Schneider Electric ABL8RPS24100 Phaseo ABL8 regulated SMPS, 100-240V AC input, 24V DC / 10A / 240W output. DIN rail mount, electronic protections.
Schneider Electric ABL8RPS24100 Phaseo ABL8 regulated SMPS, 100-240V AC input, 24V DC / 10A / 240W output. DIN rail mount, electronic protections.
| Series | Phaseo ABL8 RPS |
| Input Voltage | 100-240V AC, 1-phase, 50/60Hz |
| Output Voltage | 24V DC regulated |
| Output Current | 10A |
| Output Power | 240W |
| Efficiency | Approx 91% |
| Protections | Short-circuit, overcurrent, over-temperature, overvoltage |
| Mounting | 35mm DIN rail |
| Ip Rating | IP20 |
| Voltage | 24 V |
| Range of product | Modicon Power Supply |
| Product or component type | Power supply |
| Power supply type | Regulated switch mode |
| Nominal input voltage | 100...120 V AC single phase, terminal(s): N-L1; 200...500 V AC phase to phase, terminal(s): L1-L2 |
| Rated power in W | 240 W |
| Output voltage | 24 V DC |
| Power supply output current | 10 A |
| Permissible temporary current boost | 1.5 x In (for 4 s) |
| Anti-harmonic filter | Low frequency harmonic currents |
| Input voltage limits | 170...550 V AC; 85...132 V AC |
| Inrush current | 30 A |
| Power factor | 0.68 at 240 V AC; 0.69 at 120 V AC |
| Efficiency | 87 % |
| Output voltage adjustment | 24...28.8 V adjustable |
| Power dissipation in W | 31 W |
| Provided equipment | Power factor correction filter conforming to IEC 61000-3-2 |
| Output protection type | Against overload, protection technology: manual or automatic reset; Against overvoltage, protection technology: 30...32 V, manual reset; Against short-circuits, protection technology: manual or automatic reset; Against undervoltage, protection technology: tripping if U < 21.6 V; Thermal, protection technology: automatic reset |
| Connections - terminals | Removable screw terminal block: 2 x 2.5 mm², for diagnostic relay; Screw type terminals: 3 x 0.5...3 x 4 mm², (22 AWG...12 AWG) for input connection; Screw type terminals: 1 x 0.5...1 x 4 mm², (22 AWG...12 AWG) for input ground connection; Screw type terminals: 4 x 0.5...4 x 4 mm², (22 AWG...12 AWG) for output connection; Screw type terminals: 1 x 0.5...1 x 4 mm², (22 AWG...12 AWG) for output ground connection |
| Status LED | 1 LED (green and red) output voltage; 1 LED (green, red and orange) output current |
| Depth | 145 mm |
| Height | 125 mm |
| Width | 86 mm |
| Product weight | 1 kg |
| Output coupling | Parallel; Series |
| Marking | CE |
| Mounting support | 35 x 7.5 mm symmetrical DIN rail; 35 x 15 mm symmetrical DIN rail |
| Operating position | Vertical |
| Supply | SELV conforming to IEC 60950-1; SELV conforming to IEC 60204-1; SELV conforming to IEC 60364-4-41 |
| Dielectric strength | 3500 V with between input and ground; 4000 V with between input and output; 500 V with between output and ground |
| Standards | UL 508; CSA C22.2 No 60950-1; EN/IEC 62368-1 |
| Product certifications | CCSAus; EAC; KC; RCM; UL |
| Environmental characteristic | EMC conforming to IEC 61000-6-1; EMC conforming to IEC 61000-6-3; EMC conforming to EN 55024; EMC conforming to IEC 61000-6-4; EMC conforming to EN/IEC 61204-3; Safety conforming to IEC 60950-1; Safety conforming to EN/IEC 61204-3 |
| Operating altitude | 2000 m |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Ambient air temperature for operation | 50…60 °C with derating factor mounting position A < 2000 m; -25…50 °C without derating mounting position A < 2000 m |
| Number of Units in Package 1 | 1 |
| Number of Units in Package 2 | 60 |
| Country of origin | PH |
| Warranty (in months) | 18 |
| EAN | 3389119405621 |
| Primary standard | IEC 61204; EN 60950-1 |
| MOQ | 1 |
DIN-rail 24V DC SMPS. Suits larger control panels with multiple PLCs/HMIs and sensor loads.