| Manufacturer part number (MPN) | V-M20 |
| EAN / GTIN | 4015082069100 |
| Sales unit | pcs |
| Package quantity | 20 pcs |
| Eaton catalogue number | 206910 |
| Depth | 140 mm |
| Height | 85 mm |
| Width | 81 mm |
| Weight | 15 g |
| Compliances | RoHS conform |
| Certifications | IEC/EN 60947; VDE 0660 |
| Catalog Notes | OBSOLETE SEE SUPERSEDURE |
| Used with | Cable glands; H05VV-F 2.5 mm² (4x) or 4 mm² (3x); NYM 1.5 mm² (5x) or 2.5 mm² (5x); General switchboard accessory; Accessory |
| Pollution degree | 3 |
| NEMA Rating | UL/CSA Type 3R, 4X, 12, 13; 1 |
| Surface finishing | RAL 7035, light gray |
| Special features | Flammability classification V2 according to UL94 with lock nut and built-in strain relief with lock nut and built-in strain relief |
| Type | Accessory General switchboard accessory |
| Climatic proofing | Damp heat, cyclic, to IEC 60068-2-30; Damp heat, constant, to IEC 60068-2-78 |
| Connection to SmartWire-DT | No connection to SmartWire-DT |
| Chemical resistance | Resistant against: acetone, petrol, paraffin, diesel, grease, oil, solvent for paints and varnishes |
| Material | Plastic; Polyamide; Halogen free |
| Color | Gray |
| Mounting position | As required |
| Nominal thread size Metric/PG | 20 |
| Nominal thread size inch/gas pipe thread | Other |
| Pitch thread | 1.5 mm |
| Thread Length | 10 mm |
| Wrench width | 30 mm |
| Suitable for cable diameter - max | 13 mm |
| Suitable for cable diameter - min | 6 mm |
| Material quality | Polyamide (PA) |
| Surface protection | Untreated |
| Degree of protection (IP) | IP68 |
| Model | Straight |
| Type of sealing | Cut-out ring |
| For ex-zone gas | None |
| For ex-zone dust | None |
| Overvoltage category | III |
| Temperature resistance | -20 °C - 100 °C, short-time up to approx. 120 °C |
| Fitted with | Strain Relief; Locknut |
| Flammability characteristics (UL) | V2 (UL94) |
| Lamp type included | Halogen Free |
| Flame retardant | Glow wire test 750 °C according to EN 60695-2-11 |
| Thread type | Metric |
| Protection, proofing and resistance | Shock Resistant |
| Accessory/spare part type | Cable management; Cable screw gland |
| Stress fracture risk | Low |
| Unit type | Single unit |
| Ambient operating temperature - max | 70 °C |
| Ambient operating temperature - min | -25 °C |
| Opening diameter | 20.5 mm |
| Operating temperature - max | 120 °C |
| Operating temperature - min | -20 °C |
| Outer cable diameter - max | 13 mm |
| Outer cable diameter - min | 6 mm |
| RAL-number | 7035 |
| Rated insulation voltage (Ui) | 500 V |
| Cable entry type | M20 |
| For wall thickness - min | 0.5 mm |
| For wall thickness - max | 2.5 mm |
| Connection type to housing | Screwing |
| Type of strain relief according to EN 62444 | Type A |
| Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
| For wall thickness | 0.5–2.5 mm |
| Pressure-compensating | No |
| Suitable for cable diameter | 6–13 mm |
| Halogen free | Yes |
| Glass-fibre reinforced | No |
| Shock resistant | Yes |
| Bend radius protection/trumpet flare | No |
| With locknut | Yes |
| Snapping in opening | No |
| Multi seal area | No |
| Flat cable coupling | No |
| With strain relief | Yes |
| Separable screw gland | No |
| Operating temperature | -20–120 °C |
| Explosion-tested version | No |
| For armoured cable | No |
| EMC-version | No |
| Screened | No |
| Colour | Grey |
| Country of origin | Germany |
