Schneider Electric STBAVI1270K STB kit 2 in analog, +/-10V, 12bit.
Schneider Electric STBAVI1270K STB kit 2 in analog, +/-10V, 12bit.
| Manufacturer part number (MPN) | STBAVI1270K |
| EAN / GTIN | 3595863988918 |
| Sales unit | pcs |
| Range of product | Modicon STB distributed I/O solution |
| Product or component type | Standard analog input kit |
| Kit composition | STBXBA1000 base; STBXTS1100, 6-terminal screw type connector; STBAVI1270 module; STBXTS2100, 6-terminal spring clamp connector |
| Product compatibility | Mounting base STBXBA1000; Power distribution module STBPDT3100/3105 |
| Analogue input number | 2 |
| Type of filter | Single low pass input filter 25 Hz |
| Analogue output number | 0 |
| Absolute maximum input | 50 V |
| Cold swapping | Yes |
| Fallback status | State 0 basic NIMs; User configurable standard NIMs |
| Data format | IEC 61131-2; EN 61131-2 |
| Update time | 10 ms |
| Integral linearity | +/- 0.2 %FS |
| Differential linearity | Monotonic |
| Maximum supply current for sensors | 100 mA per input channels |
| Absolute accuracy error | +/- 0.5 % of full scale 25 °C |
| Addressing requirement | 4 input words |
| Supply | Power distribution module |
| Analogue input type | Voltage +/- 10 V |
| Analogue input resolution | 11 bits + sign |
| Input impedance | 400 kOhm |
| Input protection type | Protected against short-circuit |
| Temperature drift | +/-0.01 %/°C |
| Typical current consumption | 30 mA at 5 V DC for logic bus |
| Isolation between channels and bus | 1500 V for 1 minute |
| Hot swapping fallback | Yes for standard NIMs |
| Local signalling | 1 LED green for module status (RDY); 1 LED red for module error (ERR) |
| Height | 18.4 mm |
| Width | 128.3 mm |
| Depth | 70 mm |
| Product weight | 0.115 kg |
| Overvoltage category | II |
| IP degree of protection | IP20 |
| Marking | CE |
| Product certifications | CSA; C-Tick; UL; ATEX Cat 3G; FM Class 1 Division 2 |
| Ambient air temperature for operation | -25…70 °C (without derating) |
| Ambient air temperature for storage | -40…85 °C without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Operating altitude | 2000 m |
| Pollution degree | 2 |
| Vibration resistance | +/-0.35 mm (f = 10…58 Hz); 3 gn (f = 58…150 Hz) on 35 mm DIN rail; 5 gn (f = 58…150 Hz) on 35 mm DIN rail |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.500 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 13.000 cm |
| Package 1 Weight | 138.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 28 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 4.326 kg |
| Country of origin | ID |
| Warranty (in months) | 18 |
| Certified for UL hazardous location division 1 | No |
| Certified for UL hazardous location division 2 | No |
| Certified for UL hazardous location group A (acetylene) | No |
| Certified for UL hazardous location group B (hydrogen) | No |
| Certified for UL hazardous location group C (ethylene) | No |
| Certified for UL hazardous location group D (propane) | No |
| Certified for UL hazardous location group E (metal dusts) | No |
| Certified for UL hazardous location class I | No |
| Certified for UL hazardous location class II | No |
| Certified for UL hazardous location class III | No |
| Supporting protocol for EtherCAT | No |
| Voltage type (supply voltage) | AC/DC |
| Input, current | Yes |
| Input, voltage | No |
| Input, resistor | No |
| Input, resistance thermometer | No |
| Input, thermocouple | No |
| Input signal, configurable | Yes |
| Resolution of the analogue inputs | 11 Bit |
| Output, current | No |
| Output, voltage | No |
| Output signal configurable | No |
| Resolution of the analogue outputs | 11 Bit |
| Number of analogue inputs | 2 |
| Analogue inputs configurable | Yes |
| Analogue outputs configurable | No |
| Supporting protocol for TCP/IP | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| System accessory | Yes |
| Degree of protection (IP) | IP20 |
| Type of electric connection | Screw connection |
| Fieldbus connection over separate bus coupler possible | Yes |
| Suitable for rail mounting | Yes |
| Wall mounting/direct mounting | No |
| Front built-in possible | No |
| Rack-assembly possible | Yes |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 3G |
| MOQ | 1 |