Danfoss KP5 high-pressure switch, code 060-133466. Regulating range 8 to 32 bar, differential 3 bar, manual maximum (latching) reset, SPDT snap-action contact. 6 mm solder ODF (female) connection, IP30 enclosure, max test pressure 35 bar. High-discharge-pressure compressor safety cut-out; this variant has manual-max reset and a 6 mm solder connection, distinct from the 1/4 in solder/flare KP5 builds already catalogued. Carries wide marine classification approval.
| Type | KP5 high-pressure switch |
| Code number | 060-133466 |
| Regulating range | 8 to 32 bar |
| Differential | 3 bar (fixed) |
| Reset | manual maximum (latching) |
| Contact system | SPDT (single-pole double-throw) |
| Contact load | AC-15 10 A/400 V; AC-1/AC-3 16 A/400 V |
| Connection | 6 mm solder ODF, female |
| Max test pressure | 35 bar |
| Enclosure | IP30 |
| Ambient temperature | -40 to +65 °C |
| Approvals | BV, DNV, GL, LR, RINA, CE, EAC, UL |
| EAN | 5702428832571 |
| Net weight | 0.329 Kilogram |
| Product group | Switches and thermostats |
| Amb | |
| Temp | |
| Note | 80 °C/176 °F for max 120 min |
| Ambient temperature range [°C] [max] | 65 °C |
| Ambient temperature range [°C] [min] | -40 °C |
| Ambient temperature range [°F] [max] | 149 °F |
| Ambient temperature range [°F] [min] | -40 °F |
| Application note | Not applicable for liquid line |
| Approval | BV |
| CE mark | Yes |
| China RoHS compliance | Yes |
| Contact function | SPDT |
| Contact rating | AC15=10 A, 400 V |
| Differential [bar] | 3 bar |
| Differential [psi] | 43 psi |
| EEE category | 5 small equipment (any external dimension < 50 cm) |
| Electrical connection | Rubber cable gland |
| Electrical connection size | 6-14 mm |
| EN 60947 electrical properties | Insulation: 400V |
| EN 60947 wiring properties | Flex, ferrules: 0.5-1.5 mm2 |
| Enclosure rating IP | IP30 |
| Enclosure rating Nema (~) | 1 |
| Equipment | Special connector |
| EU RoHS compliance | Yes |
| In scope of WEEE | Yes |
| Lubricants compatibility | Oilfree applications |
| Max. test pressure [bar] Pe | 35 bar |
| Max. test pressure [psig] | 510 psig |
| Max. Working Pressure [bar] | 35 bar |
| Max. Working Pressure [psig] | 510 psig |
| Oil free refrigerants | R134a |
| Pressure connection notes | Soft and 80mm long |
| Pressure connection size | 6 mm |
| Pressure connection standard | EN 1254-1 |
| Pressure connection type | Solder, ODF |
| Pressure Male/Female | Female |
| Pressure sensing element | Bellows |
| REACH Candidate List substances | Lead (CAS no. 7439-92-1) |
| Refrigerants | R113 |
| Regulation range [bar] Pe [max] | 32 bar |
| Regulation range [bar] Pe [min] | 8 bar |
| Regulation range [psig] Pe [max] | 464 psig |
| Regulation range [psig] Pe [min] | 116 psig |
| Reset function | Manual Max |
| UL approval file name | E31024 |
| UL approved refrigerants | R113 |
| UL mark | Yes |
| Material | Steel/zinc-plated housing; bellows pressure element |
| Pressure rating | max test 35 bar |
| Temperature range | -40 to +65 °C |
| IP rating | IP30 |
| Thread standard | 6 mm solder ODF, female |
| MOQ | 1 |
High-pressure (HP) safety cut-out; manual-maximum reset LATCHES on a high-pressure trip and must be reset by hand — choose auto vs manual reset deliberately. The 6 mm solder connection distinguishes this code from the 1/4 in solder KP5 060-118066 and 1/4 in flare KP5 060-121291/060-121266. Verify reset type, connection size and pressure side before ordering.