cBallast
Industrial Parts Catalog
Datasheet generated 2026-10-07
sales@cballast.com
cballast.com

Eaton T0-2-8241/XZ Reversing Switch 1-Pole 3-Step 20A

Eaton · Switchgear & Protection · Disconnect Switches · Ireland · eaton.com
Part Number
T0-2-8241/XZ  ·  HS 8536.50
Eaton T0-2-8241/XZ Reversing Switch 1-Pole 3-Step 20A

Eaton T0-2-8241/XZ is a rotary step switch with a zero position, configured as a 1-pole 3-step combination switch. It carries a rated uninterrupted current of 20 A at up to 690 V AC and uses a toggle-style actuator with four switch positions. The device suits control-panel duty for motor, heater or transformer step selection and is available for rear, front or intermediate mounting.

Technical Specifications

Manufacturer part number (MPN)T0-2-8241/XZ
EAN / GTIN4015080117599
Sales unitpcs
Eaton catalogue number011759
Depth58 mm
Height48 mm
Width48 mm
Weight0.088 kg
CertificationsCE
Actuator typeToggle
Number of switch positions4
Ambient operating temperature - max50 °C
Ambient operating temperature - min-25 °C
Ambient operating temperature (enclosed) - max40 °C
Ambient operating temperature (enclosed) - min-25 °C
Climatic proofingDamp heat, cyclic, to IEC 60068-2-30; Damp heat, constant, to IEC 60068-2-78
Control circuit reliability1 failure per 100,000 switching operations statistically determined, at 24 V DC, 10 mA)
Number of contacts3
Rated operating voltage (Ue) at AC - max690 V
Rated uninterrupted current (Iu)20 A
Number of polesSingle-pole
Degree of protection (front side)IP00; NEMA Other
Mounting methodRear mounting
Mounting positionAs required
Number of contact units2
Overvoltage categoryIII
Pollution degree3
Suitable forGround mounting; Intermediate mounting; Front mounting
Switching angle45 °
TypeControl switch
Short-circuit protection rating20 A gG/gL, Fuse, Contacts
Type of switchLevel switch
Max. rated operation voltage Ue AC690 V
Rated permanent current Iu20 A
With zero (off) positionNo
With retraction in 0-positionNo
Device constructionBuilt-in device
Suitable for floor mountingYes
Suitable for front mountingYes
Suitable for distribution board installationNo
Suitable for intermediate mountingYes
Complete device in housingNo
Front shield size48x48 mm
Degree of protection (IP), front sideIP00
Country of originUnited Kingdom

Properties

MOQ1

Cross-References

Attached Documents