| Manufacturer part number (MPN) | 6EP1334-3BA10 EAN / GTIN: 4025515152880 Sales unit: pcs type of the power supply network: 1-phase and 2-phase AC supply voltage 1 at AC: 120 ... 230 V supply voltage 2 at AC: 230 ... 500 V input voltage 1 at AC: 85 ... 264 V input voltage 2 at AC: 176 ... 550 V overvoltage overload capability: 1300 Vpeak, 1.3 ms buffering time for rated value of the output current in the event of power failure minimum: 25 ms line frequency: 50/60 Hz input current — at rated input voltage 120 V: 4.4 A input current — at rated input voltage 230 V: 2.4 A input current — at rated input voltage 500 V: 1.1 A current limitation of inrush current at 25 °C maximum: 35 A I2t value maximum: 4 A²·s fuse protection type: T 6.3 A (not accessible) output voltage at DC rated value: 24 V adjustable output voltage: 24 ... 28.8 V relative overall tolerance of the voltage: 3 % relative control precision of the output voltage — on slow fluctuation of input voltage: 0.1 % residual ripple — maximum: 50 mV type of signal at output: relay contact (normally open); 30 V DC/0.1 A response delay maximum: 1 s voltage increase time of the output voltage — typical: 50 ms output current — rated value: 10 A output current — rated range: 0 ... 10 A; +60 ... +70 °C: Derating 2%/K (at 120 V, 230 V) or 3.5%/K (at 400 V) supplied active power typical: 240 W short-term overload current — at short-circuit during operation typical: 30 A constant overload current — on short-circuiting during the start-up typical: 12 A power loss [W] — at rated output voltage for rated value of the output current typical: 24 W power loss [W] — during no-load operation maximum: 6 W design of the overvoltage protection: < 35 V design of short-circuit protection: constant current characteristic approx. 12 A or latching shutdown enduring short circuit current RMS value — typical: 12 A leakage current — maximum: 3.5 mA protection class IP: IP20 connection method — at input: L |