Eaton T0-1-8220/XZ combination single-pole reversing switch without 0 position, 2 steps, rated 20 A at AC-1 and 4 kW at AC-3 400 V. Short thumb-grip actuator; plastic enclosure; IP65 front and rear mounting; screw main-circuit connection.
Eaton T0-1-8220/XZ combination single-pole reversing switch without 0 position, 2 steps, rated 20 A at AC-1 and 4 kW at AC-3 400 V. Short thumb-grip actuator; plastic enclosure; IP65 front and rear mounting; screw main-circuit connection.
| Manufacturer part number (MPN) | T0-1-8220/XZ |
| EAN / GTIN | 4015080095637 |
| Sales unit | pcs |
| Eaton catalogue number | 009563 |
| Depth | 48 mm |
| Height | 48 mm |
| Width | 48 mm |
| Weight | 0.07 kg |
| Certifications | CE |
| Actuator type | Short thumb-grip |
| Number of auxiliary contacts (change-over contacts) | 0 |
| Number of auxiliary contacts (normally closed contacts) | 0 |
| Number of auxiliary contacts (normally open contacts) | 0 |
| Number of contacts | 2 |
| Rated operational current (Ie) at AC-21, 440 V | 20 A |
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V | 11.5 A |
| Rated operational power at AC-3, 380/400 V, 50 Hz | 4 kW |
| Rated uninterrupted current (Iu) | 20 A |
| Enclosure material | Plastic |
| Number of poles | Single-pole |
| Degree of protection | IP65; NEMA 12 |
| Degree of protection (front side) | IP65; NEMA 12 |
| Model | Reverser |
| Mounting method | Rear mounting |
| Mounting position | As required |
| Number of contact units | 1 |
| Overvoltage category | III |
| Pollution degree | 3 |
| Suitable for | Ground mounting; Intermediate mounting; Front mounting |
| Switching angle | 90 ° |
| Rated operation power at AC-3, 400 V | 4 kW |
| Rated permanent current Iu | 20 A |
| Rated operation current Ie at AC-3, 400 V | 11.5 A |
| With zero (off) position | No |
| Housing material | Plastic |
| With retraction in 0-position | No |
| Degree of protection (IP), front side | IP65 |
| Type of electrical connection of main circuit | Screw connection |
| Suitable for floor mounting | Yes |
| Suitable for front mounting | Yes |
| Suitable for distribution board installation | No |
| Suitable for intermediate mounting | Yes |
| Complete device in housing | No |
| Country of origin | United Kingdom |
| MOQ | 1 |