Schneider Electric BMXDDI3232H X80 32-channel input module, 12 / 24VDC Sink/Source Input. For rugged environments.
Schneider Electric BMXDDI3232H X80 32-channel input module, 12 / 24VDC Sink/Source Input. For rugged environments.
| Manufacturer part number (MPN) | BMXDDI3232H |
| EAN / GTIN | 3606481946720 |
| Sales unit | pcs |
| Package quantity | 10 pcs |
| Voltage | 12-24 V DC |
| Range of product | Modicon X80 |
| Product or component type | Discrete input module |
| Device application | Industrial application in severe environment |
| Discrete input number | 32 |
| Discrete input voltage | 12 V DC for isolated; 24 V DC for isolated |
| Discrete input logic | Positive or negative |
| Input wiring mode | 2 or 3 wires |
| Discrete input current | 3.3 mA at 12 V DC; 3.3 mA at 24 V DC |
| Voltage state 1 guaranteed | >= 10 V; <= -10 V |
| Voltage state 0 guaranteed | = -5 V |
| Current state 1 guaranteed | >= 2 mA |
| Current state 0 guaranteed | <= 1.5 mA |
| Input impedance | 7270 Ohm |
| Insulation resistance | > 10 MOhm 500 V DC |
| DC typical response time | 4 ms |
| DC maximum response time | 7 ms |
| Paralleling of outputs | Yes |
| Sensor power supply | : 19…30 V |
| Typical current consumption | 100 mA DC; 7.6 mA at 24 V DC |
| Current consumption | 130 mA at 3.3 V DC; at 24 V DC |
| Power dissipation in W | 4.7 W |
| Isolation between channels and bus | 1500 V for 1 minute |
| Hot swapping fallback | Yes |
| MTBF reliability | 2200000 H |
| Voltage detection threshold | 19 V DC sensor OK |
| Local signalling | 1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O |
| Height | 134.6 mm |
| Width | 32 mm |
| Depth | 86 mm |
| Product weight | 0.138 kg |
| IP degree of protection | IP20 |
| Protective treatment | Conformal coating |
| Marking | CE; UKCA; CULus; RCM; EAC |
| Product certifications | ATEX zone 2; IECEx zone 2; CCC Ex zone 2 (pending); CULus HazLoc |
| Standards | IEC 61131-2 |
| Directives | 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility |
| Dielectric strength | 1500 V AC at 50/60 Hz 1 minute, primary/secondary; 1500 V AC at 50/60 Hz 1 minute, between group of channels |
| Ambient air temperature for operation | -25…70 °C |
| Ambient air temperature for storage | -40…85 °C |
| Relative humidity | 5…95 % at -25…70 °C without condensation |
| Operating altitude | 0...2000 m; 2000...5000 m with derating |
| Pollution degree | 2 |
| Environmental characteristic | Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2 |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Number of Units in Package 1 | 1 |
| Number of Units in Package 2 | 10 |
| Country of origin | ID |
| Warranty (in months) | 18 |
| Supply voltage DC | 24 V |
| Voltage type (supply voltage) | DC |
| Number of digital inputs | 32 |
| Digital inputs configurable | No |
| Digital outputs configurable | No |
| Input current at signal 1 | 3.3 mA |
| Permitted voltage at input | 19–30 V |
| Type of voltage (input voltage) | DC |
| Type of digital output | None |
| Permitted voltage at output | 19–30 V |
| Type of output voltage | DC |
| Short-circuit protection, outputs available | No |
| Redundancy | No |
| Type of electric connection | Plug-in connection |
| Time delay at signal change | 4–7 ms |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust | None |
| MOQ | 1 |