| Manufacturer part number (MPN) | 6ES7132-6BH01-0BA0 |
| EAN / GTIN | 4047623408574 |
| Sales unit | pcs |
| Product type designation | DQ 16x24VDC/0.5 ST |
| HW functional status | from FS21 |
| Usable BaseUnits | BU type A0 |
| Color code for module-specific color-coded label | CC00 |
| I&M data | Yes; I&M0 to I&M3 |
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Current consumption, max. | 30 mA; without load |
| Power loss, typ. | 1 W |
| Address space per module, max. | 2 byte; + 2 bytes for QI information |
| Type of digital output | Source output (PNP, current-sourcing) |
| Number of digital outputs | 16 |
| Output type acc. to IEC 61131, type 0.5 | Yes |
| Short-circuit protection | Yes; Electronic |
| Short-circuit response threshold, typ. | 1 A; 0.7 to 1.3 A |
| Open-circuit detection | Yes |
| Switching capacity with resistive load, max. | 0.5 A |
| Switching capacity on lamp load, max. | 5 W |
| Load resistance range lower limit | 48 Ω |
| Load resistance range upper limit | 12 kΩ |
| Output current for signal "1" rated value | 0.5 A |
| Output current for signal "0" residual current, max. | 0.1 mA |
| Output delay with resistive load "0" to "1", typ. | 50 µs |
| Output delay with resistive load "1" to "0", typ. | 100 µs |
| Switching frequency with resistive load, max. | 100 Hz |
| Switching frequency on lamp load, max. | 10 Hz |
| Total current of the outputs per channel, max. | 0.5 A |
| Total current of the outputs per module, max. | 8 A |
| Cable length shielded, max. | 1 000 m |
| Cable length unshielded, max. | 600 m |
| Diagnostics function | Yes |
| Diagnostic alarm | Yes |
| Isolation tested with | 707 V DC (type test) |
| Ambient temperature horizontal installation, min. | -30 °C; < 0 °C as of FS03 |
| Ambient temperature horizontal installation, max. | 60 °C |
| Ambient temperature vertical installation, max. | 50 °C |
| Installation altitude above sea level, max. | 5 000 m |
| Dimensions — Width | 15 mm |
| Dimensions — Height | 73 mm |
| Dimensions — Depth | 58 mm |
| Weight, approx. | 30 g |
| Supporting protocol for EtherCAT | Yes |
| Voltage type (supply voltage) | DC |
| Type of voltage (input voltage) | DC |
| Output current | 0.5 A |
| Permitted voltage at output | 19.2–28.8 V |
| Type of output voltage | DC |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFIsafe | No |
| Degree of protection (IP) | IP20 |
| Type of electric connection | Spring clamp connection |
| SIL according to IEC 61508 | 2 |
| Performance level according to EN ISO 13849-1 | Level d |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | None |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Country of origin | Germany |