SKF 6030M Deep-groove ball bearing

SKF · Bearings & Power Transmission · Deep Groove Ball Bearings · Sweden · skf.com

Part Number
6030M · HS 8482.10

SKF 6030M deep-groove ball bearing. Deep-groove ball bearing designed for combined radial and moderate axial load, high running speed and low frictional torque. Manufactured to ISO 492 (Class Normal / P6 / P5) with standard C0 radial internal clearance unless a suffix declares otherwise. Available in open, single-shielded (Z), double-shielded (2Z), single-lip contact-sealed (RSH / RS1), and double-lip contact-sealed (2RSH / 2RS1) execution. Bore, outside diameter and width follow the ISO 15 dimension plan. Boundary plan per ISO 15: bore d = 150 mm, outside diameter D = 225 mm, width B = 35 mm.

Technical Specifications

Type	Deep-groove ball bearing
Designation	SKF 6030M
Standard	ISO 15 / DIN 623 dimension plan; ISO 492 Class Normal precision
Bore d	150 mm
Outside diameter D	225 mm
Width B	35 mm
HS code	8482.10

Properties

Material	Bearing steel — 100Cr6 (through-hardened) or SNR-nitrided; cage as declared by suffix
Temperature range	-30 to +120 °C standard grease
Primary standard	ISO 15 / ISO 492 / DIN 623
Dimensions	150 × 225 × 35 mm (bore d × OD D × width B)
MOQ	1

Compatibility

ISO 15 boundary-plan interchange — the numeric bore-code block is portable across every ISO 15 bearing manufacturer (SKF, Timken, NSK, NTN, FAG, Koyo, NACHI). Confirm suffix compatibility on cage, seal, clearance and precision class before substitution.

Standards

ISO 15
ISO 492
DIN 623

Cross-References

Timken 6030
NSK 6030
NTN 6030
FAG 6030
Koyo 6030
NACHI 6030

Attached Documents

SKF 6030M Deep-groove ball bearing — Specification sheet