Danfoss KP34 low-pressure switch (code 060-216366). Regulating range 0.14 to 1.07 bar, fixed differential 0.21 bar, manual reset on max, SPDT snap-action contact. G1/2 (ISO 228-1) male connection, IP30 enclosure, ambient -40 to +65 °C. Max working pressure 4 bar, max test pressure 6 bar. Manual reset locks out on over-pressure for safety limiting.
| Type | KP34 low-pressure switch |
| Code number | 060-216366 |
| Regulating range | 0.14 to 1.07 bar |
| Differential | 0.21 bar (fixed) |
| Max working pressure (PB) | 4 bar |
| Max test pressure (Pe) | 6 bar |
| Reset | manual (max), lock-out on over-pressure |
| Contact system | SPDT (single-pole double-throw) |
| Contact load | 16 A resirigide, single phase (120 Vac: 16 FLA / 96 LRA / 3 A pilot duty) |
| Connection | G1/2 (ISO 228-1) male |
| Enclosure | IP30 |
| Ambient temperature | -40 to +65 °C (80 °C max 120 min) |
| Pressure element | bellows |
| Product group | Switches and thermostats |
| Max. test pressure | 87.0 psig |
| Max. test pressure Pe | 6.0 bar |
| Approval | CCC; CE; EAC; LLC CDC EURO-TYSK; LVD; RINA; RMRS; RoHS China; c UL us UL353, CS C22.2; c UL us UL873, CS C22.2 |
| UL approval file name | E31024; MH27572 |
| UL approved refrigerants | R1234yf; R1234ze(E); R452B; R454A; R454C; R455A |
| UL mark | Yes |
| CE mark | Yes |
| REACH candidate-list substances | Lead (CAS no. 7439-92-1); Cadmium oxide (CAS no.1306-19-0) |
| Net weight | 0.476 kg |
| EAN | 5702423263769 |
| Amb | |
| Temp | |
| Note | 80 °C/176 °F for max 120 min |
| Contact function | SPDT |
| Contact rating | 120Vac,16FLA,96LRA,3APilotDuty; 16 A resistive, single phase; 240 V AC, 8 FLA, 48 LRA; 240V dc,12W pilot duty(0.05 A); 8 A resistive, single phase |
| EEE category | 5 small equipment (any external dimension < 50 cm) |
| Electrical connection | Rubber cable gland |
| Electrical connection size | 6-14 mm |
| EN 60947 electrical properties | Insulation: 400V; Pollution degree: 3; Rated impulse voltage: 4 kV; Short circuit prot, fuse: 16A |
| EN 60947 wiring properties | Flex, ferrules: 0.5-1.5 mm2; Flex, no ferrules: 0.7-2.5 mm2; Solid/stranded: 0.75-2.5 mm2 |
| Enclosure rating IP | IP30 |
| Enclosure rating Nema (~) | 1 |
| In scope of WEEE | Yes |
| Pressure connection size | 1/2 |
| Pressure connection standard | ISO 228-1 |
| Pressure connection type | G |
| Pressure Male/Female | Male |
| Pressure sensing element | Bellows |
| Material | Steel/zinc-plated housing; bellows pressure element |
| Pressure rating | PB 4 bar; max test 6 bar |
| Temperature range | -40 to +65 °C (80 °C max 120 min) |
| IP rating | IP30 |
| Thread standard | G1/2 (ISO 228-1) male |
| MOQ | 1 |
Low-pressure safety switch with manual reset lock-out on over-pressure. SPDT contact wired NO or NC. G1/2 (ISO 228-1) male connection. Verify range/differential against the set point before ordering.