Danfoss KDC 200 A 2 multifunctional compressor valve (pressure control valve), code 148G3836. Angle-way valve with butt-weld connections to ASME B36.10M Schedule 40, nominal size 200 mm (8 in), for industrial refrigeration compressor packages. The KDC controls the compressor discharge pressure to ensure a fast build-up of pressure and lubrication (oil) pressure at start-up, and simultaneously acts as a check valve in the compressor discharge line to prevent reverse flow when the compressor stops. The valve is force-controlled: it opens when the pressure downstream (oil separator / discharge side) rises to 2 bar (29 psi) above the suction pressure, at which point the spring is compressed and the cone lifts. This 2 bar spring setting suits high-pressure compressors. Housing and bonnet are low-temperature steel with stainless-steel bolts; the valve is mounted vertically with the cone downward and carries a threaded NPT 1/4 in pilot-line connection on the bonnet. Maximum working pressure 40 bar (580 psig); media temperature range -50 °C to 150 °C (-58 °F to 302 °F). Flow coefficient Kv 757 m³/h (Cv 878 gal/min) fully open. Suitable for hydrocarbon (HC) refrigerants. PED category II. CE marked; EAC (EAEU) certified.