Schneider Electric METSEPM5341 PM5341 power analyser - Ethernet - oppt 31st H - 256K 2DI/2DO MID.
Schneider Electric METSEPM5341 PM5341 power analyser - Ethernet - oppt 31st H - 256K 2DI/2DO MID.
| Manufacturer part number (MPN) | METSEPM5341 |
| EAN / GTIN | 3606480614057 |
| Sales unit | pcs |
| Package quantity | 12 pcs |
| Range | PowerLogic |
| Product name | PowerLogic PM5000 |
| Product or component type | Power meter |
| Device short name | PM5341 |
| Power quality analysis | up to the 31st harmonic |
| Device application | Power monitoring; Multi-tariff |
| Type of measurement | Current; Voltage; Frequency; Power factor; Energy; Active and reactive power |
| [Us] rated supply voltage | 90...450 V AC 45...65 Hz; 100...300 V DC |
| Network frequency | 50 Hz; 60 Hz |
| [In] rated current | 5 A; 1 A |
| type of network | 1P + N; 3P + N; 3P |
| Maximum power consumption in VA | 11 VA at 415 V |
| Ride-through time | 80 ms 120 V AC typical; 100 ms 230 V AC typical; 100 ms 415 V AC typical; 50 ms 125 V DC typical |
| Display type | Monochrome graphic LCD |
| Display resolution | 128 x 128 pixels |
| Sampling rate | 64 samples/cycle |
| Measurement current | 5…8500 mA |
| Analogue input type | Voltage (impedance 10 MOhm); Current (impedance <= 0.3 mOhm) |
| Measurement voltage | 35…760 V AC 45...65 Hz between phases; 20…400 V AC 45...65 Hz between phase and neutral |
| Frequency measurement range | 45…65 Hz |
| Number of inputs | 2 digital |
| Measurement accuracy | Active energy +/- 0.5 %; Reactive energy +/- 2 %; Active power +/- 0.5 %; Apparent power +/- 0.5 %; Frequency +/- 0.05 %; Power factor +/- 0.5; Current +/- 0.5 %; Voltage +/- 0.5 %; Apparent energy +/- 0.5 %; Reactive power +/- 2 % |
| Accuracy class | Class 0.5S active energy conforming to IEC 62053-22 |
| Number of outputs | 2 relay; 2 digital |
| Information displayed | Tariff (4) |
| Communication port protocol | Modbus TCP/IP at 10/100 Mbit/s, insulation 2500 V; BACnet IP |
| Communication port support | ETHERNET |
| Data recording | Alarm logs; Time stamping; Min/max of instantaneous values; Event logs; Maintenance logs; Data logs |
| Memory capacity | 256 kB |
| Connections - terminals | Voltage circuit: screw terminal block4; Control circuit: screw terminal block2; Current transformer: screw terminal block6; Input/output circuit: screw terminal block6; Relay output: screw terminal block4; Ethernet network: RJ45 connector |
| mounting mode | Flush-mounted |
| Mounting support | Framework |
| Standards | IEC 60529; UL 61010-1; IEC 61557-12:2015; IEC 62053-24; IEC 62053-22:2020; EN 50470-3; EN 50470-1; IEC 62053-23:2020; IEC 62052-11:2020; IEC 62052-31:2015 |
| Product certifications | CE conforming to IEC 61010-1; CULus conforming to UL 61010-1; MID conforming to EN 50470-1; MID conforming to EN 50470-3 |
| Width | 96 mm |
| Depth | 72 mm |
| Height | 96 mm |
| Product weight | 430 g |
| Electromagnetic compatibility | Limits for harmonic current emissions class A conforming to IEC 61000-3-2; Electrostatic discharge level 4 conforming to IEC 61000-4-2; Conducted RF disturbances level 3 conforming to IEC 61000-4-6; Magnetic field at power frequency level 4 conforming to IEC 61000-4-8; Conducted and radiated emissions class B conforming to EN 55022 |
| IP degree of protection | IP54 display: conforming to IEC 60529; IP30 rear: conforming to IEC 60529 |
| Relative humidity | 5…95 % at 50 °C non-condensing |
| Pollution degree | 2 |
| Ambient air temperature for operation | -25…70 °C meter; -20…70 °C display; -25…-20 °C (with reduced performance) display |
| Ambient air temperature for storage | -40…85 °C |
| Operating altitude | 2000 m CAT III; 3000 m CAT II |
| Number of Units in Package 1 | 1 |
| Number of Units in Package 2 | 12 |
| Country of origin | IN |
| Warranty (in months) | 18 |
| Measured value memory | Yes |
| Power factor | Yes |
| Suitable for RJ plug | Yes |
| Step angle (cos phi) | Yes |
| Harmonics measurement | Yes |
| Pulse output | Optical |
| Calibrated | No |
| Max. current (Imax) | 20 A |
| Measurement type load profile | Yes |
| With communication interface KNX | No |
| With communication interface M-Bus | No |
| With communication interface RS-485 | No |
| Model | Measurement transformer |
| Mounting method | Front mounting |
| Nominal current (In) | 5 A |
| Pole type | Three conductor/four conductor |
| Apparent power | Yes |
| Ampere meter | Yes |
| Reactive power meter | Yes |
| With rotational speed meter | No |
| Frequency meter | Yes |
| Pulse counter | No |
| Voltmeter | Yes |
| Effective power measurement device | Yes |
| Accuracy class active energy according to IEC 62053-22 | 0.5S |
| Sampling frequency | 6400 Hz |
| Number of voltage measurement inputs | 4 |
| Number of current measurement inputs | 6 |
| Voltage type (supply voltage) | AC/DC |
| Display | LCD |
| Remote display | No |
| Number of digital inputs | 2 |
| Number of digital outputs | 4 |
| Number of Ethernet connections | 1 |
| Supporting protocol for IEC 61850 Ethernet | No |
| Supporting protocol for OPC UA PubSub | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for Modbus | Yes |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for other bus systems | Yes |
| With audit logging (audit log) | No |
| With firmware signature | No |
| With logging of security events (security event log) | Yes |
| With Role Based Access Control (RBAC) | No |
| Web server with HTTPS transfer protocol | No |
| MOQ | 1 |