated short-time withstand current (Icw)6.6 kA
Rated short-time withstand current (t = 1 s)6.6 kA
Short-circuit protective device fuses - max2 x 250 A gR
Utilization categoryDC-22 A
Voltage rating1000 V - 1000 V
Degree of protectionOther
Degree of protection (IP), front sideIP20
Handle colorBlack
Lifespan, mechanical15000 operations
Mounting MethodFixed; Built-in device fixed built-in technique; Distribution board installation; Ground mounting; Intermediate mounting
Number of auxiliary contacts (change-over contacts)0
Number of auxiliary contacts (normally closed contacts)0
Number of auxiliary contacts (normally open contacts)0
Number of switches1
Switch positionsI, +, 0
Standard terminalsScrew terminal
Terminal capacity (aluminum solid conductor/cable)16 mm² (1x) at tunnel terminal
Terminal capacity (aluminum stranded conductor/cable)25 mm² - 185 mm² (1x) at tunnel terminal
Terminal capacity (copper busbar)Max. 30 mm x 10 mm + 30 mm x 5 mm direct at switch rear-side connection; M10 at rear-side screw connection; Max. 10 mm x 50 mm (2x) at rear-side width extension; Min. 20 mm x 5 mm direct at switch rear-side connection
Terminal capacity (copper solid conductor/cable)16 mm² (2x) direct at switch rear-side connection; 16 mm² (2x) at box terminal; 16 mm² (1x) direct at switch rear-side connection
Country of originRomania

Properties

MOQ1

Cross-References

Attached Documents